High Speed Diode Lasers Book in PDF, ePub and Kindle version is available to download in english. Read online anytime anywhere directly from your device. Click on the download button below to get a free pdf file of High Speed Diode Lasers book. This book definitely worth reading, it is an incredibly well-written.
This book is composed of seven invited papers which present the current status of high speed diode lasers. Fast carrier and photon dynamics in directly modulated MQW lasers is analyzed and novel design approaches are considered which were critical for the demonstration and record of 40 GHz modulation bandwidth. Attention is centered on the challenges in creation of high speed and low chirp single mode DFB lasers. Recent progress in mode-locked diode lasers is covered, specifically by the examples of 160 fs pulse generation and appearance of microwave pulse repetition rates. Future trends in increasing of high speed laser performance are also examined.
This book summarizes a five year research project, as well as subsequent results regarding high power diode laser systems and their application in materials processing. The text explores the entire chain of technology, from the semiconductor technology, through cooling mounting and assembly, beam shaping and system technology, to applications in the processing of such materials as metals and polymers. Includes theoretical models, a range of important parameters and practical tips.
Starting from the basics of semiconductor lasers with emphasis on the generation of high optical output power the reader is introduced in a tutorial way to all key technologies required to fabricate high-power diode-laser sources. Various applications are exemplified.
This timely book combines theory, applications, and projections on ultrafast diode lasers (UDL). A comprehensive treatment of UDLs from basic physical principles to applications in optical fiber communications and ultrafast electronics.
Advances in High-Power Fiber and Diode Laser Engineering provides an overview of recent research trends in fiber and diode lasers and laser systems engineering. In recent years, many new fiber designs and fiber laser system strategies have emerged, targeting the mitigation of different problems which occur when standard optical fibers are used for making high-power lasers. Simultaneously, a lot of attention has been put to increasing the brightness and the output power of laser diodes. Both of these major laser development directions continue to advance at a rapid pace with the sole purpose of achieving higher power while having excellent beam quality. The book begins by introducing the principles of diode lasers and methods for improving their brightness. Later chapters cover quantum cascade lasers, diode pumped high power lasers, high average power LMA fiber amplifiers, high-power fiber lasers, beam combinable kilowatt all-fiber amplifiers, and applications of 2 μm thulium fiber lasers and high-power GHz linewidth diode lasers. Written by a team of authors with experience in academia and industrial research and development, and brought together by an expert editor, this book will be of use to anyone interested in laser systems development at the laboratory or commercial scale.
A huge number of applications require coherent radiation in the visible spectral range. Since diode lasers are very compact and efficient light sources, there exists a great interest to cover these applications with diode laser emission. Despite modern band gap engineering not all wavelengths can be accessed with diode laser radiation. Especially in the visible spectral range between 480 nm and 630 nm no emission from diode lasers is available, yet. Nonlinear frequency conversion of near-infrared radiation is a common way to generate coherent emission in the visible spectral range. However, radiation with extraordinary spatial temporal and spectral quality is required to pump frequency conversion. Broad area (BA) diode lasers are reliable high power light sources in the near-infrared spectral range. They belong to the most efficient coherent light sources with electro-optical efficiencies of more than 70%. Standard BA lasers are not suitable as pump lasers for frequency conversion because of their poor beam quality and spectral properties. For this purpose, tapered lasers and diode lasers with Bragg gratings are utilized. However, these new diode laser structures demand for additional manufacturing and assembling steps that makes their processing challenging and expensive. An alternative to BA diode lasers is the stripe-array architecture. The emitting area of a stripe-array diode laser is comparable to a BA device and the manufacturing of these arrays requires only one additional process step. Such a stripe-array consists of several narrow striped emitters realized with close proximity. Due to the overlap of the fields of neighboring emitters or the presence of leaky waves, a strong coupling between the emitters exists. As a consequence, the emission of such an array is characterized by a so called supermode. However, for the free running stripe-array mode competition between several supermodes occurs because of the lack of wavelength stabilization. This leads to power fluctuations, spectral instabilities and poor beam quality. Thus, it was necessary to study the emission properties of those stripe-arrays to find new concepts to realize an external synchronization of the emitters. The aim was to achieve stable longitudinal and transversal single mode operation with high output powers giving a brightness sufficient for efficient nonlinear frequency conversion. For this purpose a comprehensive analysis of the stripe-array devices was done here. The physical effects that are the origin of the emission characteristics were investigated theoretically and experimentally. In this context numerical models could be verified and extended. A good agreement between simulation and experiment was observed. One way to stabilize a specific supermode of an array is to operate it in an external cavity. Based on mathematical simulations and experimental work, it was possible to design novel external cavities to select a specific supermode and stabilize all emitters of the array at the same wavelength. This resulted in stable emission with 1 W output power, a narrow bandwidth in the range of 2 MHz and a very good beam quality with M²<1.5. This is a new level of brightness and brilliance compared to other BA and stripe-array diode laser systems. The emission from this external cavity diode laser (ECDL) satisfied the requirements for nonlinear frequency conversion. Furthermore, a huge improvement to existing concepts was made. In the next step newly available periodically poled crystals were used for second harmonic generation (SHG) in single pass setups. With the stripe-array ECDL as pump source, more than 140 mW of coherent radiation at 488 nm could be generated with a very high opto-optical conversion efficiency. The generated blue light had very good transversal and longitudinal properties and could be used to generate biphotons by parametric down-conversion. This was feasible because of the improvement made with the infrared stripe-array diode lasers due to the development of new physical concepts.
This work presents progress in the root-cause analysis of power saturation mechanisms in continuous wave (CW) driven GaAs-based high-power broad area diode lasers operated at 935 nm. Target is to increase efficiency at high optical CW powers by epitaxial design. The novel extreme triple asymmetric (ETAS) design was developed and patented within this work to equip diode lasers that use an extremely thin p-waveguide with a high modal gain. An iterative variation of diode lasers employing ETAS designs was used to experimentally clarify the impact of modal gain on the temperature dependence of internal differential quantum efficiency (IDQE) and optical loss. High modal gain leads to increased free carrier absorption from the active region. However, less power saturation is observed, which must then be attributed to an improved temperature sensitivity of the IDQE. The effect of longitudinal spatial hole burning (LSHB) leads to above average non-linear carrier loss at the back facet of the device. At high CW currents the junction temperature rises. Therefore, not only the asymmetry of the carrier profile increases but also the average carrier density in order to compensate for the decreased material gain and increased threshold gain. This carrier non-pinning effect above threshold is found in this work to enhance the impact of LSHB already at low currents, leading to rapid degradation of IDQE with temperature. This finding puts LSHB into a new context for CW-driven devices as it emphasizes the importance of low carrier densities at threshold. The carrier density was effectively reduced by applying the novel ETAS design. This enabled diode lasers to be realized that show minimized degradation of IDQE with temperature and therefore improved performance in CW operation.
This book covers the device physics of semiconductor lasers in five chapters written by recognized experts in this field. The volume begins by introducing the basic mechanisms of optical gain in semiconductors and the role of quantum confinement in modern quantum well diode lasers. Subsequent chapters treat the effects of built-in strain, one of the important recent advances in the technology of these lasers, and the physical mechanisms underlying the dynamics and high speed modulation of these devices. The book concludes with chapters addressing the control of photon states in squeezed-light and microcavity structures, and electron states in low dimensional quantum wire and quantum dot lasers. The book offers useful information for both readers unfamiliar with semiconductor lasers, through the introductory parts of each chapter, as well as a state-of-the-art discussion of some of the most advanced semiconductor laser structures, intended for readers engaged in research in this field. This book may also serve as an introduction for the companion volume, Semiconductor Lasers II: Materials and Structures, which presents further details on the different material systems and laser structures used for achieving specific diode laser performance features. Introduces the reader to the basics of semiconductor lasers Covers the fundamentals of lasing in semiconductors, including quantum confined and microcavity structures Beneficial to readers interested in the more general aspects of semiconductor physics and optoelectronic devices, such as quantum confined heterostructures and integrated optics Each chapter contains a thorough introduction to the topic geared toward the non-expert, followed by an in-depth discussion of current technology and future trends Useful for professionals engaged in research and development Contains numerous schematic and data-containing illustrations
The compact size, reliability, and low cost of diode lasers lead to applications throughout modern technology-most importantly in modern optical telecommunication systems. This book presents a comprehensive introduction to the principles and operation of diode lasers. It begins with a review of semiconductor physics and laser fundamentals, before describing the most basic homojunction laser. Later chapters describe more advanced laser types and their applications, including the most recently developed and exotic laser designs. The author's intuitive style, coupled with an extensive set of worked examples and sample problems, make this an outstanding introduction to the subject.