[PDF] Efficiency Of A Gas Engine As Determined By Fuel Mixture And Compression eBook

Author : National Research Council
Publisher : National Academies Press
Page : 373 pages
File Size : 25,52 MB
Release : 2011-06-03
Category : Science
ISBN : 0309216389

GET BOOK

Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Author : National Research Council
Publisher : National Academies Press
Page : 812 pages
File Size : 42,81 MB
Release : 2015-09-28
Category : Science
ISBN : 0309373913

GET BOOK

The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Author : Gautam Kalghatgi
Publisher : Springer Nature
Page : 339 pages
File Size : 26,29 MB
Release : 2022-01-17
Category : Technology & Engineering
ISBN : 9811687358

GET BOOK

This book focuses on gasoline compression ignition (GCI) which offers the prospect of engines with high efficiency and low exhaust emissions at a lower cost. A GCI engine is a compression ignition (CI) engine which is run on gasoline-like fuels (even on low-octane gasoline), making it significantly easier to control particulates and NOx but with high efficiency. The state of the art development to make GCI combustion feasible on practical vehicles is highlighted, e.g., on overcoming problems on cold start, high-pressure rise rates at high loads, transients, and HC and CO emissions. This book will be a useful guide to those in academia and industry.

Author : J. C. Sanders
Publisher :
Page : 28 pages
File Size : 39,23 MB
Release : 1945
Category : Airplanes
ISBN :

GET BOOK

Small high-speed single-cylinder compression-ignition engines were tested to determine their performance characteristics under high supercharging. Calculations were made on the energy available in the exhaust gas of the compression-ignition engines. The maximum power at any given maximum cylinder pressure was obtained when the compression pressure was equal to the maximum cylinder pressure. Constant-pressure combustion was found possible at an engine speed of 2200 rpm. Exhaust pressures and temperatures were determined from an analysis of indicator cards. The analysis showed that, at rich mixtures with the exhaust back pressure equal to the inlet-air pressure, there is excess energy available for driving a turbine over that required for supercharging. The presence of this excess energy indicates that a highly supercharged compression-ignition engine might be desirable as a compressor and combustion chamber for a turbine.

Author : Raymond A. Lewis
Publisher :
Page : 62 pages
File Size : 48,3 MB
Release : 2013
Category :
ISBN :

GET BOOK

Gasoline - ethanol blends were explored as a strategy to mitigate engine knock, a phenomena in spark ignition engine combustion when a portion of the end gas is compressed to the point of spontaneous auto-ignition. This auto-ignition is dangerous to the operation of an internal combustion engine, as it can severely damage engine components. As engine designers are trying to improve the efficiency of the internal combustion engine, engine knock is a key limiting factor in engine design. Two methods have been used to limit engine knock that will be considered here; retarding the spark timing and addition of additives to reduce the tendency of the fuel mixture to knock. Both have drawbacks. Retarding spark reduces the engine efficiency and additives typically lower the heating value of the fuel, requiring more fuel for a given operating point. To study this problem a turbocharged engine was tested with a variety of combinations of gasoline and ethanol, an additive with very good anti-knock abilities. Pressure was recorded and GT Power simulations were used to determine the temperature within the cylinder. An effective octane number was calculated to measure the ability of the fuel to resist knock. Effective octane numbers varied from 91 for UTG91 to 111 for E25, respectively. Engine simulations were used to extrapolate to points that couldn't be tested in the experimental setup and generate performance maps which could be used to predict how the engine would act inside of a vehicle. It was found that increasing the compression ratio from 9.2 to 13.5 leads to a 7% relative increase in part load efficiency. When applied in a vehicle this leads to a 2-6% increase in miles per gallon of gasoline consumption depending on the drive cycle used. Miles per gallon of ethanol used were significantly higher than gasoline; 141 miles per gallon of ethanol was the lowest mileage over all cycles studied.

Author : Richard Stone
Publisher : Bloomsbury Publishing
Page : 516 pages
File Size : 10,46 MB
Release : 2017-09-16
Category : Technology & Engineering
ISBN : 1137028297

GET BOOK

Now in its fourth edition, this textbook remains the indispensable text to guide readers through automotive or mechanical engineering, both at university and beyond. Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth of worked examples and problems, its combination of theory and applied practice aids in the understanding of internal combustion engines, from thermodynamics and combustion to fluid mechanics and materials science. This textbook is aimed at third year undergraduate or postgraduate students on mechanical or automotive engineering degrees. New to this Edition: - Fully updated for changes in technology in this fast-moving area - New material on direct injection spark engines, supercharging and renewable fuels - Solutions manual online for lecturers