[PDF] Metal Plasticity And Fatigue At High Temperature eBook

Author : Denis Benasciutti
Publisher : MDPI
Page : 220 pages
File Size : 49,2 MB
Release : 2020-05-20
Category : Technology & Engineering
ISBN : 3039287702

GET BOOK

In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue.

Author : Denis Benasciutti
Publisher :
Page : 220 pages
File Size : 24,9 MB
Release : 2020
Category : Engineering (General). Civil engineering (General)
ISBN : 9783039287710

GET BOOK

In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount--more or less pronounced--of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue.

Author : S. S. Manson
Publisher : ASM International
Page : 277 pages
File Size : 40,97 MB
Release : 2009
Category : Science
ISBN : 1615030549

GET BOOK

From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.

Author : Jaroslav Polák
Publisher : Elsevier Publishing Company
Page : 324 pages
File Size : 32,23 MB
Release : 1991
Category : Technology & Engineering
ISBN :

GET BOOK

Hardbound. Low cycle fatigue failures have been identified as being connected with the low number of repeated working cycles of equipment which usually results from start-up, shut-down operations, or some necessary interruption of ordinary use. The vast amount of research carried out so far has shown that only detailed knowledge of the proper mechanisms, and thus recognition of the important parameters governing the fatigue failure, can effectively improve engineering design procedures. This book concentrates on the physical metallurgy approach to elastoplastic cyclic straining and its relation to the fatigue life of metals. Recent breakthroughs in the understanding of the appropriate mechanisms is summarized and the importance of short crack growth is emphasised. Special attention is given to the identification of the basic mechanisms underlying cyclic plastic straining, damage evolution, fatigue crack initiation and growth, which results in final frac

Author : Joël Lépinoux
Publisher : Springer Science & Business Media
Page : 540 pages
File Size : 43,9 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 9401140480

GET BOOK

A profusion of research and results on the mechanical behaviour of crystalline solids has followed the discovery of dislocations in the early thirties. This trend has been enhanced by the development of powerful experimental techniques. particularly X ray diffraction. transmission and scanning electron microscopy. microanalysis. The technological advancement has given rise to the study of various and complex materials. not to speak of those recently invented. whose mechanical properties need to be mastered. either for their lise as structural materials. or more simply for detenllining their fonnability processes. As is often the case this fast growth has been diverted both by the burial of early fundamental results which are rediscovered more or less accurately. and by the too fast publication of inaccurate results. which propagate widely. and are accepted without criticism. Examples of these statements abound. and will not be quoted here for the sake of dispassionateness. Understanding the mechanical properties of materials implies the use of various experimental techniques. combined with a good theoretical knowledge of elasticity. thermodynamics and solid state physics. The recent development of various computer techniques (simulation. ab initio calculations) has added to the difficulty of gathering the experimental information. and mastering the theoretical understanding. No laboratory is equipped with all the possible experimental settings. almost no scientist masters all this theoretical kno\vledge. Therefore. cooperation between scientists is needed more than even before.

Author : Andrzej Weronski
Publisher : CRC Press
Page : 386 pages
File Size : 33,95 MB
Release : 1991-07-25
Category : Technology & Engineering
ISBN : 9780824777265

GET BOOK

Using a mold for centrifugal casting as an example, discusses the types of apparatus and tools that are commonly affected by thermal fatigue during industrial processes, and examines the various factors that lead to such failure. Focuses on the performance of particular industrial components under d