[PDF] Bio Inspired Robotic Joint And Manipulator eBook

Author : Pei-Hsin Kuo
Publisher :
Page : 364 pages
File Size : 11,28 MB
Release : 2014
Category :
ISBN :

GET BOOK

One of the greatest challenges in controlling robotic hands is grasping and manipulating objects in unstructured and uncertain environments. Robotic hands are typically too rigid to react against unexpected impacts and disturbances in order to prevent damage. The human hands have great versatility and robustness due, in part, to the passive compliance and damping. Designing mechanical elements that are inspired by the nonlinear joint compliance of human hands is a promising solution to achieve human-like grasping and manipulation. However, the exact role of biomechanical elements in realizing joint stiffness is unknown. We conducted a series of experiments to investigate nonlinear stiffness and damping of the metacarpophalangeal (MCP) joint at the index finger. We designed a custom-made mechanism to integrate electromyography sensors (EMGs) and a motion capture system to collect data from 19 subjects. We investigated the relative contributions of muscle-tendon units and the MCP capsule ligament complex to joint stiffness with subject-specific modeling. The results show that the muscle-tendon units provide limited contribution to the passive joint compliance. This findings indicate that the parallel compliance, in the form of the capsule-ligament complex, is significant in defining the passive properties of the hand. To identify the passive damping, we used the hysteresis loops to investigate the energy dissipation function. We used symbolic regression and principal component analysis to derive and interpret the damping models. The results show that the nonlinear viscous damping depends on the cyclic frequency, and fluid and structural types of damping also exist at the MCP joint. Inspired by the nonlinear stiffness of the MCP joint, we developed a miniaturized mechanism that uses pouring liquid plastic to design energy storing elements. The key innovations in this design are: a) a set of nonlinear elasticity of compliant materials, b) variable pulley configurations to tune the stiffness profile, and c) pretension mechanism to scale the stiffness profile. The design exhibits human-like passive compliance. By taking advantage of miniaturized joint size and additive manufacturing, we incorporated the novel joint design in a novel robotic manipulator with six series elastic actuators (SEA). The robotic manipulator has passive joint compliance with the intrinsic property of human hands. To validate the system, we investigated the Cartesian stiffness of grasping with low-level force control. The results show that that the overall system performs a great force tracking with position feedback. The parallel compliance decreases the motor efforts and can stabilize the system.

Author : Yunhui Liu
Publisher : CRC Press
Page : 343 pages
File Size : 17,91 MB
Release : 2011-12-21
Category : Medical
ISBN : 1439854882

GET BOOK

Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers in the fields of control engineering, robotics, and biomedical engineering, this text helps readers understand the technology and principles in this emerging field.

Author : Yunhui Liu
Publisher : CRC Press
Page : 343 pages
File Size : 31,4 MB
Release : 2017-12-19
Category : Medical
ISBN : 1351833200

GET BOOK

Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers.

Author : Jun Ueda
Publisher : Academic Press
Page : 360 pages
File Size : 28,94 MB
Release : 2016-09-02
Category : Technology & Engineering
ISBN : 0128031522

GET BOOK

Human Modelling for Bio-inspired Robotics: Mechanical Engineering in Assistive Technologies presents the most cutting-edge research outcomes in the area of mechanical and control aspects of human functions for macro-scale (human size) applications. Intended to provide researchers both in academia and industry with key content on which to base their developments, this book is organized and written by senior experts in their fields. Human Modeling for Bio-Inspired Robotics: Mechanical Engineering in Assistive Technologies offers a system-level investigation into human mechanisms that inspire the development of assistive technologies and humanoid robotics, including topics in modelling of anatomical, musculoskeletal, neural and cognitive systems, as well as motor skills, adaptation and integration. Each chapter is written by a subject expert and discusses its background, research challenges, key outcomes, application, and future trends. This book will be especially useful for academic and industry researchers in this exciting field, as well as graduate-level students to bring them up to speed with the latest technology in mechanical design and control aspects of the area. Previous knowledge of the fundamentals of kinematics, dynamics, control, and signal processing is assumed. Presents the most recent research outcomes in the area of mechanical and control aspects of human functions for macro-scale (human size) applications Covers background information and fundamental concepts of human modelling Includes modelling of anatomical, musculoskeletal, neural and cognitive systems, as well as motor skills, adaptation, integration, and safety issues Assumes previous knowledge of the fundamentals of kinematics, dynamics, control, and signal processing

Author : Toshio Fukuda
Publisher : MDPI
Page : 555 pages
File Size : 25,23 MB
Release : 2018-11-07
Category : Electronic books
ISBN : 303897045X

GET BOOK

This book is a printed edition of the Special Issue "Bio-Inspired Robotics" that was published in Applied Sciences

Author : Dong Jun Shin
Publisher : Stanford University
Page : 171 pages
File Size : 27,53 MB
Release : 2011
Category :
ISBN :

GET BOOK

The increasing demand for physical interaction between humans and robots has led to an interest in robots whose behavior is guaranteed to be safe when they are in close proximity with humans. However, attaining sufficiently high levels of performance while ensuring safety creates formidable challenges in mechanical design, actuation, sensing, and control. To promote safety without compromising performance, a new actuation concept, referred to as hybrid actuation, has been developed. Since low impedance output at high frequencies is essential for robot safety, while optimal passive stiffness is needed for robot performance, the new actuation approach employs a pneumatic artificial muscle as a macro actuator to provide low-frequency torques. Artificial pneumatic muscles provide high force-to-weight ratio and inherent compliance, both of which allow for low impedance actuation. To compensate for the slow and non-linear dynamics of pneumatic actuation, a small electromagnetic actuator collocated at the robot's joint is employed as a mini actuator, which provides high mechanical bandwidth for high performance without increasing the inertia and size of the manipulator. To achieve the appropriate balance between safety and performance, design methodologies were developed that optimally determine key design parameters such as the required mini motor torque capacity, the joint stiffness introduced by an antagonistic pair of muscles, and the pulley radius. Using a testbed, referred to as the Stanford Safety Robot (S2rho), the hybrid actuation was evaluated for position tracking performance, force tracking performance, and impact behavior. The experimental results demonstrate that by significantly improving control performance with the hybrid actuation over performance with pneumatic muscles alone, while reducing the effective inertia significantly, the competing design objectives of safety and performance can be successfully integrated into a single robotic manipulator. As an extension of the hybrid actuation concept, the new design of dual four-degree-of-freedom robotic arms with torso is presented and detailed descriptions of the design are included.

Author : Shigeo Hirose
Publisher :
Page : 248 pages
File Size : 18,56 MB
Release : 1993
Category : Science
ISBN :

GET BOOK

Living systems often exhibit a fascinating repertoire of phenomena that inspire new engineering solutions to old problems. This book is an account of the author's investigations of the locomotion of snakes and the application of his findings to a new class of robots displaying snake-like motions. The author expertly presents the case that robots in which whole mechanisms move have many potential applications that should be fully exploited in the future when the pertinent technological developments have been achieved. This unique work will be interesting to both robotics engineers and zoologists.

Author : Gia Hoang Phan
Publisher : Springer Nature
Page : 97 pages
File Size : 38,17 MB
Release : 2022-02-23
Category : Technology & Engineering
ISBN : 9811695512

GET BOOK

This book presents a multi-disciplinary view of all aspects of rehabilitation robotics and non-invasive surgery, ideal for anyone new to the field. It includes perspectives from both engineers and clinicians. For skilled researchers and clinicians, it also summarizes current robot technologies and their application to various pathologies. The book will help the readers to develop the know-how and expertise necessary to guide those seeking a comprehensive understanding of this topic through their use of several commercial devices for robotic rehabilitation. The book targets the implementation of efficient robot strategies to facilitate the re-acquisition of motor skills. This technology incorporates the outcomes of behavioral studies on motor learning and its neural correlates into the design, implementation, and validation of robot agents that behave as optimal trainers, efficiently exploiting the structure and plasticity of the human sensorimotor systems.

Author : Dong Jun Shin
Publisher :
Page : pages
File Size : 41,32 MB
Release : 2011
Category :
ISBN :

GET BOOK

The increasing demand for physical interaction between humans and robots has led to an interest in robots whose behavior is guaranteed to be safe when they are in close proximity with humans. However, attaining sufficiently high levels of performance while ensuring safety creates formidable challenges in mechanical design, actuation, sensing, and control. To promote safety without compromising performance, a new actuation concept, referred to as hybrid actuation, has been developed. Since low impedance output at high frequencies is essential for robot safety, while optimal passive stiffness is needed for robot performance, the new actuation approach employs a pneumatic artificial muscle as a macro actuator to provide low-frequency torques. Artificial pneumatic muscles provide high force-to-weight ratio and inherent compliance, both of which allow for low impedance actuation. To compensate for the slow and non-linear dynamics of pneumatic actuation, a small electromagnetic actuator collocated at the robot's joint is employed as a mini actuator, which provides high mechanical bandwidth for high performance without increasing the inertia and size of the manipulator. To achieve the appropriate balance between safety and performance, design methodologies were developed that optimally determine key design parameters such as the required mini motor torque capacity, the joint stiffness introduced by an antagonistic pair of muscles, and the pulley radius. Using a testbed, referred to as the Stanford Safety Robot (S2rho), the hybrid actuation was evaluated for position tracking performance, force tracking performance, and impact behavior. The experimental results demonstrate that by significantly improving control performance with the hybrid actuation over performance with pneumatic muscles alone, while reducing the effective inertia significantly, the competing design objectives of safety and performance can be successfully integrated into a single robotic manipulator. As an extension of the hybrid actuation concept, the new design of dual four-degree-of-freedom robotic arms with torso is presented and detailed descriptions of the design are included.

Author : Maziar Ahmad Sharbafi
Publisher : Butterworth-Heinemann
Page : 698 pages
File Size : 18,16 MB
Release : 2017-11-21
Category : Technology & Engineering
ISBN : 0128037741

GET BOOK

Bioinspired Legged Locomotion: Models, Concepts, Control and Applications explores the universe of legged robots, bringing in perspectives from engineering, biology, motion science, and medicine to provide a comprehensive overview of the field. With comprehensive coverage, each chapter brings outlines, and an abstract, introduction, new developments, and a summary. Beginning with bio-inspired locomotion concepts, the book's editors present a thorough review of current literature that is followed by a more detailed view of bouncing, swinging, and balancing, the three fundamental sub functions of locomotion. This part is closed with a presentation of conceptual models for locomotion. Next, the book explores bio-inspired body design, discussing the concepts of motion control, stability, efficiency, and robustness. The morphology of legged robots follows this discussion, including biped and quadruped designs. Finally, a section on high-level control and applications discusses neuromuscular models, closing the book with examples of applications and discussions of performance, efficiency, and robustness. At the end, the editors share their perspective on the future directions of each area, presenting state-of-the-art knowledge on the subject using a structured and consistent approach that will help researchers in both academia and industry formulate a better understanding of bioinspired legged robotic locomotion and quickly apply the concepts in research or products. Presents state-of-the-art control approaches with biological relevance Provides a thorough understanding of the principles of organization of biological locomotion Teaches the organization of complex systems based on low-dimensional motion concepts/control Acts as a guideline reference for future robots/assistive devices with legged architecture Includes a selective bibliography on the most relevant published articles