[PDF] Multiple Scale Numerical Analysis Of Composites Based On Augmented Finite Element Method eBook

Author : Zhiqiang Zhou
Publisher :
Page : pages
File Size : 17,99 MB
Release : 2010
Category :
ISBN :

GET BOOK

Advanced composites are playing a rapidly increasing role in all fields of material and structural related engineering practices. Damage tolerance analysis must be a critical integral part of composite structural design. The predictive capabilities of existing models have met with limited success because they typically can not account for multiple damage evolution and their coupling. As a result, current composite design is heavily dependent upon lengthy and costly test programs and empirical design methods. There is an urgent need for efficient numerical tools that are capable of analyzing the progressive failure caused by nonlinearly coupled, multiple damage evolution in composite materials. Such numerical tools are a necessity in achieving virtual testing of composites and other heterogeneous materials. In this thesis, an advanced finite element method named augmented finite element method (A-FEM) has been developed. This method is capable of incorporating nonlinear cohesive damage descriptions for major damage modes observed in composite materials. It also allows for arbitrary nucleation and propagation of such cohesive damages upon satisfactory of prescribed initiation and propagation criterion. Major advantages of the A-FEM include: 1) arbitrary cohesive cracking without the need of remeshing; 2) full compatibility with existing FEM packages; and 3) easy inclusion of intra-element material heterogeneity. The numerical capabilities of the A-FEM have been demonstrated through direct comparisons between prediction results and experimental observations of typical composite tests including 3-point bending of unidirectional laminates, open-hole tension of quasi-isotropic laminates, and double-notched tension of orthogonal laminates. In all these tests, A-FEM can predict not only the qualitative damage patterns but also quantitatively the nonlinear stress-strain curves and other history-dependent results. The excellent numerical capability of A-FEM in accurately accounting for multiple cracking in composites enables the use of A-FEM as a multi-scale numerical platform for virtual testing of composites. This has been demonstrated by a series of representative volume element (RVE) analyses which explicitly considered microscopic matrix cracking and fiber matrix interface debonding. In these cases the A-FEM successfully predicted the cohesive failure descriptions which can be used for macroscopic composite failure analyses. At the sublaminate scale, the problem of a transverse tunneling crack and its induced local delamination has been studied in detail. Two major coupling modes, which depends on the mode-I to mode-II fracture toughness ratio and cohesive strength values, has been revealed and their implications in composite engineering has been fully discussed. Finally, future improvements to the A-FEM so that it can be more powerful in serving as a numerical platform for virtual testing of composites are discussed.

Author : Sergio Oller
Publisher : Springer
Page : 228 pages
File Size : 46,62 MB
Release : 2014-09-04
Category : Technology & Engineering
ISBN : 331904933X

GET BOOK

An original mechanical formulation to treat nonlinear orthotropic behavior of composite materials is presented in this book. It also examines different formulations that allow us to evaluate the behavior of composite materials through the composition of its components, obtaining a new composite material. Also two multiple scale homogenization methods are given, one based on the analytical study of the cells (Ad-hoc homogenization) and other one, more general based on the finite element procedure applied on the macro scale (upper-scale) and in the micro scale (sub-scale). A very general formulation to simulate the mechanical behavior for traditional composite structures (plywood, reinforced concrete, masonry, etc.), as well as the new composite materials reinforced with long and short fibers, nanotubes, etc., are also shown in this work. Typical phenomena occurring in composite materials are also described in this work, including fiber-matrix debonding, local buckling of fibers and its coupling with the overall buckling of the structure. Finally, several numerical examples that evaluates the qualities and capabilities of the general model formulated are offered in this book. This book is intended for graduate engineering students who want to expand their knowledge of composite structures behavior.

Author : J.W. Bull
Publisher : Springer Science & Business Media
Page : 457 pages
File Size : 15,78 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 9401106037

GET BOOK

Composite materials are increasingly used in many applications because they offer the engineer a range of advantages over traditional materials. They are often used in situations where a specified level of performance is required, but where the cost of testing the materials under the extremes of those specifications is very high. In order to solve this problem, engineers are turning to computer Modelling to evaluate the materials under the range of conditions they are likely to encounter. Many of these analyses are carried out in isolation, and yet the evaluation of a range of composites can be carried out using the same basic principles. In this new book the editor has brought together an international panel of authors, each of whom is working on the analysis and Modelling of composite materials. The overage of the book is deliberately wide; to illustrate that similar principles and methods can be used to model and evaluate a wide range of materials. It is also hoped that, by bringing together this range of topics, the insight gained in the study of one composite can be recognized and utilized in the study of others. Professional engineers involved in the specification and testing of composite material structures will find this book an invaluable resource in the course of their work. It will also be of interest to those industrial and academic engineers involved in the design, development, manufacture and applications of composite materials.

Author : Ever J. Barbero
Publisher : CRC Press
Page : 572 pages
File Size : 34,2 MB
Release : 2023-05-04
Category : Science
ISBN : 1000871916

GET BOOK

Developed from the author’s course on advanced mechanics of composite materials, Finite Element Analysis of Composite Materials with Abaqus® shows how powerful finite element tools tackle practical problems in the structural analysis of composites. This Second Edition includes two new chapters on "Fatigue" and "Abaqus Programmable Features" as well as a major update of chapter 10 "Delaminations" and significant updates throughout the remaining chapters. Furthermore, it updates all examples, sample code, and problems to Abaqus 2020. Unlike other texts, this one takes theory to a hands-on level by actually solving problems. It explains the concepts involved in the detailed analysis of composites, the mechanics needed to translate those concepts into a mathematical representation of the physical reality, and the solution of the resulting boundary value problems using Abaqus. The reader can follow a process to recreate every example using Abaqus graphical user interface (CAE) by following step-by-step directions in the form of pseudo-code or watching the solutions on YouTube. The first seven chapters provide material ideal for a one-semester course. Along with offering an introduction to finite element analysis for readers without prior knowledge of the finite element method, these chapters cover the elasticity and strength of laminates, buckling analysis, free edge stresses, computational micromechanics, and viscoelastic models for composites. Emphasizing hereditary phenomena, the book goes on to discuss continuum and discrete damage mechanics as well as delaminations and fatigue. The text also shows readers how to extend the capabilities of Abaqus via "user subroutines" and Python scripting. Aimed at advanced students and professional engineers, this textbook features 62 fully developed examples interspersed with the theory, 82 end-of-chapter exercises, and 50+ separate pieces of Abaqus pseudo-code that illustrate the solution of example problems. The author’s website offers the relevant Abaqus and MATLAB model files available for download, enabling readers to easily reproduce the examples and complete the exercises: https://barbero.cadec-online.com/feacm-abaqus/index.html. Video recording of solutions to examples are available on YouTube with multilingual captions.

Author : Marco Petrolo
Publisher : Springer
Page : 193 pages
File Size : 36,77 MB
Release : 2019-02-24
Category : Science
ISBN : 3030119696

GET BOOK

This book gathers contributions addressing issues related to the analysis of composite structures, whose most relevant common thread is augmented numerical efficiency, which is more accurate for given computational costs than existing methods and methodologies. It first presents structural theories to deal with the anisotropy of composites and to embed multifield and nonlinear effects to extend design capabilities and provide methods of augmenting the fidelity of structural theories and lowering computational costs, including the finite element method. The second part of the book focuses on damage analysis; the multiscale and multicomponent nature of composites leads to extremely complex failure mechanisms, and predictive tools require physics-based models to reduce the need for fitting and tuning based on costly and lengthy experiments, and to lower computational costs; furthermore the correct monitoring of in-service damage is decisive in the context of damage tolerance. The third part then presents recent advances in embedding characterization and manufacturing effects in virtual testing. The book summarizes the outcomes of the FULLCOMP (FULLy integrated analysis, design, manufacturing, and health-monitoring of COMPosite structures) research project.

Author : Ever J. Barbero
Publisher : CRC Press
Page : 445 pages
File Size : 42,71 MB
Release : 2013-04-18
Category : Mathematics
ISBN : 1466516615

GET BOOK

Developed from the author’s graduate-level course on advanced mechanics of composite materials, Finite Element Analysis of Composite Materials with AbaqusTM shows how powerful finite element tools address practical problems in the structural analysis of composites. Unlike other texts, this one takes the theory to a hands-on level by actually solving problems. It explains the concepts involved in the detailed analysis of composites, the mechanics needed to translate those concepts into a mathematical representation of the physical reality, and the solution of the resulting boundary value problems using the commercial finite element analysis software Abaqus. The first seven chapters provide material ideal for a one-semester course. Along with offering an introduction to finite element analysis for readers without prior knowledge of the finite element method (FEM), these chapters cover the elasticity and strength of laminates, buckling analysis, free edge stresses, computational micromechanics, and viscoelastic models and composites. Emphasizing hereditary phenomena, the book goes on to discuss continuum and discrete damage mechanics as well as delaminations. More than 50 fully developed examples are interspersed with the theory, more than 75 exercises are included at the end of each chapter, and more than 50 separate pieces of Abaqus pseudocode illustrate the solution of example problems. The author’s website offers the relevant Abaqus and MATLAB® model files available for download, enabling readers to easily reproduce the examples and complete the exercises. The text also shows readers how to extend the capabilities of Abaqus via "user subroutines" and Python scripting.

Author : Pedro P. Camanho
Publisher : Woodhead Publishing
Page : 562 pages
File Size : 47,59 MB
Release : 2015-08-07
Category : Technology & Engineering
ISBN : 0081003420

GET BOOK

Numerical Modelling of Failure in Advanced Composite Materials comprehensively examines the most recent analysis techniques for advanced composite materials. Advanced composite materials are becoming increasingly important for lightweight design in aerospace, wind energy, and mechanical and civil engineering. Essential for exploiting their potential is the ability to reliably predict their mechanical behaviour, particularly the onset and propagation of failure. Part One investigates numerical modeling approaches to interlaminar failure in advanced composite materials. Part Two considers numerical modelling approaches to intralaminar failure. Part Three presents new and emerging advanced numerical algorithms for modeling and simulation of failure. Part Four closes by examining the various engineering and scientific applications of numerical modeling for analysis of failure in advanced composite materials, such as prediction of impact damage, failure in textile composites, and fracture behavior in through-thickness reinforced laminates. Examines the most recent analysis models for advanced composite materials in a coherent and comprehensive manner Investigates numerical modelling approaches to interlaminar failure and intralaminar failure in advanced composite materials Reviews advanced numerical algorithms for modeling and simulation of failure Examines various engineering and scientific applications of numerical modelling for analysis of failure in advanced composite materials

Author : Marcin Marek Kaminski
Publisher : Springer Science & Business Media
Page : 434 pages
File Size : 33,27 MB
Release : 2006-03-30
Category : Technology & Engineering
ISBN : 1846280494

GET BOOK

Computational Mechanics of Composite Materials lays stress on the advantages of combining theoretical advancements in applied mathematics and mechanics with the probabilistic approach to experimental data in meeting the practical needs of engineers. Features: Programs for the probabilistic homogenisation of composite structures with finite numbers of components allow composites to be treated as homogeneous materials with simpler behaviours. Treatment of defects in the interfaces within heterogeneous materials and those arising in composite objects as a whole by stochastic modelling. New models for the reliability of composite structures. Novel numerical algorithms for effective Monte-Carlo simulation. Computational Mechanics of Composite Materials will be of interest to academic and practising civil, mechanical, electronic and aerospatial engineers, to materials scientists and to applied mathematicians requiring accurate and usable models of the behaviour of composite materials.

Author : Wim Van Paepegem
Publisher : Woodhead Publishing
Page : 764 pages
File Size : 18,49 MB
Release : 2020-12-10
Category : Technology & Engineering
ISBN : 0128189843

GET BOOK

Multi-scale modelling of composites is a very relevant topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large industrial players such as Siemens (Virtual Material Characterization toolkit and MultiMechanics virtual testing software), MSC/e-Xstream (Digimat software), Simulia (micromechanics plug-in in Abaqus), HyperSizer (Multi-scale design of composites), Altair (Altair Multiscale Designer) This book is intended to be an ideal reference on the latest advances in multi-scale modelling of fibre-reinforced polymer composites, that is accessible for both (young) researchers and end users of modelling software. We target three main groups: This book aims at a complete introduction and overview of the state-of-the-art in multi-scale modelling of composites in three axes: . ranging from prediction of homogenized elastic properties to nonlinear material behaviour . ranging from geometrical models for random packing of unidirectional fibres over meso-scale geometries for textile composites to orientation tensors for short fibre composites . ranging from damage modelling of unidirectionally reinforced composites over textile composites to short fibre-reinforced composites The book covers the three most important scales in multi-scale modelling of composites: (i) micro-scale, (ii) meso-scale and (iii) macro-scale. The nano-scale and related atomistic and molecular modelling approaches are deliberately excluded, since the book wants to focus on continuum mechanics and there are already a lot of dedicated books about polymer nanocomposites. A strong focus is put on physics-based damage modelling, in the sense that the chapters devote attention to modelling the different damage mechanisms (matrix cracking, fibre/matrix debonding, delamination, fibre fracture,.) in such a way that the underlying physics of the initiation and growth of these damage modes is respected. The book also gives room to not only discuss the finite element based approaches for multi-scale modelling, but also much faster methods that are popular in industrial software, such as Mean Field Homogenization methods (based on Mori-Tanaka and Eshelby solutions) and variational methods (shear lag theory and more advanced theories). Since the book targets a wide audience, the focus is put on the most common numerical approaches that are used in multi-scale modelling. Very specialized numerical methods like peridynamics modelling, Material Point Method, eXtended Finite Element Method (XFEM), isogeometric analysis, SPH (Smoothed Particle Hydrodynamics),. are excluded. Outline of the book The book is divided in three large parts, well balanced with each a similar number of chapters: Part I deals with all "ingredients" to start with multi-scale modelling, limited to elastic property prediction. This typically includes: (i) setting up your geometrical model at micro- or meso-scale (definition of Representative Volume Element (RVE) or Repeating Unit Cell (RUC)), (ii) definition of periodic boundary conditions, (iii) homogenization of the elastic properties, starting from the elastic properties of the constituents, (iv) importance of statistical representation of geometry and stochastic nature of fibre architecture. This should bring all readers at the same level of principles and terminology for multi-scale modelling. Advanced users could eventually skip this first part. Part II deals with nonlinear multi-scale modelling. We build further upon the ingredients from Part I, but now add all kinds of nonlinearities to the simulation at micro- or meso-scale (matrix cracking, delamination, fibre/matrix debonding, delamination, fibre failure, visco-elasto-plasticity-damage of the polymer matrix,.). Not only finite element based techniques are covered, but also much faster inclusion methods (Mori-Tanaka, Eshelby,.) and variational methods. Part III deals with the laminate scale or macro-scale, where all these multi-scale modelling tools are applied for macro-scale ply-based modelling and virtual testing of laminates (in static loading, but also sometimes for prediction of fatigue, post-impact strength,.). In all three parts, the main three types of fibre reinforcement are covered (unidirectionally reinforced composites, textile composites and short fibre composites). The chapters are written by leading authorities from academia, and each chapter gives a self-contained overview of a specific topic, covering the state-of-the-art and future research challenges. . all software users, R&D people and researchers that have some knowledge in general continuum mechanics modelling of composites, but have never worked in the field of multi-scale modelling, . this book should also provide a strong theoretical background to the end users of commercial multi-scale modelling tools, and warn them for the pitfalls and difficulties in obtaining results with such software, . for advanced users and researchers in multi-scale modelling, the book will still be of much value, because almost nobody will cover in his/her own research the complete field of knowledge that is described in this book.

Author : Ever J. Barbero
Publisher : CRC Press
Page : 366 pages
File Size : 12,79 MB
Release : 2013-12-11
Category : Mathematics
ISBN : 1466516909

GET BOOK

Designing structures using composite materials poses unique challenges, especially due to the need for concurrent design of both material and structure. Students are faced with two options: textbooks that teach the theory of advanced mechanics of composites, but lack computational examples of advanced analysis, and books on finite element analysis