[PDF] Emc Of Analog Integrated Circuits eBook

Author : Jean-Michel Redouté
Publisher : Springer Science & Business Media
Page : 249 pages
File Size : 30,58 MB
Release : 2009-10-10
Category : Technology & Engineering
ISBN : 9048132304

GET BOOK

Environmental electromagnetic pollution has drastically increased over the last decades. The omnipresence of communication systems, various electronic appliances and the use of ever increasing frequencies, all contribute to a noisy electromagnetic environment which acts detrimentally on sensitive electronic equipment. Integrated circuits must be able to operate satisfactorily while cohabiting harmoniously in the same appliance, and not generate intolerable levels of electromagnetic emission, while maintaining a sound immunity to potential electromagnetic disturbances: analog integrated circuits are in particular more easily disturbed than their digital counterparts, since they don't have the benefit of dealing with predefined levels ensuring an innate immunity to disturbances. The objective of the research domain presented in EMC of Analog Integrated Circuits is to improve the electromagnetic immunity of considered analog integrated circuits, so that they start to fail at relevantly higher conduction levels than before.

Author : Jean-Michel Redouté
Publisher :
Page : 0 pages
File Size : 42,75 MB
Release : 2010
Category : Science
ISBN : 9781282837201

GET BOOK

Presents the results of research to improve the electromagnetic immunity of considered analog integrated circuits so that they start to fail at relevantly higher conduction levels.

Author : Donald O. Pederson
Publisher : Springer Science & Business Media
Page : 577 pages
File Size : 16,23 MB
Release : 2013-04-17
Category : Technology & Engineering
ISBN : 1475721285

GET BOOK

This book deals with the analysis and design of analog integrated circuits that form the basis of present-day communication systems. The material is intended to be a textbook for class use but should also be a valuable source of information for a practicing engineer. Both bipolar and MOS transistor circuits are analyzed and many numerical examples are used to illustrate the analysis and design techniques developed in this book. A set of problems is presented at the end of the book which covers the subject matter of the whole book. The book has originated out of a senior-level course on nonlinear, analog integrated circuits at the University of California at Berkeley. The material contained in this book has been taught by the first author for several years and the book has been class tested for six semesters. This along with feedback from the students is reflected in the organization and writing of the text. We expect that the students have had an introductory course in analog circuits so that they are familiar with some of the basic analysis techniques and also with the operating principles of the various semiconductor devices. Several important, basic circuits and concepts are reviewed as the subject matter is developed.

Author : Paul R. Gray
Publisher : John Wiley & Sons
Page : 981 pages
File Size : 38,35 MB
Release : 2024-02-21
Category : Technology & Engineering
ISBN : 1394220065

GET BOOK

ANALYSIS AND DESIGN OF ANALOG INTEGRATED CIRCUITS Authoritative and comprehensive textbook on the fundamentals of analog integrated circuits, with learning aids included throughout Written in an accessible style to ensure complex content can be appreciated by both students and professionals, this Sixth Edition of Analysis and Design of Analog Integrated Circuits is a highly comprehensive textbook on analog design, offering in-depth coverage of the fundamentals of circuits in a single volume. To aid in reader comprehension and retention, supplementary material includes end of chapter problems, plus a Solution Manual for instructors. In addition to the well-established concepts, this Sixth Edition introduces a new super-source follower circuit and its large-signal behavior, frequency response, stability, and noise properties. New material also introduces replica biasing, describes and analyzes two op amps with replica biasing, and provides coverage of weighted zero-value time constants as a method to estimate the location of dominant zeros, pole-zero doublets (including their effect on settling time and three examples of circuits that create doublets), the effect of feedback on pole-zero doublets, and MOS transistor noise performance (including a thorough treatment on thermally induced gate noise). Providing complete coverage of the subject, Analysis and Design of Analog Integrated Circuits serves as a valuable reference for readers from many different types of backgrounds, including senior undergraduates and first-year graduate students in electrical and computer engineering, along with analog integrated-circuit designers.

Author : David A Johns
Publisher : John Wiley & Sons
Page : 724 pages
File Size : 18,80 MB
Release : 2008-08
Category : Linear integrated circuits
ISBN : 9788126517787

GET BOOK

Market_Desc: Electrical Engineers Special Features: · Emphasizes fundamental principles in creating state-of-the-art analog circuits· Provides quantitative, as well as physical and intuitive, explanations of circuit analyses About The Book: This book presents a concise treatment of the wide array of knowledge required by an integrated circuit designer. It provides thorough coverage of the design and testing of high-performance analog circuits.

Author : Richard J. Higgins
Publisher : Prentice Hall
Page : 634 pages
File Size : 20,23 MB
Release : 1983
Category : Technology & Engineering
ISBN :

GET BOOK

This book is about using electronics without fear! This book includes both digital and analog integrated circuit instrumentation. Many microcomputer interfacing examples are given. --Preface (page xi-xii).

Author : Wouter A. Serdijn
Publisher : Springer Science & Business Media
Page : 117 pages
File Size : 30,49 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 1461522838

GET BOOK

Low-Voltage Low-Power Analog Integrated Circuits brings together in one place important contributions and state-of-the-art research results in this rapidly advancing area. Low-Voltage Low-Power Analog Integrated Circuits serves as an excellent reference, providing insight into some of the most important issues in the field.

Author : Paul R. Gray
Publisher : Wiley
Page : 822 pages
File Size : 27,88 MB
Release : 1993
Category : Technology & Engineering
ISBN : 9780471574958

GET BOOK

This edition combines the consideration of metal-oxide-semiconductors (MOS) and bipolar circuits into a unified treatment that also includes MOS-bipolar connections made possible by BiCMOS technology. Contains extensive use of SPICE, especially as an integral part of many examples in the problem sets as a more accurate check on hand calculations and as a tool to examine complex circuit behavior beyond the scope of hand analysis. Concerned largely with the design of integrated circuits, a considerable amount of material is also included on applications.

Author : Edwin W. Greeneich
Publisher : Springer Science & Business Media
Page : 349 pages
File Size : 33,6 MB
Release : 2012-12-06
Category : Computers
ISBN : 1461560330

GET BOOK

Analog Integrated Circuits deals with the design and analysis of modem analog circuits using integrated bipolar and field-effect transistor technologies. This book is suitable as a text for a one-semester course for senior level or first-year graduate students as well as a reference work for practicing engin eers. Advanced students will also find the text useful in that some of the material presented here is not covered in many first courses on analog circuits. Included in this is an extensive coverage of feedback amplifiers, current-mode circuits, and translinear circuits. Suitable background would be fundamental courses in electronic circuits and semiconductor devices. This book contains numerous examples, many of which include commercial analog circuits. End-of-chapter problems are given, many illustrating practical circuits. Chapter 1 discuses the models commonly used to represent devices used in modem analog integrated circuits. Presented are models for bipolar junction transistors, junction diodes, junction field-effect transistors, and metal-oxide semiconductor field-effect transistors. Both large-signal and small-signal models are developed as well as their implementation in the SPICE circuit simulation program. The basic building blocks used in a large variety of analog circuits are analyzed in Chapter 2; these consist of current sources, dc level-shift stages, single-transistor gain stages, two-transistor gain stages, and output stages. Both bipolar and field-effect transistor implementations are presented. Chapter 3 deals with operational amplifier circuits. The four basic op-amp circuits are analyzed: (1) voltage-feedback amplifiers, (2) current-feedback amplifiers, (3) current-differencing amplifiers, and (4) transconductance ampli fiers. Selected applications are also presented.

Author : Henry Chang
Publisher : Springer Science & Business Media
Page : 394 pages
File Size : 36,26 MB
Release : 1997
Category : Computers
ISBN : 9780792397946

GET BOOK

Analog circuit design is often the bottleneck when designing mixed analog-digital systems. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits presents a new methodology based on a top-down, constraint-driven design paradigm that provides a solution to this problem. This methodology has two principal advantages: (1) it provides a high probability for the first silicon which meets all specifications, and (2) it shortens the design cycle. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits is part of an ongoing research effort at the University of California at Berkeley in the Electrical Engineering and Computer Sciences Department. Many faculty and students, past and present, are working on this design methodology and its supporting tools. The principal goals are: (1) developing the design methodology, (2) developing and applying new tools, and (3) `proving' the methodology by undertaking `industrial strength' design examples. The work presented here is neither a beginning nor an end in the development of a complete top-down, constraint-driven design methodology, but rather a step in its development. This work is divided into three parts. Chapter 2 presents the design methodology along with foundation material. Chapters 3-8 describe supporting concepts for the methodology, from behavioral simulation and modeling to circuit module generators. Finally, Chapters 9-11 illustrate the methodology in detail by presenting the entire design cycle through three large-scale examples. These include the design of a current source D/A converter, a Sigma-Delta A/D converter, and a video driver system. Chapter 12 presents conclusions and current research topics. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits will be of interest to analog and mixed-signal designers as well as CAD tool developers.