[PDF] Nanoaerosols Air Filtering And Respiratory Protection eBook

Author : Katarzyna Majchrzycka
Publisher : CRC Press
Page : 235 pages
File Size : 12,56 MB
Release : 2020-08-02
Category : Technology & Engineering
ISBN : 1000164128

GET BOOK

Recent toxicological studies show that nanoparticles released in technological processes and combustion processes outside industry can be dangerous for humans especially when entering the body through the mouth and nose. In connection with the above, the use of adequately effective respiratory protection equipment is of great importance in prophylactic and preventive activities. The first part of Nanoaerosols, Air Filtering and Respiratory Protection: Science and Practice refers to the general phenomena of filtration described on the basis of the authors’ own experience and international reports. The book also includes a description of the respiratory system and principles of its functioning and the accumulation of aerosol particles. It goes on to discuss technological innovations regarding the production of filtering materials for protection against nanoparticles and the latest test methods. Finally, the book contains information about the proper selection and use of respiratory protective devices against airborne nanoparticles in the workplace and everyday life. Special attention is paid to proper fit procedures as well as use and maintenance activities of such devices. The content of the book with rich illustrative material has been presented so that it can be used by health and safety experts, students as well as employers, employees and private users of respiratory protective devices. "Through a comprehensive approach to the subject of the work, the authors present theoretical foundations as well as practical solutions that are used in the research and development of personal respiratory protection. The complementarity of the information contained in the book will allow the reader to become familiar with a wide range of knowledge related to the design and manufacture as well as assessment of properties and procedures for the use of respiratory protection against the adverse effects of aerosols, including air contaminated with nanoparticles and microparticles. In my opinion the book is a valuable part of the series Occupational Safety, Health, and Ergonomics: Theory and Practice, published by Taylor & Francis." —Maciej Boguń, ŁUKASIEWICZ – The Textile Research Institute, Łódź

Author : Ching-tsen Bien
Publisher : CRC Press
Page : 555 pages
File Size : 15,94 MB
Release : 2023-07-28
Category : Technology & Engineering
ISBN : 1000945839

GET BOOK

For novices and experienced health and safety professionals alike, the Respiratory Protection Handbook fills a critical gap in the respiratory protection literature. This extensive guide provides all the information you need to dramatically expand your understanding of the concepts and day-to-day operations of respiratory protection. It is a fully self-contained text that expertly accomplishes two goals: first, for the novice, it clearly explains how to establish and implement an effective respiratory protection program; and second, for the experienced professional, it provides in-depth knowledge that goes beyond basics. Respiratory Protection Handbook addresses the development of respiratory protection devices, the capabilities and limitations of specific respirators, the respirator certification system, how to select appropriate filters, how to predict the service life of sorbents, fit testing methods, assigned protection factors, and much more. Nowhere else will you find a single source on this topic containing so much information.

Author : Wallace Woon-Fong Leung
Publisher : Elsevier
Page : 572 pages
File Size : 19,45 MB
Release : 2021-10-30
Category : Technology & Engineering
ISBN : 0323859852

GET BOOK

Nanofiber Filter Technologies for Filtration of Submicron Aerosols and Nanoaerosols covers the nanoaerosols (less than 100 nanometers) to larger submicron aerosols due mostly to pollution, which are present in high number concentration in our surroundings. People are breathing these nanoaerosols daily without being aware of it. Airborne viruses from flu to coronaviruses are also nanoaerosols. During the COVID-19 pandemic, it took a long time for health authorities and the General Public to recognize the airborne transmission mode of the virus. This leads to inadequate protection and ineffective virus control strategies resulting in high infection and death rates. The book cites evidence and observations pointing to the airborne transmission mode of the coronavirus. It also discusses different filtration technologies using nanofibers to capture these aerosols for short-term filtration, where aerosols are trapped in the filter (depth filtration), and long-term filtration, where aerosols are trapped in the growing filter cake (cake filtration). This book provides a good understanding on how nanofibers, which is of size 1/1000 times that of a normal human hair, can effectively filter these tiny aerosols. NFT, organized in four sections – fundamentals, deep understanding, technologies, and application, covering comprehensively on the subject, is a valuable resource for undergraduates and graduates, engineers, researchers and practitioners in related industries. Describes technologies with insight and use basic engineering principles to build-up technologies Includes extensive clear and understandable figures and tables to enhance key concepts Uses examples throughout to explain engineering principles and interdisciplinary concepts The only book in the market focusing on nanofiber filter technologies for filtering submicron aerosols and nanoaerosols

Author : Katarzyna Majchrzycka
Publisher : CRC Press
Page : 183 pages
File Size : 29,88 MB
Release : 2020-07-26
Category : Technology & Engineering
ISBN : 1000093735

GET BOOK

‘Protection against harmful bioaerosol is one of today’s major concerns. This applies both to people inside and outside the work environment. In this book, renowned scientists provide up-to-date and authoritative reviews of the latest scientific research and practice that has contributed to our understanding of the harmfulness of the bioaerosol and protection against it. A detailed discussion of bioaerosol protection methods and equipment as well as presenting future trends in prognostic modelling are the undeniable value of this monograph. This comprehensive book is indispensable for anyone involved in occupational and environmental hygiene, biological hazard, recognition and control in occupational and public environments’. — Bogumił Brycki, Adam Mickiewicz University The threats of biological airborne hazards are a global danger throughout the world today. Respiratory Protection Against Hazardous Biological Agents covers sources and practices of bioaerosol sampling, and discusses the prevention of these airborne hazards. The most common workplace hazard is poor air quality. The book provides the basic principles of a safe work environment in the conditions where workers might be exposed to harmful bioaerosols. It presents key characteristics of biological hazards and their effects on the human body. It examines microbial growth in filtering materials and provides the details of specific risks for users of respiratory protective devices. The book will present the reader a guide on how to measure the risk of exposure of biological agents and properly select respiratory protective devices. The book is ideal for the health and safety professionals and experts in the field of environmental health. FEATURES: Evaluates the risk of exposure to biological agents Describes the characteristics of biological factors and their effects on the human body Provides training on the importance of respiratory protective devices Examines microorganisms in the work environment Provides examples and case studies

Author : LeeAnn Racz
Publisher : CRC Press
Page : 559 pages
File Size : 43,41 MB
Release : 2017-11-22
Category : Science
ISBN : 1351109065

GET BOOK

Respiratory protection includes devices and management techniques for keeping people safe from hazardous materials. This handbook presents the state-of-the-art in respiratory protection technology as well as best management practices for work centers. Included are topics relevant to industry, government, and healthcare that provide guidance and tools for ensuring the best possible protection for workers. Most books on this topic are at least 20 years old. Research, technology and management techniques have advanced over the past two decades. This new handbook is needed to provide updated information relevant to today's occupational needs for industrial hygiene and safety professionals.

Author : Katarzyna Majchrzycka
Publisher : CRC Press
Page : 128 pages
File Size : 50,38 MB
Release : 2020-08-04
Category : Technology & Engineering
ISBN : 1000163962

GET BOOK

Head, Eye, and Face Personal Protective Equipment: New Trends, Practice, and Applications presents protective equipment in the context of the latest design trends, materials, and technologies. It informs the reader using basic safety principles to avoid issues with commonly used personal protective equipment (PPE), such as helmets and eye and face protectors. It provides the latest design trends in eye and face protectors to avoid optical hazards and for use in variable lighting conditions. Features: • Fills the gap on current solutions of PPE and occupational safety • Educates in reducing risk connected with using industrial safety gear • Helpful to optometrists in the selection of eye protection for people with visual impairments • Instructs the reader on choosing smart materials and safety products • Provides best practices for checking the technical condition of the equipment This book is essential for the safety professional and medical experts in the field. It provides an interdisciplinary approach to personal protective equipment using new technologies in the field. "The monograph Head, Eye, and Face Personal Protective Equipment - New Trends, Practice and Applications is a complementary and thoughtful but selected compilation of the most relevant information concerning protective helmets as well as eye and face protection. The compilation of these two protection types is the result of the common use of both protective helmets and eye and face protectors. This requires their full compatibility, both in terms of ensuring optimum safety and comfort of use. The authors have chosen the material according to the needs of people directly responsible for safety at work and users of those protectors. The main aim of the work is to popularise knowledge in the field of construction, research methods, selection and use of protective helmets and eye and face protectors. In terms of use, the authors emphasise the necessity of independent control, i.e. checking the technical condition of the equipment used by the end users. The presented monograph includes the current state of knowledge in this scope, extended by the results and summaries of the authors' own research. All requirements and research methods are given based on European (EN), international (ISO) standards and standards operating in different geographical areas. The monograph also encompasses new trends in the design of protective helmets and eye and face protectors. All this allows me to emphasize the uniqueness of this monograph in relation to previous publications in this field, both in terms of the scope and selection of information concerning protective helmets and eye and face protectors." — Ryszard Korycki, Łódź University of Technology

Author : Daniel Podgórski
Publisher : CRC Press
Page : 179 pages
File Size : 40,92 MB
Release : 2020-07-08
Category : Technology & Engineering
ISBN : 1000080277

GET BOOK

Global economy and its business environment, and thus the world of work, have recently been influenced by demographic and social changes, globalisation, as well as rapid development and introduction of novel, sophisticated and previously unknown technologies and new business models, especially in the context of the so-called fourth industrial revolution. These changes pose a number of challenges in terms of maintaining and improving occupational safety and health (OSH) management performance, as traditional approaches to OSH management in new working environments may no longer be effective. In view of the above, the overall goal of this book is to present new approaches and methods for improving the effectiveness of OSH management. They are based on state-of-the-art research and are in line with the latest trends and concepts in the field. The book focuses on five thematic areas, which are discussed in respective chapters: 1) Implementing the process approach to OSH management; 2) Improving OSH management systems with fuzzy cognitive maps; 3) Implementing strategic thinking approaches in relation to OSH management; 4) Integrating OSH management within the framework of the CSR concept; 5) Enhancing OSH management processes through the use of smart digital technologies. The methods and solutions discussed may be considered as specific "opportunities" for the improvement to be taken into account in the processes of implementing and maintaining an OSH management system in light of the requirements of the new ISO 45001 standard.

Author : Rafał Górny
Publisher : CRC Press
Page : 165 pages
File Size : 35,86 MB
Release : 2020-08-09
Category : Technology & Engineering
ISBN : 1000167054

GET BOOK

Environmental stress caused by water continuously exposes buildings to microbial colonization. This is highly evident when both minor dampness and mass flooding occur. The text describes how microbiological corrosion of buildings and the structures and substances derived from these hazards are responsible for adverse health effects on people exposed to these contaminated environments. Microbiological Corrosion of Buildings: A Guide to Detection, Health Hazards, and Mitigation describes the key elements and methods for neutralising and removing microbiological contamination, and the operating algorithm for checking the effectiveness of preventative solutions. Ideal for construction engineers, microbiologists and professionals in the field. Features: Latest methods for detection of indoor microbial hazards Identifies the tools needed for natural, non-destructive and non-invasive methods of bio-corrosion removal Describes the social and health problems associated with exposure to microbiological hazards Provides case studies and examples of microorganisms responsible for microbial corrosion. ‘Climate change and the associated adverse effects, such as floods and whirlwinds, make the problem of microbiological corrosion of buildings that generates health risks and economic losses on a global scale, the focus of science and technology. The monograph presents a complex problem of building bio-corrosion, that requires knowledge of the distant fields of microbiology and building technology, for the use of both scientists and practitioners. This pioneering work of an interdisciplinary nature harmoniously combines knowledge on specific microbiological issues relating to the process of bio-corrosion and the associated health risks with detailed issues of construction technology concerning the prevention of bio-corrosion and its removal. The authors succeeded in combining a very high scientific level in the monograph with an accessible and understandable presentation of complex problems. The extensive references, ranging from "classical" items from many years ago to the most recent articles presenting the state of the art in this field, are worth emphasising.’ —Prof. Jacek Dutkiewicz, Ph.D., D.Sc., Institute of Rural Health in Lublin

Author : Agnieszka Wolska
Publisher : CRC Press
Page : 221 pages
File Size : 31,56 MB
Release : 2020-07-29
Category : Technology & Engineering
ISBN : 1000168042

GET BOOK

The introduction of artificial lighting extends the time of wakefulness after dark and enables work at night, thus disturbing the human circadian rhythm. The understanding of the physiological mechanisms of visual and non-visual systems may be important for the development and use of proper light infrastructure and light interventions for different workplace settings, especially for shift work conditions. Visual and Non-Visual Effects of Light: Working Environment and Well-Being presents the impact of lighting in the working environment on human health, well-being and visual performance. The physiological explanation of the visual and non-visual effects of light on humans which discusses the biological bases of image and non-image forming vision at the cellular level may be of particular interest to any professional in the field of medicine, physiology, and biology. It is one of the intentions of this book to put forward some recommendations and examples of lighting design which take into account both the visual and non-visual effects of light on humans. These may be of particular interest to any professional in the field of lighting, occupational safety and health, and interior design. "What effects on health can a light ‘overdose’ or light deficiency have? What is bad light? The authors of the monograph provide answers to these questions. Just as for a physicist, the dual nature of light comprises an electromagnetic wave and a photon, the duality of light for a physician comprises visual and non-visual effects." --------------------------------------------------------Prof Jacek Przybylski, Medical University of Warsaw "This is a unique publication in the field of lighting technology. The authors have skillfully combined both the technical and biomedical aspects involved, which is unprecedented in the literature available. As a result, an important study has been created for many professional groups, with a significant impact on the assessment of risks associated with LED sources." --------------------------------------------Prof Andrzej Zając, Military University of Technology, Warsaw

Author : Andrzej Grabowski
Publisher : CRC Press
Page : 183 pages
File Size : 47,36 MB
Release : 2020-07-29
Category : Technology & Engineering
ISBN : 100007725X

GET BOOK

Virtual reality (VR) techniques are becoming increasingly popular. The use of computer modeling and visualization is no longer uncommon in the area of ergonomics and occupational health and safety. This book explains how studies conducted in a simulated virtual world are making it possible to test new solutions for designed workstations, offering a high degree of ease for introducing modifications and eliminating risk and work-related accidents. Virtual reality techniques offer a wide range of possibilities including increasing the cognitive abilities of the elderly, adapting workstations for people with disabilities and special needs, and remote control of machines using collaborative robots. Detailed discussions include: Testing protective devices, safety systems, and the numerical reconstruction of work accidents Using computer simulation in generic virtual environments On the one hand, it is a self-study book made so by well-crafted and numerous examples. On the other hand, through a detailed analysis of the virtual reality from a point of view of work safety and ergonomics and health improvement. Ewa Grabska, Jagiellonian University, Kraków, Poland Noteworthy is the broad scope and diversity of the addressed problems, ranging from training employees using VR environments with different degrees of perceived reality; training and rehabilitation of the elderly; to designing, testing, modifying, and adapting workplaces to various needs including those of disabled workers; to simulation and investigation of the cause of accidents at a workplace. Andrzej Krawiecki, Warsaw University of Technology, Warsaw, Poland