[PDF] Plasticity Failure And Fatigue In Structural Materials From Macro To Nano eBook
Plasticity Failure And Fatigue In Structural Materials From Macro To Nano Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of Plasticity Failure And Fatigue In Structural Materials From Macro To Nano book. This book definitely worth reading, it is an incredibly well-written.
This book contains papers from the symposium held to honor Professor Hael Mughrabi, who devoted 40 years of research to the mechanical behavior of materials. In particular, Professor Mughrabi performed fundamental studies on the mechanisms of plastic deformation and fatigue based on dislocation mechanics. Readers of this book will find research development in deformation and fatigue including very high cycle fatigue of advanced engineering materials. Particular emphasis is given to mechanical properties of nanomaterials, and to the behavior and processes at the nanoscale in engineering materials. Specific subjects include deformation and fracture mechanisms; single crystals; mathematical modeling; cyclic, static and dynamic loading; and damage evolution.
This book contains papers from the symposium held to honor Professor Hael Mughrabi, who devoted 40 years of research to the mechanical behavior of materials. In particular, Professor Mughrabi performed fundamental studies on the mechanisms of plastic deformation and fatigue based on dislocation mechanics. Readers of this book will find research development in deformation and fatigue including very high cycle fatigue of advanced engineering materials. Particular emphasis is given to mechanical properties of nanomaterials, and to the behavior and processes at the nanoscale in engineering materials. Specific subjects include deformation and fracture mechanisms; single crystals; mathematical modeling; cyclic, static and dynamic loading; and damage evolution.
The choice of a material for a certain application is made taking into account its properties. If, for example one would like to produce a table, a hard material is needed to guarantee the stability of the product, but the material should not be too hard so that manufacturing is still as easy as possible - in this simple example wood might be the material of choice. When coming to more advanced applications the required properties are becoming more complex and the manufacturer`s desire is to tailor the properties of the material to fit the needs. To let this dream come true, insights into the microstructure of materials is crucial to finally control the properties of the materials because the microstructure determines its properties. Written by leading scientists in the field of microstructural design of engineering materials, this book focuses on the evolution and behavior of granular microstructures of various advanced materials during plastic deformation and treatment at elevated temperatures. These topics provide essential background and practical information for materials scientists, metallurgists and solid state physicists.
Due to increasing demands on sustainability exerted by end-costumers and policy makers, heavyvehicle manufacturers are urged to increase the engine efficiency in order to reduce the exhaust gas emission. However, increasing the efficiency is also associated with an elevated fatigue rate of the materials constituting the engine parts, which consequently reduces the engine service life. The aim of the present thesis is therefore to confront the expected increase by studying the fatigue behaviour and damage mechanisms of the materials typically employed in heavy-vehicle diesel engines. With this knowledge, this work seeks to guide the development of new heavy-vehicle engine materials, as well as to develop improved life estimation methods designated to assist the mechanical design of durable heavy-vehicle engines. In essence, a large set of thermo-mechanical fatigue (TMF) and combined thermomechanical and high-cycle fatigue (TMF-HCF) tests is conducted at engine load conditions on laboratory specimens of lamellar, compacted and spheroidal graphite iron. In this way, the fatigue performance and associated damage mechanisms are investigated. In particular, a new fatigue property is identified, the TMF-HCF threshold, which quantifies how resistant a material is to superimposed high-cycle fatigue. The damage mechanism at low temperatures (?500°C) is confirmed to consist of the initiation, propagation and coalescence of numerous microcracks. Based on this, a successful fatigue life estimation model is formulated, allowing accurate estimations of TMF and TMF-HCF tests on smooth specimens, and TMF tests on notched specimens. In the latter case, the microcrack growth behaviour in non-uniform cyclic stress fields and its implications for life estimation are clarified. At elevated temperatures (?500°C), surface oxidation is shown to govern the fatigue performance of cast iron grades intended for exhaust manifolds. It is observed that oxide intrusions are induced, from which surface fatigue cracks are initiated. Consequently, an optimal material at these conditions should have a low oxide growth rate and few casting defects at the surface, as these factors are found to stimulate the growth of intrusion.
Copper has been used for thousands of years. In the centuries, both handicraft and industry have taken advantage of its easy castability and remarkable ductility combined with good mechanical and corrosion resistance. Although its mechanical properties are now well known, the simple f.c.c. structure still makes copper a model material for basic studies of deformation and damage mechanism in metals. On the other hand, its increasing use in many industrial sectors stimulates the development of high-performance and high-efficiency copper-based alloys. After an introduction to classification and casting, this book presents modern techniques and trends in processing copper alloys, such as the developing of lead-free alloys and the role of severe plastic deformation in improving its tensile and fatigue strength. Finally, in a specific section, archaeometallurgy techniques are applied to ancient copper alloys. The book is addressed to engineering professionals, manufacturers and materials scientists.
Size Effects in Plasticity: From Macro to Nano provides concise explanations of all available methods in this area, from atomistic simulation, to non-local continuum models to capture size effects. It then compares their applicability to a wide range of research scenarios. This essential guide addresses basic principles, numerical issues and computation, applications and provides code which readers can use in their own modeling projects. Researchers in the fields of computational mechanics, materials science and engineering will find this to be an ideal resource when they address the size effects observed in deformation mechanisms and strengths of various materials. Provides a comprehensive reference on the field of size effects and a review of mechanics of materials research in all scales Explains all major methods of size effects simulation, including non-local continuum models, non-local crystal plasticity, discrete dislocation methods and molecular dynamics Includes source codes that readers can use in their own projects
Volume is indexed by Thomson Reuters CPCI-S (WoS). This compilation of selected papers has, as its principal objective, the discussion of state-of-the-art technologies and recent developments in the macro-, meso-, micro- and nano-mechanics of materials and structures.
The primary objective of the Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA) is to provide a free forum for exchanging ideas and introducing the latest research findings in the field of engineering plasticity. This conference is unique among the related conferences in that it provides a forum for all fields of plasticity so that multi-disciplinary research works are encouraged. This proceedings volume consists of papers presented at AEPA2008, and covers the following categories in all fields of engineering plasticity: constitutive modeling; damage, fracture, fatigue and failure; dynamic loading and crash dynamics; engineering applications and case studies; experimental and numerical techniques; molecular dynamics; nano, meso, micro and crystal plasticity; phase transformations; plastic instability and strain localization; plasticity in advanced materials; plasticity in materials processing technology; plasticity in tribology; porous, cellular and composite materials; structural plasticity; superplasticity; and time-dependent deformation. Ranging from nanoscale to macroscale applications of engineering plasticity, this book touches upon fields as diverse as mechanical engineering, materials science, physics, chemistry and civil engineering.
This book presents studies on the plasticity, failure, and damage behavior of materials and structures under monotonic and cyclic loads. Featuring contributions by leading authors from around the globe, it focuses on the description of new effects observed in experiments, such as damage under cyclic loading. It also proposes various simulation models based on different approaches and compares them with tests, taking scaling aspects into account.