[PDF] Industry 40 China 2025 Iot eBook

Author : Wolfgang Babel
Publisher : Springer Nature
Page : 437 pages
File Size : 20,4 MB
Release : 2022-11-02
Category : Technology & Engineering
ISBN : 3658378522

GET BOOK

The book gives an overview about automation technology over the last 50 years, based on my own experiences. It is a good summery for automation since 1970 for all who want to know about the context of automation developments and their standards. It is a fundamental summery and enables the reader to get experience in the complex field of automation. In detail the question is arised, whether Industry 4.0, China 2025, IoT, AI are a revolution or more an evolution of timewise established availbale technologies in HW, SW and algorithms. Is the hype about Industry 4.0 justified or not? In that context a timelline since 1970 ist shown for AI, ANN, essential milestones in automation, e.g OSI-model, automation pyramid, standards for bus systems, main SW-languages, robots, AI, ANN, pattern recognittion, Ethernet, the 12 most important international field busses, their main features and characterisitcs, foundation of committees, harmonization and standardization efforts, OPC UA and cloud computing, field devices, PLCs, SCADA, MES, ERP and automation history. All that history is seen in the context of μ-controller, DSP (Digital signal processor), FPGAs (Field Programmable Gate Arrays), ASICs (Application-Specific Integrated Circuit) , Chip on Board. It is include the HW-history, from Intel 8080 to octuple multicore processors. In the same way it is shown the history of field device out from laboratory into the field with all difficulties and benefits of that transition. The issues are summerized in a pyramid of complexity. Requirements for robustness and safety are shown for field devices. In the same way it is shown the development of mainframes, workstations and PC’s. SAP a leading ERP System is explained in mor detail. Specially it is figured out how SAP works and what has to be considered in working with such kind of system. The differences between MES- and ERP-systems are discussed, specially also for future combined SAP/MES systems. Explained are the problems of middlesized companies (SMEs) in dealing with Industry 4.0 and automation. Further examples are given and discussed for automized quality control in automotvie, PCB-handling, CIGS (Solar cell)-production. Also shown is the upgrade for older products and make them ready for automation standards. In detail the history oft he modern robotics is shown for the automotive industry. In summery also is figured out the Industry 5.0 which is just coming up more and more.

Author : Deepa Jose
Publisher : CRC Press
Page : 419 pages
File Size : 48,89 MB
Release : 2024-07-30
Category : Computers
ISBN : 1040041159

GET BOOK

The purpose of this book is to discuss the trends and key drivers of Internet of Things (IoT) and artificial intelligence (AI) for automation in Industry 4.0. IoT and AI are transforming the industry thus accelerating efficiency and forging a more reliable automated enterprise. AI-driven IoT systems for Industry 4.0 explore current research to be carried out in the cutting-edge areas of AI for advanced analytics, integration of industrial IoT (IIoT) solutions and Edge components, automation in cyber-physical systems, world leading Industry 4.0 frameworks and adaptive supply chains, etc. A thorough exploration of Industry 4.0 is provided, focusing on the challenges of digital transformation and automation. It covers digital connectivity, sensors, and the integration of intelligent thinking and data science. Emphasizing the significance of AI, the chapter delves into optimal decision-making in Industry 4.0. It extensively examines automation and hybrid edge computing architecture, highlighting their applications. The narrative then shifts to IIoT and edge AI, exploring their convergence and the use of edge AI for visual insights in smart factories. The book concludes by discussing the role of AI in constructing digital twins, speeding up product development lifecycles, and offering insights for decision-making in smart factories. Throughout, the emphasis remains on the transformative impact of deep learning and AI in automating and accelerating manufacturing processes within the context of Industry 4.0. This book is intended for undergraduates, postgraduates, academicians, researchers, and industry professionals in industrial and computer engineering.

Author : Sergey Yurish
Publisher : Lulu.com
Page : 404 pages
File Size : 47,66 MB
Release : 2018-07-22
Category : Technology & Engineering
ISBN : 8409024489

GET BOOK

The first volume of the Advances in Robotics and Automatic Control: Reviews, Book Series started by IFSA Publishing in 2018 contains ten chapters written by 32 contributors from 9 countries: Belgium, China, Germany, India, Ireland, Japan, Serbia, Tunisia and USA. We hope that readers will enjoy this book and it can be a valuable tool for those who involved in research and development of various robots and automatic control systems.

Author : OECD
Publisher : OECD Publishing
Page : 130 pages
File Size : 21,39 MB
Release : 2023-10-13
Category :
ISBN : 9264865187

GET BOOK

This report explores the current state of Internet of Things (IoT) adoption and usage in OECD countries among businesses, households, and individuals. It analyzes IoT trends based on semiconductors, patents, venture capital investments, and firms. Additionally, it includes two case studies that examine the implementation of IoT in manufacturing and healthcare.

Author : Daniel Lynch
Publisher : Taylor & Francis
Page : 260 pages
File Size : 39,75 MB
Release : 2024-04-18
Category : Political Science
ISBN : 1040014127

GET BOOK

Written by a team of leading China specialists, this updated 2nd edition of Chinese Politics explores the dynamics of state power and politics in contemporary China, focusing on the Xi Jinping era. Through its multi-disciplinary contributions, this book explores the extent to which Xi has reshaped the political, economic, socio-cultural, and demographic terrains of the PRC, as well as Beijing’s foreign policy. The book will help readers to think productively about the trajectory of these aspects of Chinese politics and society through Xi’s current term and beyond. The book also highlights the potential role outside countries and non-state actors might play in shaping China’s trajectory as the PRC’s economic rise may be stalling. Through each exploration of these issues, the book addresses the central question of what The Xi Jinping Difference has been, and will likely continue to be, in Chinese politics. Key subjects covered in this new edition include: Law and the political system Socialization of youth The fate of the private sector Technology and digital authoritarianism The Belt and Road Initiative Population aging Chinese Politics continues to be an essential textbook for all students of contemporary China as well as scholars interested in the dynamics of political and social change.

Author : Amit Kumar Tyagi
Publisher : CRC Press
Page : 681 pages
File Size : 15,72 MB
Release : 2022-06-08
Category : Computers
ISBN : 1000565343

GET BOOK

This new volume discusses how integrating IoT devices and cyber-physical systems can help society by providing multiple efficient and affordable services to users. It covers the various applications of IoT-based cyber-physical systems, such as satellite imaging in relation to climate change, industrial control systems, e-healthcare applications, security uses, automotive and traffic monitoring and control, urban smart city planning, and more. The authors also outline the methods, tools, and algorithms for IoT-based cyber-physical systems and explore the integration of machine learning, blockchain, and Internet of Things-based cloud applications. With the continuous emerging new technologies and trends in IoT technology and CPS, this volume will be a helpful resource for scientists, researchers, industry professionals, faculty and students, and others who wish to keep abreast of new developments and new challenges for sustainable development in Industry 4.0.

Author : Kesheng Wang
Publisher : Springer
Page : 627 pages
File Size : 16,12 MB
Release : 2018-02-10
Category : Technology & Engineering
ISBN : 9811057680

GET BOOK

The proceedings brings together a selection of papers from the 7th International Workshop of Advanced Manufacturing and Automation (IWAMA 2017), held in Changshu Institute of Technology, Changshu, China on September 11–12, 2017. Most of the topics are focusing on novel techniques for manufacturing and automation in Industry 4.0. These contributions are vital for maintaining and improving economic development and quality of life. The proceeding will assist academic researchers and industrial engineers to implement the concepts and theories of Industry 4.0 in industrial practice, in order to effectively respond to the challenges posed by the 4th industrial revolution and smart factories.

Author : Ahmad Hoirul Basori
Publisher : BoD – Books on Demand
Page : 156 pages
File Size : 13,22 MB
Release : 2020-03-25
Category : Technology & Engineering
ISBN : 1789854830

GET BOOK

Nowadays, our expectations of robots have been significantly increases. The robot, which was initially only doing simple jobs, is now expected to be smarter and more dynamic. People want a robot that resembles a human (humanoid) has and has emotional intelligence that can perform action-reaction interactions. This book consists of two sections. The first section focuses on emotional intelligence, while the second section discusses the control of robotics. The contents of the book reveal the outcomes of research conducted by scholars in robotics fields to accommodate needs of society and industry.

Author : Anna Visvizi
Publisher : Springer Nature
Page : 677 pages
File Size : 44,30 MB
Release : 2021-02-11
Category : Education
ISBN : 3030620662

GET BOOK

This book features research presented and discussed during the Research & Innovation Forum (Rii Forum) 2020. As such, this book offers a unique insight into emerging topics, issues and developments pertinent to the fields of technology, innovation and education and their social impact. Papers included in this book apply inter- and multi-disciplinary approaches to query such issues as technology-enhanced teaching and learning, smart cities, information systems, cognitive computing and social networking. What brings these threads of the discussion together is the question of how advances in computer science – which are otherwise largely incomprehensible to researchers from other fields – can be effectively translated and capitalized on so as to make them beneficial for society as a whole. In this context, Rii Forum and Rii Forum proceedings offer an essential venue where diverse stakeholders, including academics, the think tank sector and decision-makers, can engage in a meaningful dialogue with a view to improving the applicability of advances in computer science.

Author : Carlos Toro
Publisher : Springer Nature
Page : 418 pages
File Size : 19,94 MB
Release : 2021-04-03
Category : Technology & Engineering
ISBN : 3030672700

GET BOOK

This book relates research being implemented in three main research areas: secure connectivity and intelligent systems, real-time analytics and manufacturing knowledge and virtual manufacturing. Manufacturing SMEs and MNCs want to see how Industry 4.0 is implemented. On the other hand, groundbreaking research on this topic is constantly growing. For the aforesaid reason, the Singapore Agency for Science, Technology and Research (A*STAR), has created the model factory initiative. In the model factory, manufacturers, technology providers and the broader industry can (i) learn how I4.0 technologies are implemented on real-world manufacturing use-cases, (ii) test process improvements enabled by such technologies at the model factory facility, without disrupting their own operations, (iii) co-develop technology solutions and (iv) support the adoption of solutions at their everyday industrial operation. The book constitutes a clear base ground not only for inspiration of researchers, but also for companies who will want to adopt smart manufacturing approaches coming from Industry 4.0 in their pathway to digitization.