[PDF] Introduction To Marine Control Systems eBook

Author : Karl Dietrich von Ellenrieder
Publisher : Springer Nature
Page : 540 pages
File Size : 14,85 MB
Release : 2021-06-21
Category : Technology & Engineering
ISBN : 3030750213

GET BOOK

This textbook offers a comprehensive introduction to the control of marine vehicles, from fundamental to advanced concepts, including robust control techniques for handling model uncertainty, environmental disturbances, and actuator limitations. Starting with an introductory chapter that extensively reviews automatic control and dynamic modeling techniques for ocean vehicles, the first part of the book presents in-depth information on the analysis and control of linear time invariant systems. The concepts discussed are developed progressively, providing a basis for understanding more complex techniques and stimulating readers’ intuition. In addition, selected examples illustrating the main concepts, the corresponding MATLAB® code, and problems are included in each chapter. In turn, the second part of the book offers comprehensive coverage on the stability and control of nonlinear systems. Following the same intuitive approach, it guides readers from the fundamentals to more advanced techniques, which culminate in integrator backstepping, adaptive and sliding mode control. Leveraging the author’s considerable teaching and research experience, the book offers a good balance of theory and stimulating questions. Not only does it provide a valuable resource for undergraduate and graduate students; it will also benefit practitioners who want to review the foundational concepts underpinning some of the latest advanced marine vehicle control techniques, for use in their own applications.

Author : Thor I. Fossen
Publisher : John Wiley & Sons
Page : 96 pages
File Size : 43,47 MB
Release : 2021-04-16
Category : Science
ISBN : 1119575036

GET BOOK

Handbook of MARINE CRAFT HYDRODYNAMICS AND MOTION CONTROL The latest tools for analysis and design of advanced GNC systems Handbook of Marine Craft Hydrodynamics and Motion Control is an extensive study of the latest research in hydrodynamics, guidance, navigation, and control systems for marine craft. The text establishes how the implementation of mathematical models and modern control theory can be used for simulation and verification of control systems, decision-support systems, and situational awareness systems. Coverage includes hydrodynamic models for marine craft, models for wind, waves and ocean currents, dynamics and stability of marine craft, advanced guidance principles, sensor fusion, and inertial navigation. This important book includes the latest tools for analysis and design of advanced GNC systems and presents new material on unmanned underwater vehicles, surface craft, and autonomous vehicles. References and examples are included to enable engineers to analyze existing projects before making their own designs, as well as MATLAB scripts for hands-on software development and testing. Highlights of this Second Edition include: Topical case studies and worked examples demonstrating how you can apply modeling and control design techniques to your own designs A Github repository with MATLAB scripts (MSS toolbox) compatible with the latest software releases from Mathworks New content on mathematical modeling, including models for ships and underwater vehicles, hydrostatics, and control forces and moments New methods for guidance and navigation, including line-of-sight (LOS) guidance laws for path following, sensory systems, model-based navigation systems, and inertial navigation systems This fully revised Second Edition includes innovative research in hydrodynamics and GNC systems for marine craft, from ships to autonomous vehicles operating on the surface and under water. Handbook of Marine Craft Hydrodynamics and Motion Control is a must-have for students and engineers working with unmanned systems, field robots, autonomous vehicles, and ships. MSS toolbox: https://github.com/cybergalactic/mss Lecture notes: https://www.fossen.biz/wiley Author’s home page: https://www.fossen.biz

Author : D.A. Taylor
Publisher : Elsevier
Page : 433 pages
File Size : 36,86 MB
Release : 2013-10-22
Category : Technology & Engineering
ISBN : 1483101975

GET BOOK

Marine Engineering Series: Marine Control Practice deals with the instrumentation and its associated control systems that are found onboard ships. The book covers topics such as the measuring instruments and control signals for different parameters; system analysis; process and kinetic control systems; and commercially available equipment. Also covered in the book are correcting units such as actuators and valves; the control systems for boilers, turbines, auxiliary equipment; and control involving computers. The text is recommended for those who need to complete the Certificates of Competency for Marine Engineers, including Extra First Class. The book will also be beneficial to offshore engineers.

Author : Khac Duc Do
Publisher : Springer Science & Business Media
Page : 402 pages
File Size : 50,18 MB
Release : 2009-08-09
Category : Technology & Engineering
ISBN : 184882730X

GET BOOK

Most ocean vessels are underactuated but control of their motion in the real ocean environment is essential. Starting with a review of the background on ocean-vessel dynamics and nonlinear control theory, the authors’ systematic approach is based on various nontrivial coordinate transformations coupled with advanced nonlinear control design methods. This strategy is then used for the development and analysis of a number of ocean-vessel control systems with the aim of achieving advanced motion control tasks including stabilization, trajectory-tracking, path-tracking and path-following. Control of Ships and Underwater Vehicles offers the reader: - new results in the nonlinear control of underactuated ocean vessels; - efficient designs for the implementation of controllers on underactuated ocean vessels; - numerical simulations and real-time implementations of the control systems designed on a scale-model ship for each controller developed to illustrate their effectiveness and afford practical guidance.

Author : Yuriy P. Kondratenko
Publisher : CRC Press
Page : 476 pages
File Size : 16,28 MB
Release : 2022-09-01
Category : Technology & Engineering
ISBN : 1000794067

GET BOOK

Advanced Control Systems: Theory and Applications provides an overview of advanced research lines in control systems as well as in design, development and implementation methodologies for perspective control systems and their components in different areas of industrial and special applications. It consists of extended versions of the selected papers presented at the XXV International Conference on Automatic Control “Automatics 2018” (September 18-19, 2018, Lviv, Ukraine) which is the main Ukrainian Control Conference organized by Ukrainian Association on Automatic Control (National member organization of IFAC) and Lviv National University “Lvivska Politechnica”. More than 100 papers were presented at the conference with topics including: mathematical problems of control, optimization and game theory; control and identification under uncertainty; automated control of technical, technological and biotechnical objects; controlling the aerospace craft, marine vessels and other moving objects; intelligent control and information processing; mechatronics and robotics; information measuring technologies in automation; automation and IT training of personnel; the Internet of things and the latest technologies. The book is divided into two main parts, the first concerning theory (7 chapters) and the second concerning applications (7 chapters) of advanced control systems. The first part “Advances in Theoretical Research on Automatic Control” consists of theoretical research results which deal with descriptor control impulsive delay systems, motion control in condition of conflict, inverse dynamic models, invariant relations in optimal control, robust adaptive control, bio-inspired algorithms, optimization of fuzzy control systems, and extremal routing problem with constraints and complicated cost functions. The second part “Advances in Control Systems Applications” is based on the chapters which consider different aspects of practical implementation of advanced control systems, in particular, special cases in determining the spacecraft position and attitude using computer vision system, the spacecraft orientation by information from a system of stellar sensors, control synthesis of rotational and spatial spacecraft motion at approaching stage of docking, intelligent algorithms for the automation of complex biotechnical objects, an automatic control system for the slow pyrolysis of organic substances with variable composition, simulation complex of hierarchical systems based on the foresight and cognitive modelling, and advanced identification of impulse processes in cognitive maps. The chapters have been structured to provide an easy-to-follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area. This book may be useful for researchers and students who are interesting in advanced control systems.

Author : D A Taylor
Publisher : Elsevier
Page : 380 pages
File Size : 47,49 MB
Release : 2014-05-20
Category : Technology & Engineering
ISBN : 1483142213

GET BOOK

Introduction to Marine Engineering explains the operation of all the ship's machinery, with emphasis on correct, safe operating procedures and practices at all times. Organized into 17 chapters, this book begins with an overall look at the ship. Subsequent chapters describe the various ship machineries, including diesel engines, steam turbines, boilers, feed systems, pumps, auxiliaries, deck machinery, hull equipment, shafting, propellers, steering gear, and electrical equipment. Other aspects of marine engineering, particularly, fuel oils, lubricating oils, refrigeration, air conditioning, ventilation, firefighting and safety, watchkeeping, and equipment operation, are also described. This book will be useful to anyone with an interest in ships' machinery or a professional involvement in the shipping business.

Author : Tony Roskilly
Publisher : Butterworth-Heinemann
Page : 189 pages
File Size : 41,61 MB
Release : 2015-04-06
Category : Technology & Engineering
ISBN : 0081000103

GET BOOK

Marine Systems Identification, Modeling and Control is a concise, stand-alone resource covering the theory and practice of dynamic systems and control for marine engineering students and professionals. Developed from a distance learning CPD course on marine control taught by the authors, the book presents the essentials of the subject, including system representation and transfer, feedback control and closed loop stability. Simulation code and worked examples are provided for both Scilab and MATLAB, making it suitable for both those without access to expensive software and those using MATLAB in a professional setting. This title considers the key topics without superfluous detail and is illustrated with marine industry examples. Concise and practical, covering the relevant theory without excessive detail Industry-specific examples and applications for marine engineering students and professionals Clearly presents key topics of the subject, including system representation and transfer, feedback control and closed loop stability, making it ideal for self-study or reference Simulation code and worked examples using Scilab and MATLAB provided on the book’s companion website