[PDF] Cmos Low Noise Amplifiers For Single And Multiband Applications A Comprehensive Design Approach eBook

Author : Norlaili Mohd Noh, Farshad Eshghabadi, Arjuna Marzuki
Publisher : Penerbit USM
Page : 481 pages
File Size : 12,96 MB
Release : 2023-10-11
Category : Technology & Engineering
ISBN : 9674617655

GET BOOK

This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

Author : Mladen Božanić
Publisher : Springer
Page : 344 pages
File Size : 32,95 MB
Release : 2017-11-30
Category : Technology & Engineering
ISBN : 3319690205

GET BOOK

This book is the first standalone book that combines research into low-noise amplifiers (LNAs) with research into millimeter-wave circuits. In compiling this book, the authors have set two research objectives. The first is to bring together the research context behind millimeter-wave circuit operation and the theory of low-noise amplification. The second is to present new research in this multi-disciplinary field by dividing the common LNA configurations and typical specifications into subsystems, which are then optimized separately to suggest improvements in the current state-of-the-art designs. To achieve the second research objective, the state-of-the-art LNA configurations are discussed and the weaknesses of state-of the art configurations are considered, thus identifying research gaps. Such research gaps, among others, point towards optimization – at a systems and microelectronics level. Optimization topics include the influence of short wavelength, layout and crosstalk on LNA performance. Advanced fabrication technologies used to decrease the parasitics of passive and active devices are also explored, together with packaging technologies such as silicon-on-chip and silicon-on-package, which are proposed as alternatives to traditional IC implementation. This research outcome builds through innovation. Innovative ideas for LNA construction are explored, and alternative design methodologies are deployed, including LNA/antenna co-design or utilization of the electronic design automation in the research flow. The book also offers the authors’ proposal for streamlined automated LNA design flow, which focuses on LNA as a collection of highly optimized subsystems.

Author : Zhong Yuan Chong
Publisher : Springer Science & Business Media
Page : 234 pages
File Size : 10,26 MB
Release : 1990-11-30
Category : Technology & Engineering
ISBN : 9780792390961

GET BOOK

Analog circuit design has grown in importance because so many circuits cannot be realized with digital techniques. Examples are receiver front-ends, particle detector circuits, etc. Actually, all circuits which require high precision, high speed and low power consumption need analog solutions. High precision also needs low noise. Much has been written already on low noise design and optimization for low noise. Very little is available however if the source is not resistive but capacitive or inductive as is the case with antennas or semiconductor detectors. This book provides design techniques for these types of optimization. This book is thus intended firstly for engineers on senior or graduate level who have already designed their first operational amplifiers and want to go further. It is especially for engineers who do not want just a circuit but the best circuit. Design techniques are given that lead to the best performance within a certain technology. Moreover, this is done for all important technologies such as bipolar, CMOS and BiCMOS. Secondly, this book is intended for engineers who want to understand what they are doing. The design techniques are intended to provide insight. In this way, the design techniques can easily be extended to other circuits as well. Also, the design techniques form a first step towards design automation. Thirdly, this book is intended for analog design engineers who want to become familiar with both bipolar and CMOS technologies and who want to learn more about which transistor to choose in BiCMOS.

Author : Tommy Tsang
Publisher :
Page : 206 pages
File Size : 18,19 MB
Release : 2002
Category :
ISBN :

GET BOOK

"A design strategy for optimizing RF passive components (e.g. inductors, capacitors, and varactors) beyond 5 GHz is presented." --

Author : Hector Solar Ruiz
Publisher : Springer Science & Business Media
Page : 191 pages
File Size : 29,56 MB
Release : 2013-09-14
Category : Technology & Engineering
ISBN : 1461486572

GET BOOK

The work establishes the design flow for the optimization of linear CMOS power amplifiers from the first steps of the design to the final IC implementation and tests. The authors also focuses on design guidelines of the inductor’s geometrical characteristics for power applications and covers their measurement and characterization. Additionally, a model is proposed which would facilitate designs in terms of transistor sizing, required inductor quality factors or minimum supply voltage. The model considers limitations that CMOS processes can impose on implementation. The book also provides different techniques and architectures that allow for optimization.

Author : Changgui Lin
Publisher : LAP Lambert Academic Publishing
Page : 184 pages
File Size : 19,12 MB
Release : 2010-04
Category :
ISBN : 9783838349046

GET BOOK

Design of RF CMOS Low Noise Amplifiers presents the results of research on a gain-boosted common-gate RF low noise amplifier (LNA) in CMOS technology. The book covers noise analysis, design techniques, prototyping of the LNA, as well as broadband modeling for on-chip spiral differential inductors. Beginning with a technical review of LNA architectures and inductor modeling techniques, the authors then introduce a scalable lumped circuit model for octagonal differential inductors. The effect of high frequency current crowding, i.e. proximity effect, is taken into consideration in the lumped circuit model. Subsequently, the book offers comprehensive noise analysis of the LNA and discusses design techniques for noise reduction. Measurement results for a 2.4GHz CMOS LNA and conclusions are included. The book is intended for anyone who is interested in learning essentials of RF CMOS LNA design and basic mathematics of on-chip inductor broadband modeling. The book is also beneficial to engineers and researchers in CMOS RFIC design - especially for WLAN, Bluetooth, and emerging wireless communication applications.

Author : Roberto Díaz Ortega
Publisher : McGraw Hill Professional
Page : 129 pages
File Size : 27,89 MB
Release : 2014-01-13
Category : Technology & Engineering
ISBN : 0071824448

GET BOOK

Cutting-edge techniques for ultra-wideband, low-noise amplifier design This pioneering resource presents alternatives for implementing power- and area-efficient integrated low-noise amplifiers for ultra-wideband communications. Design methodologies for distributed amplifiers, feedback amplifiers, inductor structures with reduced area, and inductorless techniques are discussed. Cowritten by international experts in industry and academia, this book addresses the state of the art in integrated circuit design in the context of emerging systems. Design of Low-Noise Amplifiers for Ultra-Wideband Communications covers: Ultra-wideband overview and system approach Distributed amplifiers Wideband low-noise amplifiers Feedback wideband low-noise amplifiers Inductorless techniques

Author : Rasoul Dehghani
Publisher : Artech House
Page : 206 pages
File Size : 26,24 MB
Release : 2013
Category : Technology & Engineering
ISBN : 1608071537

GET BOOK

CMOS operational amplifiers (Op Amps) are one of the most important building blocks in many of todays integrated circuits. This cutting-edge volume provides you with an analytical method for designing CMOS Op Amp circuits, placing emphasis on the practical aspects of the design process. This unique book takes an in-depth look at CMOS differential amplifiers, explaining how they are the main part of all Op Amps. The book presents important details and a design method for the different architectures of single ended Op Amps. You find complete chapters dedicated to the critical issues of CMOS output stages, fully differential Op Amps, and CMOS reference generators. This comprehensive book also includes an introduction to CMOS technology and the basics of the physical aspects of MOS transistors, providing you with the foundation needed to fully master the material.

Author : Frerik Witte
Publisher : Springer Science & Business Media
Page : 178 pages
File Size : 19,69 MB
Release : 2009-06-29
Category : Technology & Engineering
ISBN : 9048127564

GET BOOK

Dynamic Offset-Compensated CMOS Amplifiers describes the theory, design and realization of dynamic offset compensated CMOS amplifiers. It focuses on the design of general-purpose wide-band operational amplifiers and instrumentation amplifiers. Two offset compensation techniques are described: auto-zeroing and chopping. Several topologies are discussed, with which these techniques can be used in the design of wide-band dynamic offset-compensated amplifiers. Four implementations are discussed in detail: two low-offset wide-band operational amplifiers, a low-offset instrumentation amplifier, and a low-offset current-sense amplifier, which can sense the current drawn from supply voltages up to 28V .

Author : Dixian Zhao
Publisher : Springer
Page : 188 pages
File Size : 12,10 MB
Release : 2015-06-29
Category : Technology & Engineering
ISBN : 3319188399

GET BOOK

This book focuses on the development of design techniques and methodologies for 60-GHz and E-band power amplifiers and transmitters at device, circuit and layout levels. The authors show the recent development of millimeter-wave design techniques, especially of power amplifiers and transmitters, and presents novel design concepts, such as “power transistor layout” and “4-way parallel-series power combiner”, that can enhance the output power and efficiency of power amplifiers in a compact silicon area. Five state-of-the-art 60-GHz and E-band designs with measured results are demonstrated to prove the effectiveness of the design concepts and hands-on methodologies presented. This book serves as a valuable reference for circuit designers to develop millimeter-wave building blocks for future 5G applications.