[PDF] Performance Analysis Of Continuous Material Flow Systems eBook

Author : Stefan Helber
Publisher : Springer Science & Business Media
Page : 290 pages
File Size : 26,80 MB
Release : 2012-12-06
Category : Mathematics
ISBN : 364295863X

GET BOOK

Flow line design is one of the major tasks in production management. The decision to install a set of machines and buffers is often highly irreversible. It determines both cost and revenue to a large extent. In order to assess the economic impact of any possible flow line design, production rates and inventory levels have to be estimated. These performance measures depend on the allocation of buffers whenever the flow of material is occasionally disrupted, for example due to machine failures or quality problems. The book describes analytical methods that can be used to evaluate flow lines much faster than with simulation techniques. Based on these fast analytical techniques, it is possible to determine a flow line design that maximizes the net present value of the flow line investment. The flow of material through the line may be non-linear, for example due to assembly operations or quality inspections.

Author : Duc T. Pham
Publisher : Elsevier
Page : 691 pages
File Size : 30,45 MB
Release : 2005-12-09
Category : Technology & Engineering
ISBN : 0080462510

GET BOOK

The 2005 Virtual International Conference on IPROMS took place on the Internet between 4 and 15 July 2005. IPROMS 2005 was an outstanding success. During the Conference, some 4168 registered delegates and guests from 71 countries participated in the Conference, making it a truly global phenomenon. This book contains the Proceedings of IPROMS 2005. The 107 peer-reviewed technical papers presented at the Conference have been grouped into twelve sections, the last three featuring contributions selected for IPROMS 2005 by Special Sessions chairmen: - Collaborative and Responsive Manufacturing Systems- Concurrent Engineering- E-manufacturing, E-business and Virtual Enterprises- Intelligent Automation Systems- Intelligent Decision Support Systems- Intelligent Design Systems- Intelligent Planning and Scheduling Systems- Mechatronics- Reconfigurable Manufacturing Systems- Tangible Acoustic Interfaces (Tai Chi)- Innovative Production Machines and Systems- Intelligent and Competitive Manufacturing Engineering

Author : Stanley B. Gershwin
Publisher : Springer Science & Business Media
Page : 443 pages
File Size : 16,26 MB
Release : 2012-12-06
Category : Business & Economics
ISBN : 1461510198

GET BOOK

Analysis and Modeling of Manufacturing Systems is a set of papers on some of the newest research and applications of mathematical and computational techniques to manufacturing systems and supply chains. These papers deal with fundamental questions (how to predict factory performance: how to operate production systems) and explicitly treat the stochastic nature of failures, operation times, demand, and other important events. Analysis and Modeling of Manufacturing Systems will be of interest to readers with a strong background in operations research, including researchers and mathematically sophisticated practitioners.

Author : Julia Mindlina
Publisher : BoD – Books on Demand
Page : 242 pages
File Size : 11,89 MB
Release : 2019-03-14
Category : Business & Economics
ISBN : 374942117X

GET BOOK

In order to improve the performance of production systems, companies consider the optimization of the flow line configuration. However, the material supply of the flow line exerts a strong influence on the output of the production system since material shortages impede the flow of workpieces through the flow line. Simultaneously, the configuration of the flow line determines the demand for material. Consequently, the mutual interdependence between the material supply and the flow line has to be considered in order to balance a sufficient material supply of the flow line avoiding material shortages as well as excessive material inventory and handling effort. We provide integrated approaches for the evaluation and optimization of stochastic flow lines with limited material supply. Thereby, we make use of several evaluation methods as Markov chain approaches, aggregation and decomposition approaches as well as linear programming. Further, we model open and closed queuing networks in continuous and discrete time. Hence, we present exact and approximate approaches that allow us to study the effects in several stochastic production systems with limited material supply.

Author : Susmita Bandyopadhyay
Publisher : CRC Press
Page : 380 pages
File Size : 13,23 MB
Release : 2014-06-25
Category : Mathematics
ISBN : 1466596392

GET BOOK

When it comes to discovering glitches inherent in complex systems—be it a railway or banking, chemical production, medical, manufacturing, or inventory control system—developing a simulation of a system can identify problems with less time, effort, and disruption than it would take to employ the original. Advantageous to both academic and industrial practitioners, Discrete and Continuous Simulation: Theory and Practice offers a detailed view of simulation that is useful in several fields of study. This text concentrates on the simulation of complex systems, covering the basics in detail and exploring the diverse aspects, including continuous event simulation and optimization with simulation. It explores the connections between discrete and continuous simulation, and applies a specific focus to simulation in the supply chain and manufacturing field. It discusses the Monte Carlo simulation, which is the basic and traditional form of simulation. It addresses future trends and technologies for simulation, with particular emphasis given to .NET technologies and cloud computing, and proposes various simulation optimization algorithms from existing literature. Includes chapters on input modeling and hybrid simulation Introduces general probability theory Contains a chapter on Microsoft® ExcelTM and MATLAB®/Simulink® Discusses various probability distributions required for simulation Describes essential random number generators Discrete and Continuous Simulation: Theory and Practice defines the simulation of complex systems. This text benefits academic researchers in industrial/manufacturing/systems engineering, computer sciences, operations research, and researchers in transportation, operations management, healthcare systems, and human–machine systems.

Author : George Liberopoulos
Publisher : Springer Science & Business Media
Page : 363 pages
File Size : 24,78 MB
Release : 2005-12-12
Category : Business & Economics
ISBN : 3540290575

GET BOOK

Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.