[PDF] Development Of Techniques For Manual Fillet Welding On Thick Plate Titanium Alloy eBook

Author : NAVAL APPLIED SCIENCE LAB BROOKLYN N Y.
Publisher :
Page : 16 pages
File Size : 34,8 MB
Release : 1963
Category :
ISBN :

GET BOOK

The results of this study indicate that techniques can be developed to produce uncontaminated double-beveled, fillet reinforced welded joints in thick plate alloy titanium using out-of-chamber, manual, all position shielded inertgas, consumable electrode, short circuit welding processes. Further development of these welding techniques is necessary to minimize or eliminate the occurrence of lack of fusion and cold shutting defects in the weldments. It is believed that improved welder skill and an increase in inductance in the power supply may help to overcome these difficulties. (Author).

Author : R. E. Monroe
Publisher :
Page : 26 pages
File Size : 30,23 MB
Release : 1965
Category : Titanium
ISBN :

GET BOOK

This memorandum represents a combined effort by the U.S. Naval Applied Science Laboratory, Brooklyn, New York, and the Defense Metals Information Center to summarize new information on welding thick Ti plate. Thick plate of Ti continues to be of interest to the aerospace and defense industries for possible use in submersibles, armored vehicles, large space boosters, high-speed aircraft, and for pressure vessels. This memorandum generally is limited to information on welding Ti plate that is (1) at least 1 in. thick and (2) that is not covered by DMIC Report 185, The Status and Properties of Titanium Alloys for Thick Plate, June 14, 1963. The general requirements for welding Ti are not repeated here, since they are well documented in references mentioned in the inroduction to the memorandum. Sections have been prepared to cover material developments, welding-process developments, weld properties, and residual welding stresses. (Author).

Author : NAVAL APPLIED SCIENCE LAB BROOKLYN N Y.
Publisher :
Page : 17 pages
File Size : 11,99 MB
Release : 1964
Category :
ISBN :

GET BOOK

Suitable out-of-chamber, manual and semi-automatic welding techniques have been developed for the fabrication of a titanium alloy pressure box of the type required for low cycle fatigue studies at the Marine Engineering Laboratory. These techniques may also be used for fabricating complex structural elements of heavy plate titanium. (Author).

Author :
Publisher :
Page : 108 pages
File Size : 31,36 MB
Release : 1966
Category : Titanium
ISBN :

GET BOOK

This memorandum reproduces thirteen lectures delivered at a Titanium Symposium held on March 28-29, 1966, at Hawthorne, California, under the auspices of the Norair Division of the Northrop Corporation. These lectures follow a logical sequence of topics including production aspects, metallurgy, manufacturing technology, and the design of titanium parts for aircraft and aerospace applications. (Author).