[PDF] Operations And Basic Processes In Ironmaking eBook

Author : José Ignacio Verdeja González
Publisher : Springer Nature
Page : 323 pages
File Size : 31,97 MB
Release : 2020-08-18
Category : Technology & Engineering
ISBN : 3030546063

GET BOOK

This textbook explores the production of pig iron, covering the first part of the steel production process, known as ironmaking. Divided into seven chapters, it discusses the following topics: raw materials for steel production (coking coal, iron ore, slag-forming agents and fluxes, scrap, ferroalloys and pre-reduced materials), the sintering process (used to prepare the burden for the blast furnace), the pelletizing process (used to agglomerate the fine iron ores), the production of coke (the main reductant in the ironmaking process), the production of iron by reduction with gas (an alternative to the blast furnace) and the production of pig iron in the blast furnace (which is used in more than 65% of steel production worldwide). Specially conceived for graduate and undergraduate courses, this book is based on more than 30 years of teaching experience in courses for undergraduates, graduates (master and Ph.D.) and industry professionals (technicians). It explores the recent trends in the iron- and steelmaking process (which might used in the future production of steel), and features 55 worked exercises and real-world problems to complement of the theoretical sections of the text.

Author : Luis Felipe Verdeja González
Publisher : Springer Nature
Page : 516 pages
File Size : 41,47 MB
Release : 2021-03-24
Category : Technology & Engineering
ISBN : 3030680002

GET BOOK

This book describes the operations and industrial processes related to the production of steel. The chapters cover the second part of the iron and steelmaking process, called steelmaking, presenting the stages of the process until obtaining the finished steel product in different formats for distinct applications. This book reports significant operating variables of the processes and basic operations of the steelmaking. The chapters contain numerous solved exercises conceptually supported on the thermodynamic and kinetic fundamentals of the production of steel from the pig iron in the Basic Oxygen Furnace (BOF) and the production of steel and ferroalloys in Electric Arc Furnaces (EAF). The thermal and mechanic fundamentals of the hot rolling operations and the mechanical fundamentals of the cold rolling, forming, and wire drawing to obtain different steel products are also reported. The book summarizes the strengths and uncertainties of steel as a structural material.

Author : Sujay Kumar Dutta
Publisher : Springer Nature
Page : 644 pages
File Size : 42,68 MB
Release : 2020-03-02
Category : Technology & Engineering
ISBN : 9811524378

GET BOOK

This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.

Author : Pasquale Cavaliere
Publisher : Springer
Page : 461 pages
File Size : 11,20 MB
Release : 2016-09-02
Category : Technology & Engineering
ISBN : 3319395297

GET BOOK

This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.

Author : M. Geerdes
Publisher : IOS Press
Page : 276 pages
File Size : 14,72 MB
Release : 2020-11-04
Category : Technology & Engineering
ISBN : 1643681230

GET BOOK

Modern Blast Furnace Ironmaking – An Introduction (Fourth Edition, 2020) describes the principles of the blast furnace process. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background of the blast furnace process is clarified. The book focuses on the control of the process with respect to thermal control, gas flow control and casthouse operation. In this book, all essential process details are described and a special focus is on cost optimization by low coke rates and on management of the process in case of disturbances and upsets. The optimization of the blast furnace is not only based on “best practice transfer”, but also requires conceptual understanding why a measure works in some cases and not in other cases. In other words, operational improvement is not only based on know–how, but as well on know–why. This publication can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management.

Author : Maarten Geerdes
Publisher : IOS Press
Page : 176 pages
File Size : 29,94 MB
Release : 2009
Category : Technology & Engineering
ISBN : 160750040X

GET BOOK

"This publication was and can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management. The latter will benefit to solve operational problems and process optimization issues." --Book Jacket.

Author : Sujay Kumar Dutta | Rameshwar Sah
Publisher : S. Chand Publishing
Page : 136 pages
File Size : 31,85 MB
Release :
Category : Technology & Engineering
ISBN : 8121940583

GET BOOK

This book has been prepared primarily for use by Students studying Ferrous Metallurgy (i.e., Iron and Steelmaking) at UG and PG level of Metallurgical and Materials Engineering, Research workers engaged in obtaining fundamental information in this field, and for Process Metallurgists to understand the processes in general and Sponge Iron Producers in particular. •; It also helps the practicing engineers who wish to apply the theoretical knowledge to the process they are operating. •;The book may very well be introduced as a Textbook for Elective subject in Third/Fourth year of UG programme in Metallurgical & Materials Engineering. •;The book consists of nine chapters in two parts; five chapters in Part-I: Direct Reduction Processes and four chapters in Part-II: Smelting Reduction Processes. In Part-I, the Chapter 1 deals with a brief introduction of the sponge iron and classification of the direct reduction processes with their advantages and limitations. Chapter 2 deals with the raw materials involved in direct reduced ironmaking and their characteristics. In Chapter 3, the physico-chemical principles and thermodynamics of reduction are highlighted. The details of different direct reduction (DR) processes are discussed in Chapter 4. The characteristics and uses of DRI as well as its effect on Electric Arc Furnace performance is discussed in Chapter 5.

Author : Liming Lu
Publisher : Woodhead Publishing
Page : 842 pages
File Size : 27,2 MB
Release : 2021-12-02
Category : Technology & Engineering
ISBN : 0128202270

GET BOOK

Iron Ore: Mineralogy, Processing and Environmental Sustainability, Second Edition covers all aspects surrounding the second most important commodity behind oil. As an essential input for the production of crude steel, iron ore feeds the world's largest trillion-dollar-a-year metal market and is the backbone of the global infrastructure. The book explores new ore types and the development of more efficient processes/technologies to minimize environmental footprints. This new edition includes all new case studies and technologies, along with new chapters on the chemical analysis of iron ore, thermal and dry beneficiation of iron ore, and discussions of alternative iron making technologies. In addition, information on recycling solid wastes and P-bearing slag generated in steel mills, sustainable mining, and low emission iron making technologies from regional perspectives, particularly Europe and Japan, are included. This work will be a valuable resource for anyone involved in the iron ore industry. Provides an overall view of the entire value chain, from iron ore to metal Includes specific information on process/stage/operation in the value chain Discusses challenges and developments, along with future trends in the iron ore and steel industries Incorporates new, sustainable mining techniques

Author : M. Geerdes
Publisher : IOS Press
Page : 228 pages
File Size : 30,65 MB
Release : 2015-04-07
Category : Technology & Engineering
ISBN : 1614994994

GET BOOK

This book describes the blast furnace process for operators. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background is clarified. Operational observations, challenges and remedies are explained from this perspective. Optimization of the blast furnace process is not only based on “best practice transfer”, but also requires conceptual understanding of what works when. In other words: operational improvement is not only based on know–how, but on know–why as well. With Modern Blast Furnace Ironmaking – An Introduction (Third Edition, 2015) the reader has a compact compendium of the blast furnace process available: by operators and for operators and for those who are preparing to become operators.

Author : AHINDRA GHOSH
Publisher : PHI Learning Pvt. Ltd.
Page : 482 pages
File Size : 10,13 MB
Release : 2008-02-29
Category : Technology & Engineering
ISBN : 812033289X

GET BOOK

This authoritative account covers the entire spectrum from iron ore to finished steel. It begins by tracing the history of iron and steel production, right from the earlier days to today’s world of oxygen steelmaking, electric steelmaking, secondary steelmaking and continuous casting. The physicochemical fundamental concepts of chemical equilibrium, activity-composition relationships, and structure-properties of molten metals are introduced before going into details of transport phenomena, i.e. kinetics, mixing and mass transfer in ironmaking and steelmaking pro-cesses. Particular emphasis is laid on the understanding of the fundamental principles of the processes and their application to the optimisation of actual processes. Modern developments in blast furnaces, including modelling and process control are discussed along with an introduction to the alternative methods of ironmaking. In the area of steelmaking, BOF plant practice including pre-treatment of hot metal, metallurgical features of oxygen steelmaking processes, and their control form part of the book. It also covers basic open hearth, electric arc furnace and stainless steelmaking, before discussing the area of casting of liquid steel—ingot casting, continuous casting and near net shape casting. The book concludes with a chapter on the status of the ironmaking and steelmaking in India. In line with the application of theoretical principles, several worked-out examples dealing with fundamental principles as applied to actual plant situations are presented. The book is primarily intended for undergraduate and postgraduate students of metallurgical engineering. It would also be immensely useful to researchers in the area of iron and steel.