[PDF] Mechanical Engineering Technologies And Applications Volume 2 eBook

Author : Zied Driss
Publisher : Bentham Science Publishers
Page : 193 pages
File Size : 19,60 MB
Release : 2023-11-30
Category : Science
ISBN : 9815124137

GET BOOK

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.

Author : Zied Driss
Publisher : Bentham Science Publishers
Page : 134 pages
File Size : 15,54 MB
Release : 2023-12-28
Category : Science
ISBN : 9815179284

GET BOOK

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 3 includes the following topics: Numerical simulations of three-dimensional laminar mixed convection heat transfer of water-based-Al2O3 nanofluid in an open cubic cavity with a heated block. Nonlinear formulations of Element-Free Galerkin Method (EFGM) for large deformation analysis of Ogden’s hyperelastic materials, emphasizing incompressibility and mesh distortion avoidance. Development of a 3D numerical model with LS-DYNA using a coupled SPH-FEM method to simulate hydraulic behavior of a Ski-Jump Spillway with dentates, showcasing precision through validation. Exploration of enhancing the inlet system of an LPG-H2 fueled engine using a static inclined blade turbine, analyzed through Computational Fluid Dynamics (CFD) simulations. Effective utilization of Artificial Neural Networks (ANN) in heat transfer applications, addressing issues like fouling in heat exchangers, showcasing their accuracy compared to experimental data. Investigation of the impact of nitrogen concentration on the structure and properties of ZrN coatings deposited by magnetron sputtering, evaluating variations in structural and mechanical properties. Forced convection in a horizontal cylindrical pipe with pseudoplastic fluid, considering uniform constant heat flux and uniform temperature as boundary conditions. Modeling and experimental study of a water solar collector coupled to an optimized solar still, aiming to enhance freshwater production in a solar distillation system under specific climatic conditions. Exploration of the effect of film thickness on the structure and properties of Ti-N films deposited by magnetron sputtering, utilizing theoretical and experimental analysis to confirm the rock salt TiN structure. The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology. Readership Graduate students, PhD candidates and professionals seeking basic and applied information related to mechanical engineering and technology.

Author : Zied Driss
Publisher : Bentham Science Publishers
Page : 0 pages
File Size : 44,47 MB
Release : 2023-11-30
Category :
ISBN : 9789815124149

GET BOOK

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: -Numerical investigation of turbulent slot jets with various nanoparticle shapes -Experimental study on a sweeping gas membrane distillation unit -Development of design processes for multi-spindle drilling using a neural network and expert systems -Experimental investigation of a new hybrid solar collector (PV/t) system -Theoretical study of the effects of combustion duration on engine performance -Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion -Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures -Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant -Numerical investigations of the effect of packed bed porosity on the flow behavior -Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.

Author : Myer Kutz
Publisher : John Wiley & Sons
Page : 1008 pages
File Size : 26,69 MB
Release : 2015-02-02
Category : Technology & Engineering
ISBN : 1118112830

GET BOOK

Full coverage of electronics, MEMS, and instrumentation and control in mechanical engineering This second volume of Mechanical Engineers' Handbook covers electronics, MEMS, and instrumentation and control, giving you accessible and in-depth access to the topics you'll encounter in the discipline: computer-aided design, product design for manufacturing and assembly, design optimization, total quality management in mechanical system design, reliability in the mechanical design process for sustainability, life-cycle design, design for remanufacturing processes, signal processing, data acquisition and display systems, and much more. The book provides a quick guide to specialized areas you may encounter in your work, giving you access to the basics of each and pointing you toward trusted resources for further reading, if needed. The accessible information inside offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations you'll find in other handbooks. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering anywhere in four interrelated books Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and custom formats Engineers at all levels will find Mechanical Engineers' Handbook, Volume 2 an excellent resource they can turn to for the basics of electronics, MEMS, and instrumentation and control.

Author : Myer Kutz
Publisher : John Wiley & Sons
Page : 1008 pages
File Size : 33,46 MB
Release : 2015-03-02
Category : Technology & Engineering
ISBN : 1118930800

GET BOOK

Full coverage of electronics, MEMS, and instrumentation and control in mechanical engineering This second volume of Mechanical Engineers' Handbook covers electronics, MEMS, and instrumentation and control, giving you accessible and in-depth access to the topics you'll encounter in the discipline: computer-aided design, product design for manufacturing and assembly, design optimization, total quality management in mechanical system design, reliability in the mechanical design process for sustainability, life-cycle design, design for remanufacturing processes, signal processing, data acquisition and display systems, and much more. The book provides a quick guide to specialized areas you may encounter in your work, giving you access to the basics of each and pointing you toward trusted resources for further reading, if needed. The accessible information inside offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations you'll find in other handbooks. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering anywhere in four interrelated books Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and custom formats Engineers at all levels will find Mechanical Engineers' Handbook, Volume 2 an excellent resource they can turn to for the basics of electronics, MEMS, and instrumentation and control.

Author : Aravamudhan Raman
Publisher :
Page : 554 pages
File Size : 32,7 MB
Release : 2007
Category : Technology & Engineering
ISBN :

GET BOOK

Unlike any other text of its kind, Materials Selection and Applications in Mechanical Engineering contains complete and in-depth coverage on materials of use, their principles, processing and handling details; along with illustrative examples and sample projects. It clearly depicts the needed topics and gives adequate coverage with ample examples so that ME students can appreciate the relevance of materials to their discipline. Featuring the basic principles of materials selection for application in various engineering outcomes, the contents of this text follow those of the common first-level introductory course in materials science and engineering. Directed toward mechanical engineering, it introduces the materials commonly used in this branch, along with an exhaustive description of their properties that decide their functional characteristics and selection for use, typical problems encountered during application due to improper processing or handling of materials, non-destructive test procedures used in maintenance to detect and correct problems, and much more. What's more, numerous examples and project-type analyses to select proper materials for application are provided. With the use of this unique text, teaching a relevant second-level course in materials to ME majors has never been easier Covers all aspects of engineering materials necessary for their successful utilization in mechanical components and systems. Defines a procedure to evaluate the materials' performance efficiency in engineering applications and illustrates it with a number of examples. Includes sample project activities, along with a number of assignments for self exercise. Keeps chapters short and targeted toward specific topics for easy assimilation. Contains several unique chapters, including microprocessing, MEMS, problems encountered during use of materials in mechanical components, and NDT procedures used to detect common defects such as cracks, porosity and gas pockets, internal residual stresses, etc. Features commonly used formulae in mechanical system components in an appendix. Several tables containing material properties are included throughout the book.

Author : Cornelius T. Leondes
Publisher : CRC Press
Page : 428 pages
File Size : 14,71 MB
Release : 2000-08-08
Category : Technology & Engineering
ISBN : 9789056996727

GET BOOK

The technical committee on mechatronics formed by the International Federation for the Theory of Machines and Mechanisms, in Prague, Czech Republic, adopted the following definition for the term: Mechatronics is the Synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design products and manufacturing process. Recent developments in computer engineering, including the exponential improvements in microprocessors, Application Specific Integrated Circuits (ASICs), along with advances in computational techniquesand advances and the product design process, has led to the field of mechatronics evolving as a highly powerful and most cost effective means for product realization. This volume focuses on mechatronics in transportation and vehicular systems and clearly reveals the effectiveness and essential significance of techniques available and with further development, the continuing essential role they will play in the future.

Author : David Jin
Publisher : Springer Science & Business Media
Page : 650 pages
File Size : 38,60 MB
Release : 2012-06-26
Category : Technology & Engineering
ISBN : 364231516X

GET BOOK

This book includes the volume 2 of the proceedings of the 2012 International Conference on Mechanical and Electronic Engineering(ICMEE2012), held at June 23-24,2012 in Hefei, China. The conference provided a rare opportunity to bring together worldwide researchers who are working in the fields. This volume 2 is focusing on Mechatronic Engineering and Technology, Electronic Engineering and Electronic Information Technology .

Author : Milind Shrinivas Dangate
Publisher : John Wiley & Sons
Page : 388 pages
File Size : 18,98 MB
Release : 2023-06-20
Category : Science
ISBN : 1394193661

GET BOOK

INTEGRATED GREEN ENERGY SOLUTIONS This second volume in a two-volume set continues to present the state of the art for the concepts, practical applications, and future of renewable energy and how to move closer to true sustainability. Renewable energy supplies are of ever-increasing environmental and economic importance in every country in the world. A wide range of renewable energy technologies has been established commercially and recognized as an important set of growth industries for most governments. World agencies, such as the United Nations, have extensive programs to encourage these emerging technologies. This book will bridge the gap between descriptive reviews and specialized engineering technologies. It centers on demonstrating how fundamental physical processes govern renewable energy resources and their applications. Although the applications are being updated continually, the fundamental principles remain the same, and this book will provide a useful platform for those advancing the subject and its industries. Integrated Resilient Energy Solutions is a two-volume set covering subjects of proven technical and economic importance worldwide. Energy supply from renewables is an essential component of every nation’s strategy, especially when there is responsibility for the environment and sustainability. These two volumes will consider the timeless renewable energy technologies’ principles yet demonstrate modern applications and case studies. Whether for the veteran engineer, student, or other professional, these two volumes are a must-have for any library.

Author : Michael F. Ashby
Publisher : Elsevier
Page : 380 pages
File Size : 32,95 MB
Release : 2014-06-28
Category : Technology & Engineering
ISBN : 1483297217

GET BOOK

Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.