[PDF] Roofing Ready Reckoner eBook

Author : C. N. Mindham
Publisher : John Wiley & Sons
Page : 264 pages
File Size : 14,15 MB
Release : 2016-03-07
Category : Technology & Engineering
ISBN : 1119077656

GET BOOK

Goss’s Roofing Ready Reckoner provides cutting angle and lengths for traditional ‘cut’ roofs and design tables for timber sizing, based on BS5268 ‘Structural use of timber’ and now including a comparison of timber sizes using Eurocode 5 ‘Design of Timber Structures’. Additional information is provided on wall plate and gable strapping, wind bracing, truss clips and other roofing metalwork, plus information on tools, equipment and health and safety matters. Detailed drawings for tiling, slating and other roof coverings are included, with fixing requirements revised to BS 5534:2014. Information on lead substitutes and roofing putties is also provided. Design of warm and cold roofs is fully covered, including ventilation and insulation requirements. The fifth edition also includes new chapters on engineered timber roofing components, solar panel fixing and outbuilding roofs.

Author : Chris N. Mindham
Publisher : John Wiley & Sons
Page : 195 pages
File Size : 46,60 MB
Release : 2008-04-30
Category : Technology & Engineering
ISBN : 0470697989

GET BOOK

Goss's Roofing Ready Reckoner provides rafter dimensions for timberroofs of any span and pitch. Additional information is provided onwall plate and gable strapping, wind bracing, truss clips and otherroofing metalwork, and tools and equipment. This new edition includes roof timber member design tables,information on warm and cold roofs, their ventilation andinsulation, plus detailed drawings for tiling, slating and otherroof coverings. Also of interest Roof Construction and Loft Conversion Fourth Edition C. N. Mindham 978 14051 3963 2 Cover illustration by kind permission of David Wilson Homes Cover design by Andy Meaden

Author : C. N. Mindham
Publisher : John Wiley & Sons
Page : 277 pages
File Size : 33,27 MB
Release : 2016-05-16
Category : Technology & Engineering
ISBN : 1119077648

GET BOOK

Goss’s Roofing Ready Reckoner provides cutting angle and lengths for traditional ‘cut’ roofs and design tables for timber sizing, based on BS5268 ‘Structural use of timber’ and now including a comparison of timber sizes using Eurocode 5 ‘Design of Timber Structures’. Additional information is provided on wall plate and gable strapping, wind bracing, truss clips and other roofing metalwork, plus information on tools, equipment and health and safety matters. Detailed drawings for tiling, slating and other roof coverings are included, with fixing requirements revised to BS 5534:2014. Information on lead substitutes and roofing putties is also provided. Design of warm and cold roofs is fully covered, including ventilation and insulation requirements. The fifth edition also includes new chapters on engineered timber roofing components, solar panel fixing and outbuilding roofs.

Author : C. N. Mindham
Publisher : John Wiley & Sons
Page : 256 pages
File Size : 32,1 MB
Release : 2008-04-15
Category : Technology & Engineering
ISBN : 1405173262

GET BOOK

Full of detailed construction drawings, this book covers cut roofs,bolted truss roofs, trussed rafter roofs, trimmed openings andventilation. A major section deals with loft to attic room conversions, givingguidance on planning procedures, as well as dealing with structuralmatters and specifying conversion work. The Fourth Edition features a new chapter covering the growingnumber of engineered timber components available in the housebuilding industry. The use of I beams and roof cassettes isdetailed for roof and room-in-the-roof construction. The text hasbeen fully updated to current standards and features additionaldetailed construction drawings. The chapters on attic conversionand construction have been expanded and a new attic conversiondecision flow chart added. The book will prove invaluable to architects, house builders, roofcarpenters, building control officers, trussed rafter manufacturersand students of building technology. The Author C.N. Mindham BSc has had a wide experience in the constructionindustry. After three years with TRADA as Eastern Regional Officer,he spent 11 years developing a timber engineering business tobecome one of the country's largest producers of trussedrafters. He became Managing Director of a company designing andmanufacturing trussed rafters, joinery and prefabricated timberbuildings, a post he held for eight years. Subsequently he startedhis own consultancy for the timber industry which has led him tohis current position as Managing Director for a joinery andengineering company. Also of interest Loft Conversions John Coutts 1-4051-3043-1 9781-4051-3043-1 The Building Regulations Explained and Illustrated Twelfth Edition M.J. Billington, M.W. Simons and J.R. Waters 0-6320-5837-4 9780-6320-5837-4 Cover design by Garth Stewart Cover illustrations courtesy of VELUX and Mr C. Lovell,Wellingborough, Northamptonshire.

Author : Les Goring
Publisher : Routledge
Page : 282 pages
File Size : 14,27 MB
Release : 2010
Category : Technology & Engineering
ISBN : 1856177688

GET BOOK

A detailed and highly illustrated, practical guide to the techniques in first and second-fixing carpentry in domestic construction. The book includes step-by-step illustrations and text to provide the reader with a complete picture of the sequence of work required to carry out each task.

Author : Kevin Taylor
Publisher : Crowood
Page : 310 pages
File Size : 22,54 MB
Release : 2012-10-01
Category : Technology & Engineering
ISBN : 1847974716

GET BOOK

If you have never fixed a roof tile or slate before but have wondered how to go about repairing or replacing them, then this is the book for you. Many of the technical books about roof tiling and slating are rather vague and conveniently ignore some of the trickier problems and how they can be resolved. In Roof Tiling and Slating, the author rejects this cautious approach. Kevin Taylor uses both his extensive knowledge of the trade and his ability to explain the subject in easily understandable terms, to demonstrate how to carry out the work safely to a high standard, using tried and tested methods. Topics covered: considers the various types of tiles, slates and roofing materials on the market and their uses, how to estimate the required quantities, and where to buy them; discusses how to check and assess a roof and how to identify and rectify problems; describes how to efficiently 'set out' roofs from small, simple jobs to larger and more complicated projects, thus making the work quicker, simpler and neater; examines the correct and the incorrect ways of installing background materials such as underlay, battens and valley liners; explains how to install interlocking tiles, plain tiles, and artificial and natural slates; covers both modern and traditional methods and skills, including cutting materials by hand without the assistance of power tools; provides invaluable guidance on repairs and maintenance issues, and highlights common mistakes and how they can be avoided.

Author : R. Goss
Publisher : John Wiley & Sons
Page : 192 pages
File Size : 19,81 MB
Release : 2008-04-15
Category : Technology & Engineering
ISBN : 0470680318

GET BOOK

Now fully revised, the third edition of this renowned book by Ralph Goss has been made even more valuable with the addition of many new illustrations, and takes into account not only traditional cut roof construction but also modern trussed rafter roof assembly methods. Revised by C.N. Mindham, author of Roof Construction and Loft Conversion, this new edition contains many new drawings of constructional details for which his own book is much acclaimed. Information is now given on wall plate and gable end strapping, wind bracing, truss clips and other roofing metalwork, as well as on the modern tools and instruments necessary to carry out the construction work. Proven as a book for professionals, the book is now equally suitable for the keen DIY enthusiast as well as the professional. All information is given in both metric and imperial units.