[PDF] Thermodynamic Mechanism Of Mql Grinding With Nano Bio Lubricant eBook

Author : Changhe Li
Publisher : Springer Nature
Page : 412 pages
File Size : 23,47 MB
Release : 2023-12-01
Category : Technology & Engineering
ISBN : 981996265X

GET BOOK

This book discusses the thermodynamic mechanism of MQL grinding with nano-biological lubricant from the force, heat, surface integrity, and micro-morphology. It makes up the fatal defect of the lack of heat transfer capability of traditional MQL grinding. The machining accuracy, surface quality, especially surface integrity of the workpiece, are significantly improved; at the same time, the service life of the grinding wheel is increased and the working environment is improved. The general scope of the book’s content is the effects of MQL grinding with nano-bio-lubricant on grinding force, thermal mechanism, and surface. It provides a new method of sustainable green grinding for environment-friendly, resource-saving, and energy-efficient utilization and solves the technical bottleneck of the insufficient capacity in MQL heat transfer.

Author : Liu, Mingzheng
Publisher : IGI Global
Page : 412 pages
File Size : 33,93 MB
Release : 2024-05-02
Category : Science
ISBN :

GET BOOK

The achievement of high-efficiency and precise grinding of difficult-to-cut metals—like titanium alloys—is essential in the aerospace industry. However, the process often results in thermal damage to the workpiece surface, posing a significant technical challenge. While minimum quantity lubrication (MQL) has been used to aid titanium alloy grinding, its effectiveness is limited by insufficient heat dissipation and lubrication. As an alternative to normal temperature air for carrying micro-lubricants, Cryogenic air has shown promise in improving oil film heat transfer and lubrication performance in the grinding zone, thus reducing workpiece surface thermal damage. The experimental state of the technology demands more comprehensive studies on its effectiveness and on the underlying mechanisms. Thermodynamic Mechanism of Cryogenic Air Minimum Quantity Lubrication Grinding addresses these challenges by providing a theoretical framework for understanding and optimizing cryogenic air minimum quantity lubrication in grinding processes, particularly for titanium alloys. It explores the physical characteristics of lubricants under cryogenic conditions, the influence of low temperatures on atomization effects, droplet formation dynamics, and heat transfer mechanisms within the grinding zone. By establishing quantitative relationships between cryogenic air parameters and lubricant properties, the book lays a foundation for enhancing the cooling lubrication mechanism of cryogenic air MQL in grinding processes. Researchers, scholars, and graduate students in universities and research institutes focusing on machining will find this book invaluable, as it goes beyond the theoretical insights into practical solutions to enhance grinding efficiency and reduce thermal damage.

Author : Mohsen Sheikholeslami Kandelousi
Publisher : BoD – Books on Demand
Page : 320 pages
File Size : 25,16 MB
Release : 2018-08-22
Category : Science
ISBN : 1789235405

GET BOOK

In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.

Author : Jean Michel Martin
Publisher : John Wiley & Sons
Page : 246 pages
File Size : 14,98 MB
Release : 2008-04-30
Category : Science
ISBN : 0470987707

GET BOOK

The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Author : Alexandru Grumezescu
Publisher : Academic Press
Page : 928 pages
File Size : 11,97 MB
Release : 2016-09-28
Category : Science
ISBN : 0128043725

GET BOOK

Nanobiosensors: Nanotechnology in the Agri-Food Industry, Volume 8, provides the latest information on the increasing demand for robust, rapid, inexpensive, and safe alternative technologies that monitor, test, and detect harmful or potentially dangerous foods. Due to their high sensitivity and selectivity, nanobiosensors have attracted attention for their use in monitoring not only biological contaminants in food, but also potential chemical and physical hazards. This book offers a broad overview regarding the current progress made in the field of nanosensors, including cutting-edge technological progress and the impact of these devices on the food industry. Special attention is given to the detection of microbial contaminants and harmful metabolotes, such as toxins and hormones, which have a great impact on both humans and animal health and feed. Includes the most up-to-date information on nanoparticles based biosensors and quantum dots for biological detection Provides application methods and techniques for research analysis for bacteriological detection and food testing Presents studies using analytical tools to improve food safety and quality analysis

Author : Yong Ren
Publisher : BoD – Books on Demand
Page : 184 pages
File Size : 32,65 MB
Release : 2020-05-20
Category : Technology & Engineering
ISBN : 1789844185

GET BOOK

Microfluidics have aroused a new surge of interest in recent years in environmental and energy areas, and inspired novel applications to tackle the worldwide challenges for sustainable development. This book aims to present readers with a valuable compendium of significant advances in applying the multidisciplinary microfluidic technologies to address energy and environmental problems in a plethora of areas such as environmental monitoring and detection, new nanofluid application in traditional mechanical manufacturing processes, development of novel biosensors, and thermal management. This book will provide a new perspective to the understanding of the ever-growing importance of microfluidics.

Author : Steven Liang
Publisher : Springer
Page : 241 pages
File Size : 41,67 MB
Release : 2015-12-29
Category : Technology & Engineering
ISBN : 1489976450

GET BOOK

This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.

Author : M. S. Shunmugam
Publisher : Springer Nature
Page : 720 pages
File Size : 13,32 MB
Release : 2019-11-30
Category : Technology & Engineering
ISBN : 9813294256

GET BOOK

This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Author : Theo Mang
Publisher : John Wiley & Sons
Page : 1220 pages
File Size : 35,5 MB
Release : 2017-05-08
Category : Science
ISBN : 3527326707

GET BOOK

Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants