[PDF] Geotechnical Site Characterization eBook

Author : Anirban De
Publisher : Momentum Press
Page : 183 pages
File Size : 46,77 MB
Release : 2016-03-02
Category : Technology & Engineering
ISBN : 1606505335

GET BOOK

The topic of site characterization is unique to geotechnical engineering and owes its significance directly to the variability of the natural geologic deposits on the earth’s surface. Proper site characterization requires an understanding of various field and laboratory investigation methods. The book discusses the suitability of various methods under different site conditions and presents the procedures to derive design parameters based on interpretation of test results. Recent developments in specialized site characterization methods (such as seismic hazard evaluation) are also included. Three recent case histories are presented, where site characterization played a key role. The three disparate cases include soft natural soil under static loading, coarse and fine-grained soil under seismic impact, and hazardous waste deposits under both static and seismic loading. Site investigation requirements of building codes are discussed and guidelines for preparing a typical site characterization report are presented. The book is aimed at the practicing geotechnical engineer, as well as advanced undergraduate and graduate students.

Author : Paul W. Mayne
Publisher :
Page : 266 pages
File Size : 19,37 MB
Release : 2000
Category : Technology & Engineering
ISBN :

GET BOOK

GSP 97 contains 17 papers on in situ geotechnical testing presented at sessions of Geo-Denver 2000, held in Denver, Colorado, August 5-8, 2000.

Author : Jonathan David Istok
Publisher : Springer Science & Business Media
Page : 93 pages
File Size : 48,47 MB
Release : 2012-09-18
Category : Science
ISBN : 3642139191

GET BOOK

The push-pull test is a powerful site characterization technique that has been applied to a wide range of problems in contaminant hydrogeology. The theoretical and practical apsects of push-pull testing were initially developed to characterize groundwater acquifers but the method has now been extended to saturated and unsaturated soils and sediments as well as to surface water bodies. Dr. Istok and his collaborators have been instrumental in the development of these techniques and he is widely recognized as the world's leading expert push-pull testing. This is the only reference book available on this powerful method.

Author : C. N. V. Satyanarayana Reddy
Publisher : Springer Nature
Page : 819 pages
File Size : 26,15 MB
Release : 2021-09-26
Category : Science
ISBN : 9811633835

GET BOOK

This book comprises the select proceedings of the Indian Geotechnical Conference (IGC) 2020. The contents focus on recent developments in geotechnical engineering for a sustainable tomorrow. The book covers the topics related to traditional and latest methods in characterisation of ground at construction sites, recent technological developments/ advances in design of shallow and deep foundations in different subsoil conditions.

Author : P. J. Sabatini
Publisher :
Page : 392 pages
File Size : 19,23 MB
Release : 2004-10-01
Category : Technology & Engineering
ISBN : 9781410217615

GET BOOK

This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.

Author : An-Bin Huang
Publisher : CRC Press
Page : 260 pages
File Size : 42,4 MB
Release : 2008-04-04
Category : Science
ISBN : 0203883195

GET BOOK

Geotechnical and Geophysical Site Characterization collects the papers presented at the Third International Conference on Site Characterization (ISC 3) that took place in Taipei from April 1-4, 2008. The subjects covered include new developments in mechanical in-situ testing and interpretation techniques, statistical analysis of test data, geo

Author : Sebastiano Foti
Publisher : CRC Press
Page : 492 pages
File Size : 44,43 MB
Release : 2014-08-21
Category : Technology & Engineering
ISBN : 0415678765

GET BOOK

Develop a Greater Understanding of How and Why Surface Wave Testing Works Using examples and case studies directly drawn from the authors’ experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents the key facets associated with surface wave testing for near-surface site characterization. It clearly outlines the basic principles, the theoretical framework and the practical implementation of surface wave analysis. In addition, it also describes in detail the equipment and measuring devices, acquisition techniques, signal processing, forward and inverse modeling theories, and testing protocols that form the basis of modern surface wave techniques. Review Examples of Typical Applications for This Geophysical Technique Divided into eight chapters, the book explains surface wave testing principles from data measurement to interpretation. It effectively integrates several examples and case studies illustrating how different ground conditions and geological settings may influence the interpretation of data measurements. The authors accurately describe each phase of testing in addition to the guidelines for correctly performing and interpreting results. They present variants of the test within a consistent framework to facilitate comparisons, and include an in-depth discussion of the uncertainties arising at each stage of surface wave testing. Provides a comprehensive and in-depth treatment of all the steps involved in surface wave testing Discusses surface wave methods and their applications in various geotechnical conditions and geological settings Explains how surface wave measurements can be used to estimate both stiffness and dissipative properties of the ground Addresses the issue of uncertainty, which is often an overlooked problem in surface wave testing Includes examples with comparative analysis using different processing techniques and inversion algorithms Outlines advanced applications of surface wave testing such as joint inversion, underwater investigation, and Love wave analysis Written for geotechnical engineers, engineering seismologists, geophysicists, and researchers, Surface Wave Methods for Near-Surface Site Characterization offers practical guidance, and presents a thorough understanding of the basic concepts.

Author : Pijush Samui
Publisher : Academic Press
Page : 518 pages
File Size : 19,44 MB
Release : 2020-12-01
Category : Technology & Engineering
ISBN : 0128218525

GET BOOK

Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering Includes case studies to help readers apply the methods described in their own work

Author : Roberto Quental Coutinho
Publisher : CRC Press
Page : 1888 pages
File Size : 24,11 MB
Release : 2012-09-06
Category : Science
ISBN : 1466584181

GET BOOK

Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.