[PDF] Magnetic Superconductors eBook

Author : V. Al'tov
Publisher : Springer Science & Business Media
Page : 343 pages
File Size : 47,39 MB
Release : 2013-03-09
Category : Science
ISBN : 1461341159

GET BOOK

I am indeed pleased to prepare this brief foreword for this book, written by several of my friends and colleagues in the Soviet Union. The book was first published in the Russian language in Moscow in 1975. The phenomenon of superconductivity was discovered in 1911 and promised to be important to the production of electromagnets since superconductors would not dissipate Joule heat. Unfortunate ly the first materials which were discovered to be superconducting reverted to the normal resistive state in magnetic fields of a few tesla. Thus the development that was hoped for by hundredths of a the early pioneers was destined to be delayed for over half a century. In 1961 the intermetallic compound NbaSn was found to be superconducting in a field of about 200 teslas. This breakthrough marked a turning point, and 50 years after the discovery of superconductivity an intensive period of technological development began. There are many applications of superconductivity that are now being pursued, but perhaps one of the most important is super conducting magnetic systems. There was a general feeling in the early 1960s that the intermetallic compounds and alloys that were found to retain superconductivity in the presence of high magnetic fields would make the commercialization of superconducting magnets a relatively simple matter. However, the next few years were ones of disillusionment; large magnets were found to be unstable, causing them to revert to the normal state at much lower magnetic fields than predicted.

Author : T.L. Francavilla
Publisher : Springer Science & Business Media
Page : 609 pages
File Size : 26,57 MB
Release : 2013-11-11
Category : Science
ISBN : 1489923799

GET BOOK

The workshop entitled Magnetic Susceptibility of Superconductors and other Spin Systems (S4) was held at Coolfont Resort and Health Spa. located near Berkley Springs West Virginia on May 20-23. 1991. There were over sixty attendees. approximately half from the United States. the remainder representing over twelve different countries. The international character of the workshop may be gleaned form the attendee list, included in this volume. The intent of the workshop was to bring together those experimentalists and theoreticians whose efforts have resulted in significant recent contributions to the development and use of the ac susceptibility technique as well as to the interpretation of data obtained from these measurements. Many spirited discussions occurred during and after the presentations. These are reflected in the manuscripts contained in these proceedings. Although camera ready manuscripts were required from all participants at registration, all manuscripts were revised and reflect the lively exchanges that followed each presentation. The small size of the workshop allowed the participants a high degree of flexibility. Consequently when a controversial topic such as "the irreversibility line" emerged, a special session was organized on the spot. At the suggestion of Ron Goldfarb, participants were invited to contribute a one page summary containing their thoughts on the topic. These stand alone contributions were retyped and included as submitted, with only minor editorial changes. These proceedings are intended for those experienced scientists new to the field and graduate students just beginning their research.

Author : K.H.J. Buschow
Publisher : Elsevier
Page : 1361 pages
File Size : 23,10 MB
Release : 2005-12-28
Category : Technology & Engineering
ISBN : 0080457657

GET BOOK

Magnetic and superconducting materials pervade every avenue of the technological world – from microelectronics and mass-data storage to medicine and heavy engineering. Both areas have experienced a recent revitalisation of interest due to the discovery of new materials, and the re-evaluation of a wide range of basic mechanisms and phenomena. This Concise Encyclopedia draws its material from the award-winning Encyclopedia of Materials and Engineering, and includes updates and revisions not available in the original set -- making it the ideal reference companion for materials scientists and engineers with an interest in magnetic and superconducting materials. Contains in excess of 130 articles, taken from the award-winning Encyclopedia of Materials: Science and Technology, including ScienceDirect updates not available in the original set Each article discusses one aspect of magnetic and superconducting materials and includes photographs, line drawings and tables to aid the understanding of the topic at hand Cross-referencing guides readers to articles covering subjects of related interest

Author : R.G. Sharma
Publisher : Springer
Page : 427 pages
File Size : 48,56 MB
Release : 2015-02-26
Category : Technology & Engineering
ISBN : 3319137131

GET BOOK

This book presents the basics and applications of superconducting magnets. It explains the phenomenon of superconductivity, theories of superconductivity, type II superconductors and high-temperature cuprate superconductors. The main focus of the book is on the application to superconducting magnets to accelerators and fusion reactors and other applications of superconducting magnets. The thermal and electromagnetic stability criteria of the conductors and the present status of the fabrication techniques for future magnet applications are addressed. The book is based on the long experience of the author in studying superconducting materials, building magnets and numerous lectures delivered to scholars. A researcher and graduate student will enjoy reading the book to learn various aspects of magnet applications of superconductivity. The book provides the knowledge in the field of applied superconductivity in a comprehensive way.

Author : Teruo Matsushita
Publisher : Springer Nature
Page : 207 pages
File Size : 37,92 MB
Release : 2021-03-27
Category : Technology & Engineering
ISBN : 3030675688

GET BOOK

This book introduces readers to the characteristic features of electromagnetic phenomena in superconductivity. It first demonstrates not only that the diamagnetism in the superconductivity complies with Maxwell’s theory, which was formulated before the discovery of superconductivity, but also that the dominant E-B analogy in the electromagnetism loses perfection without the superconductivity. The book then explores flux pinning, which is responsible for the non-dissipative current in DC, leading to irreversibility in AC. Drawing on Maxwell’s work, it also proves theoretically that if there is no energy dissipation in the superconductivity caused by the break in time reversal symmetry, it contradicts the thermodynamic principle of energy conservation – something that had previously only been proved experimentally. Lastly, the book addresses the longitudinal magnetic field effect, and explains how this phenomenon leads to a new development of Maxwell’s theory. Featuring numerous appendices to help readers understand the methods of derivation of equations, this book offers students and young scientists an introduction to applied superconductivity, especially in the context of power applications. Presenting the characteristic features of electromagnetic phenomena in superconductivity from basic to advanced topics for applications, the book offers a valuable resource for graduate students and researchers studying superconductivity as well as engineers working in electric utility industry.

Author : H. Brechna
Publisher : Springer
Page : 0 pages
File Size : 40,95 MB
Release : 2011-12-15
Category : Technology & Engineering
ISBN : 9783642807237

GET BOOK

The renaissance of magnet technology started in the early 1950s with the establishment of high-energy accelerators. About a decade later in 1961, or fifty years after the discovery of superconductivity, high-field superconducting laboratory magnets became a reality. Conventional still the major beam-handling and experimen electromagnets, which are tal devices used in laboratories, operate at zero efficiency. To generate high magnetic fields in a useful volume, considerable amounts of power are needed. Superconducting d. c. magnets do not require any power at all. It is somewhat depressing to note that, sixty years after the first superconductor was tested, the experimental d. c. superconducting mag net is still the only large-scale equipment operated in laboratories. Al though there has been considerable activity in the area of superconduc tivity, superconductors are used on quite a modest scale in electronic and quantum devices, in medicine and biology, and in physical experi ments where high magnetic fields are essential. It is only recently that Type II superconductors have been introduced in power engineering (power generation, storage and transport) to replace pulsed accelerator magnets; for fast and economical transportation vehicles (levitated trains) where superconductors may ultimately replace the wheel; to make new means of en~rgy generation economically feasible, such as in magneto hydrodynamics and in fusion reactors; and for high-efficiency electric motors. High-field superconducting magnets are being proposed for de salination of seawater, for magnetic separation in the mining industry, for cleaning polluted water, and for sewage treatment.

Author : Richard A Dunlap
Publisher : Morgan & Claypool Publishers
Page : 114 pages
File Size : 10,12 MB
Release : 2019-10-24
Category : Science
ISBN : 1643276905

GET BOOK

The transport of electric charge through most materials is well described in terms of their electronic band structure. The present book deals with two cases where the charge transport in a solid is not described by the simple band structure picture of the solid. These cases are related to the phenomena of the quantum Hall effect and superconductivity. Part I of this book deals with the quantum Hall effect, which is a consequence of the behavior of electrons in solids when they are constrained to move in two dimensions. Part II of the present volume describes the behavior of superconductors, where electrons are bound together in Cooper pairs and travel through a material without resistance.

Author : Beate Lehndorff
Publisher : Springer
Page : 204 pages
File Size : 27,20 MB
Release : 2003-07-01
Category : Technology & Engineering
ISBN : 3540409831

GET BOOK

Since the discovery of high temperature superconductors the scientific com nmnity has been very active in research on material and system development as well as on the basic understanding of the mechanism of superconductiv ity at high transition temperatures. Industrial groups joined in very soon as with these new materials the prospects for commercial application of super conductivity seemed to be more promising than ever. Materials processing was divided into film deposition and bulk preparation techniques, the latter including conductor fabrication and melt growth of monolithic samples as well. Because of the high impact of possible applications in energy technol ogy, wire and tape fabrication of the BSCCO superconductors is one of the most important fields, in addition to thin film technology for mobile comuni cation. Only since processes like IBAD and RABiTS TM were invented have film deposition techniques also become important for energy technology. In order to produce suitable conductors with material properties which meet the challenge imposed by energy technology, detailed understanding of the phase formation and physical properties of the high temperature super conductors is necessary. The goal of this book is on one hand to provide the basic information on phase formation and physical properties, and to give a short overview of the state of the art in conductor preparation and character ization. On the other hand it contains the author's own results in the field of preparation and characterization.

Author : Karl-hubert Mess
Publisher : World Scientific
Page : 230 pages
File Size : 50,14 MB
Release : 1996-08-30
Category : Science
ISBN : 9814498440

GET BOOK

The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.