[PDF] Pem Water Electrolysis eBook

Author : Dmitri Bessarabov
Publisher : Academic Press
Page : 178 pages
File Size : 33,94 MB
Release : 2018-07-23
Category : Technology & Engineering
ISBN : 0128111461

GET BOOK

Hydrogen Energy and Fuel Cell Primers is a series of concise books that present those coming into this broad and multidisciplinary field the most recent advances in each of its particular topics. Its volumes bring together information that has thus far been scattered in many different sources under one single title, which makes them a useful reference for industry professionals, researchers and graduate students, especially those starting in a new topic of research. These volumes, PEM Water Electrolysis vol 1 and 2, allows these readers to identify the technology gaps for the development of commercially viable PEM electrolysis systems for energy applications. This primer examines the fundamentals of PEM electrolysis and selected research topics that are currently subject of attention by academic and industry community, such as gas cross-over and AST protocols. This lays the foundation for the exploration of the current industrial trends for PEM electrolysis, such as power to gas application, are discussed, with strong focus on the current trends in the application of PEM electrolysis associated with energy storage. These include durability aspects of PEM electrolysis systems and components, accelerated stress test protocols, manufacturing aspects of large-scale electrolyzers and components, gas crossover problems in PEM electrolyzer safety, and challenges associated with high-current density operation of PEM electrolyzers. A technology development matrix for systems and components requirements will also be covered, as well as unconventional PEM water electrolysis systems, such as ozone generators Presents the fundamentals and most current knowledge in proton exchange membrane water electrolyzers Explores the technology gaps and challenges for commercial deployment of PEM water electrolysis technologies Includes unconventional systems, such as ozone generators Brings together information from many different sources under one single title, making it a useful reference for industry professionals, researchers and graduate students alike

Author : Bent Sørensen
Publisher : Academic Press
Page : 507 pages
File Size : 12,73 MB
Release : 2011-11-14
Category : Science
ISBN : 0123877091

GET BOOK

A hydrogen economy, in which this one gas provides the source of all energy needs, is often touted as the long-term solution to the environmental and security problems associated with fossil fuels. However, before hydrogen can be used as fuel on a global scale we must establish cost effective means of producing, storing, and distributing the gas, develop cost efficient technologies for converting hydrogen to electricity (e.g. fuel cells), and creating the infrastructure to support all this. Sorensen is the only text available that provides up to date coverage of all these issues at a level appropriate for the technical reader. The book not only describes the "how" and "where" aspects of hydrogen fuels cells usage, but also the obstacles and benefits of its use, as well as the social implications (both economically and environmental). Written by a world-renowned researcher in energy systems, this thoroughly illustrated and cross-referenced book is an excellent reference for researchers, professionals and students in the field of renewable energy. Updated sections on PEM fuel cells, Molten carbonate cells, Solid Oxide cells and Biofuel cells Updated material to reflect the growing commercial acceptance of stationary and portable fuel cell systems, while also recognizing the ongoing research in automotive fuel cell systems A new example of a regional system based on renewable energy sources reflects the growing international attention to uses of renewable energy as part of the energy grid Examples of life cycle analysis of environmental and social impacts

Author : Dmitri Bessarabov
Publisher : CRC Press
Page : 401 pages
File Size : 39,28 MB
Release : 2016-02-03
Category : Science
ISBN : 1482252325

GET BOOK

An ever-increasing dependence on green energy has brought on a renewed interest in polymer electrolyte membrane (PEM) electrolysis as a viable solution for hydrogen production. While alkaline water electrolyzers have been used in the production of hydrogen for many years, there are certain advantages associated with PEM electrolysis and its relevan

Author : Agata Godula-Jopek
Publisher : John Wiley & Sons
Page : 436 pages
File Size : 33,84 MB
Release : 2015-06-29
Category : Science
ISBN : 3527333428

GET BOOK

Covering the various aspects of this fast-evolving field, this comprehensive book includes the fundamentals and a comparison of current applications, while focusing on the latest, novel achievements and future directions. The introductory chapters explore the thermodynamic and electrochemical processes to better understand how electrolysis cells work, and how these can be combined to build large electrolysis modules. The book then goes on to discuss the electrolysis process and the characteristics, advantages, drawbacks, and challenges of the main existing electrolysis technologies. Current manufacturers and the main features of commercially available electrolyzers are extensively reviewed. The final chapters then present the possible configurations for integrating water electrolysis units with renewable energy sources in both autonomous and grid-connected systems, and comment on some relevant demonstration projects. Written by an internationally renowned team from academia and industry, the result is an invaluable review of the field and a discussion of known limitations and future perspectives.

Author : Felix N. Büchi
Publisher : Springer Science & Business Media
Page : 489 pages
File Size : 40,38 MB
Release : 2009-02-08
Category : Science
ISBN : 038785536X

GET BOOK

This book covers a significant number of R&D projects, performed mostly after 2000, devoted to the understanding and prevention of performance degradation processes in polymer electrolyte fuel cells (PEFCs). The extent and severity of performance degradation processes in PEFCs were recognized rather gradually. Indeed, the recognition overlapped with a significant number of industrial dem- strations of fuel cell powered vehicles, which would suggest a degree of technology maturity beyond the resaolution of fundamental failure mechanisms. An intriguing question, therefore, is why has there been this apparent delay in addressing fun- mental performance stability requirements. The apparent answer is that testing of the power system under fully realistic operation conditions was one prerequisite for revealing the nature and extent of some key modes of PEFC stack failure. Such modes of failure were not exposed to a similar degree, or not at all, in earlier tests of PEFC stacks which were not performed under fully relevant conditions, parti- larly such tests which did not include multiple on–off and/or high power–low power cycles typical for transportation and mobile power applications of PEFCs. Long-term testing of PEFCs reported in the early 1990s by both Los Alamos National Laboratory and Ballard Power was performed under conditions of c- stant cell voltage, typically near the maximum power point of the PEFC.

Author : Detlef Stolten
Publisher : John Wiley & Sons
Page : 882 pages
File Size : 23,12 MB
Release : 2013-05-13
Category : Science
ISBN : 352767389X

GET BOOK

In this ready reference, top academic researchers, industry players and government officers join forces to develop commercial concepts for the transition from current nuclear or fossil fuel-based energy to renewable energy systems within a limited time span. They take into account the latest science and technology, including an analysis of the feasibility and impact on the environment, economy and society. In so doing, they discuss such complex topics as electrical and gas grids, fossil power plants and energy storage technologies. The contributions also include robust, conceivable and breakthrough technologies that will be viable and implementable by 2020.

Author : Tom Smolinka
Publisher : Elsevier
Page : 512 pages
File Size : 41,73 MB
Release : 2021-10-25
Category : Technology & Engineering
ISBN : 0128194251

GET BOOK

Electrochemical Power Sources: Fundamentals, Systems, and Applications: Hydrogen Production by Water Electrolysis offers a comprehensive overview about different hydrogen production technologies, including their technical features, development stage, recent advances, and technical and economic issues of system integration. Allied processes such as regenerative fuel cells and sea water electrolysis are also covered. For many years hydrogen production by water electrolysis was of minor importance, but research and development in the field has increased significantly in recent years, and a comprehensive overview is missing. This book bridges this gap and provides a general reference to the topic. Hydrogen production by water electrolysis is the main technology to integrate high shares of electricity from renewable energy sources and balance out the supply and demand match in the energy system. Different electrochemical approaches exist to produce hydrogen from RES (Renewable Energy Sources). Covers the fundamentals of hydrogen production by water electrolysis Reviews all relevant technologies comprehensively Outlines important technical and economic issues of system integration Includes commercial examples and demonstrates electrolyzer projects

Author : Detlef Stolten
Publisher : John Wiley & Sons
Page : 1185 pages
File Size : 28,83 MB
Release : 2016-03-21
Category : Science
ISBN : 3527332383

GET BOOK

Authored by 50 top academic, government and industry researchers, this handbook explores mature, evolving technologies for a clean, economically viable alternative to non-renewable energy. In so doing, it also discusses such broader topics as the environmental impact, education, safety and regulatory developments. The text is all-encompassing, covering a wide range that includes hydrogen as an energy carrier, hydrogen for storage of renewable energy, and incorporating hydrogen technologies into existing technologies.

Author : Mehmet Sankir
Publisher : John Wiley & Sons
Page : 653 pages
File Size : 40,8 MB
Release : 2017-03-20
Category : Science
ISBN : 1119283655

GET BOOK

Provides a comprehensive practical review of the new technologies used to obtain hydrogen more efficiently via catalytic, electrochemical, bio- and photohydrogen production. Hydrogen has been gaining more attention in both transportation and stationary power applications. Fuel cell-powered cars are on the roads and the automotive industry is demanding feasible and efficient technologies to produce hydrogen. The principles and methods described herein lead to reasonable mitigation of the great majority of problems associated with hydrogen production technologies. The chapters in this book are written by distinguished authors who have extensive experience in their fields, and readers will have a chance to compare the fundamental production techniques and learn about the pros and cons of these technologies. The book is organized into three parts. Part I shows the catalytic and electrochemical principles involved in hydrogen production technologies. Part II addresses hydrogen production from electrochemically active bacteria (EAB) by decomposing organic compound into hydrogen in microbial electrolysis cells (MECs). The final part of the book is concerned with photohydrogen generation. Recent developments in the area of semiconductor-based nanomaterials, specifically semiconductor oxides, nitrides and metal free semiconductor-based nanomaterials for photocatalytic hydrogen production are extensively discussed.

Author : Albert Tarancón
Publisher : John Wiley & Sons
Page : 400 pages
File Size : 32,34 MB
Release : 2021-03-03
Category : Technology & Engineering
ISBN : 1119560764

GET BOOK

3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.