[PDF] Report On Forming Of Titanium And Titanium Alloys eBook

Author : D. E. Strohecker
Publisher :
Page : 84 pages
File Size : 12,19 MB
Release : 1967
Category : Titanium
ISBN :

GET BOOK

This report represents a portion of the information contained in the March, 1967, revised edition of the 'Aircraft Designer's Handbook for Titanium and Titanium Alloys' which was prepared by the Defense Metals Information Center under the joint sponsorship of the U.S. Air Force Research and Technology Division, and the Federal Aviation Agency. The important techniques discussed include; (1) brake forming, (2) stretch forming, (3) deep drawing, (4) trapped-rubber forming, (5) tube bulging, (6) bending, (7) drop-hammer forming, (8) roll forming, (9) roll bending, (10) spinning, (11) shear forming, (12) dimpling, (13) joggling, and (14) hot sizing. Auxiliary metalworking operations, preparation for forming, blank heating methods, lubricants for forming and tooling materials are discussed. Other data available in the open literature have been summarized and referenced to present a comprehensive picture on the state of the art of these fabrication methods as related to titanium and its alloys. (Author).

Author : Christoph Leyens
Publisher : John Wiley & Sons
Page : 532 pages
File Size : 22,22 MB
Release : 2006-03-06
Category : Technology & Engineering
ISBN : 3527605207

GET BOOK

This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.

Author : Ma Qian
Publisher : Butterworth-Heinemann
Page : 649 pages
File Size : 39,97 MB
Release : 2015-02-10
Category : Technology & Engineering
ISBN : 0128009101

GET BOOK

Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys

Author : J. Paulo Davim
Publisher : Springer
Page : 154 pages
File Size : 30,79 MB
Release : 2014-07-05
Category : Technology & Engineering
ISBN : 3662439026

GET BOOK

This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

Author : Maciej Motyka
Publisher : BoD – Books on Demand
Page : 156 pages
File Size : 11,40 MB
Release : 2019-11-27
Category : Technology & Engineering
ISBN : 183962552X

GET BOOK

Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Author : Jan Sieniawski
Publisher : BoD – Books on Demand
Page : 160 pages
File Size : 26,86 MB
Release : 2013-05-15
Category : Technology & Engineering
ISBN : 9535111108

GET BOOK

The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.