[PDF] Synthesis And Characterization Of Microporous Inorganic Membranes For Propylene Propane Separation eBook

Author : Xiaoli Ma
Publisher :
Page : 166 pages
File Size : 47,17 MB
Release : 2015
Category : Carbon
ISBN :

GET BOOK

Membrane-based gas separation is promising for efficient propylene/propane (C3H6/C3H8) separation with low energy consumption and minimum environment impact. Two microporous inorganic membrane candidates, MFI-type zeolite membrane and carbon molecular sieve membrane (CMS) have demonstrated excellent thermal and chemical stability. Application of these membranes into C3H6/C3H8 separation has not been well investigated. This dissertation presents fundamental studies on membrane synthesis, characterization and C3H6/C3H8 separation properties of MFI zeolite membrane and CMS membrane. MFI zeolite membranes were synthesized on a-alumina supports by secondary growth method. Novel positron annihilation spectroscopy (PAS) techniques were used to non-destructively characterize the pore structure of these membranes. PAS reveals a bimodal pore structure consisting of intracrystalline zeolitic micropores of ~0.6 nm in diameter and irregular intercrystalline micropores of 1.4 to 1.8 nm in size for the membranes. The template-free synthesized membrane exhibited a high permeance but a low selectivity in C3H6/C3H8 mixture separation. CMS membranes were synthesized by coating/pyrolysis method on mesoporous γ-alumina support. Such supports allow coating of thin, high-quality polymer films and subsequent CMS membranes with no infiltration into support pores. The CMS membranes show strong molecular sieving effect, offering a high C3H6/C3H8 mixture selectivity of ~30. Reduction in membrane thickness from 500 nm to 300 nm causes an increase in C3H8 permeance and He/N2 selectivity, but a decrease in the permeance of He, N2 and C3H6 and C3H6/C3H8 selectivity. This can be explained by the thickness dependent chain mobility of the polymer film resulting in final carbon membrane of reduced pore size with different effects on transport of gas of different sizes, including possible closure of C3H6-accessible micropores. CMS membranes demonstrate excellent C3H6/C3H8 separation performance over a wide range of feed pressure, composition and operation temperature. No plasticization was observed at a feed pressure up to 100 psi. The permeation and separation is mainly controlled by diffusion instead of adsorption. CMS membrane experienced a decline in permeance, and an increase in selectivity over time under on-stream C3H6/C3H8 separation. This aging behavior is due to the reduction in effective pore size and porosity caused by oxygen chemisorption and physical aging of the membrane structure.

Author : Reyes Mallada
Publisher : Elsevier
Page : 477 pages
File Size : 23,3 MB
Release : 2008-05-01
Category : Technology & Engineering
ISBN : 0080558003

GET BOOK

Approx.480 pages Approx.480 pages

Author : A.J. Burggraaf
Publisher : Elsevier
Page : 709 pages
File Size : 25,23 MB
Release : 1996-11-19
Category : Technology & Engineering
ISBN : 0080534708

GET BOOK

Inorganic membrane science and technology is a new field of membrane separation technology which until recently was dominated by the earlier field of polymer membranes. Currently the subject is undergoing rapid development and innovation. The present book describes the fundamental principles of both synthesis of inorganic membranes and membrane supports and also the associated phenomena of transport and separation in a semi-quantitative form. Features of this book: - Examples are given which illustrate the state-of-the-art in the synthesis of membranes with controlled properties - Future possibilities and limitations are discussed - The reader is provided with references to more extended treatments in the literature - Potential areas for future innovation are indicated. By combining aspects of both the science and technology of inorganic membranes this book serves as a useful source of information for scientists and engineers working in this field. It also provides some observations of important investigators who have contributed to the development of this subject.

Author : Leonard R. MacGillivray
Publisher : John Wiley & Sons
Page : 1210 pages
File Size : 33,84 MB
Release : 2014-09-19
Category : Science
ISBN : 1118931580

GET BOOK

Metal-Organic Frameworks (MOFs) are crystalline compounds consisting of rigid organic molecules held together and organized by metal ions or clusters. Special interests in these materials arise from the fact that many are highly porous and can be used for storage of small molecules, for example H2 or CO2. Consequently, the materials are ideal candidates for a wide range of applications including gas storage, separation technologies and catalysis. Potential applications include the storage of hydrogen for fuel-cell cars, and the removal and storage of carbon dioxide in sustainable technical processes. MOFs offer the inorganic chemist and materials scientist a wide range of new synthetic possibilities and open the doors to new and exciting basic research. Metal-Organic Frameworks Materials provides a solid basis for the understanding of MOFs and insights into new inorganic materials structures and properties. The volume also reflects progress that has been made in recent years, presenting a wide range of new applications including state-of-the art developments in the promising technology for alternative fuels. The comprehensive volume investigates structures, symmetry, supramolecular chemistry, surface engineering, recognition, properties, and reactions. The content from this book will be added online to the Encyclopedia of Inorganic and Bioinorganic Chemistry: http://www.wileyonlinelibrary.com/ref/eibc

Author : Xiaoqin Zou
Publisher : John Wiley & Sons
Page : 472 pages
File Size : 34,90 MB
Release : 2019-05-29
Category : Technology & Engineering
ISBN : 3527344098

GET BOOK

A guide to membrane separation based on a variety of porous materials with promising separation applications Microporous Materials for Separation Membranes offers an in-depth guide that explores microporous materials? potential for membrane applications. The authors?two experts on the topic?examine a wide range of porous materials that have application potential including: microporous silica, porous carbons, zeolites, metal-organic frameworks (MOFs), and porous organic frameworks (POFs). Comprehensive in scope, the book covers a broad range of topics on membrane separations such as: hydrogen recovery, carbon dioxide capture, air purification, hydrocarbon separation, pervaporation, and water treatment. In addition, this up-to-date resource explores the most recent materials for preparing microporous membranes and explores the most promising applications for industrial use. This important book: -Examines the use of microporous materials as membranes to perform with different gases and liquids -Offers an overview of the basic knowledge of membrane separation and an intense examination of separations -Describes the state-of-the-art of membrane separation with porous materials -Highlights the most promising applications of industrial interest Written for scientists working in the fields of membranes, gas and liquid, Microporous Materials for Separation Membranes offers a valuable guide to the potential of microporous materials for membrane applications.

Author : Ahmad Fauzi Ismail
Publisher : Springer
Page : 340 pages
File Size : 30,62 MB
Release : 2015-04-28
Category : Science
ISBN : 3319010956

GET BOOK

This book describes the tremendous progress that has been made in the development of gas separation membranes based both on inorganic and polymeric materials. Materials discussed include polymer inclusion membranes (PIMs), metal organic frameworks (MOFs), carbon based materials, zeolites, as well as other materials, and mixed matrix membranes (MMMs) in which the above novel materials are incorporated. This broad survey of gas membranes covers material, theory, modeling, preparation, characterization (for example, by AFM, IR, XRD, ESR, Positron annihilation spectroscopy), tailoring of membranes, membrane module and system design, and applications. The book is concluded with some perspectives about the future direction of the field.

Author : Angelo Basile
Publisher : Elsevier
Page : 420 pages
File Size : 47,75 MB
Release : 2017-08-11
Category : Technology & Engineering
ISBN : 0444638679

GET BOOK

Current Trends and Future Developments on (Bio-) Membranes: Silica Membranes: Preparation, Modelling, Application, and Commercialization discusses one of the most promising inorganic membranes, namely silica membranes, and their different applications. In the field of membrane separation technology, silica membranes play a key role in the future of the chemical industry as one of the most promising alternatives for separations at high temperatures and aggressive media. This book details the latest research findings, along with the potential industrial applications of an area that has seen growing research activity on various type of membranes due to the necessity of gas separation and water treatment processes. Many industrial companies and academic centers will find immense interest in learning about the best strategies for carrying out these processes. Reviews available methods for the characterization, preparation, and applications of silica membranes Includes new and emerging modeling methods Discusses silica membrane applications for hydrogen production and applications in CO2 capturing, water treatment, and pervaporation

Author : Lisa Klein
Publisher : Springer Nature
Page : 3755 pages
File Size : 49,88 MB
Release : 2018-05-31
Category : Technology & Engineering
ISBN : 3319321013

GET BOOK

This completely updated and expanded second edition stands as a comprehensive knowledgebase on both the fundamentals and applications of this important materials processing method. The diverse, international team of contributing authors of this reference clarify in extensive detail properties and applications of sol-gel science and technology as it pertains to the production of substances, active and non-active, including optical, electronic, chemical, sensor, bio- and structural materials. Essential to a wide range of manufacturing industries, the compilation divides into the three complementary sections: Sol-Gel Processing, devoted to general aspects of processing and recently developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, and photocatalysts; Characterization of Sol-Gel Materials and Products, presenting contributions that highlight the notion that useful materials are only produced when characterization is tied to processing, such as determination of structure by NMR, in-situ characterization of the sol-gel reaction process, determination of microstructure of oxide gels, characterization of porous structure of gels by the surface measurements, and characterization of organic-inorganic hybrid; and Applications of Sol-Gel Technology, covering applications such as the sol-gel method used in processing of bulk silica glasses, bulk porous gels prepared by sol-gel method, application of sol-gel method to fabrication of glass and ceramic fibers, reflective and antireflective coating films, application of sol-gel method to formation of photocatalytic coating films, and application of sol-gel method to bioactive coating films. The comprehensive scope and integrated treatment of topics make this reference volume ideal for R&D scientists and engineers across a wide range of disciplines and professional interests.