[PDF] An Explicitly Coupled Hydro Geomechanical Model For Simulating Hydraulic Fracturing In Complex Discrete Fracture Networks eBook

Author : Mark W. McClure
Publisher : Springer Science & Business Media
Page : 96 pages
File Size : 29,7 MB
Release : 2013-06-15
Category : Technology & Engineering
ISBN : 3319003836

GET BOOK

Discrete Fracture Network Modeling of Hydraulic Stimulation describes the development and testing of a model that couples fluid-flow, deformation, friction weakening, and permeability evolution in large, complex two-dimensional discrete fracture networks. The model can be used to explore the behavior of hydraulic stimulation in settings where matrix permeability is low and preexisting fractures play an important role, such as Enhanced Geothermal Systems and gas shale. Used also to describe pure shear stimulation, mixed-mechanism stimulation, or pure opening-mode stimulation. A variety of novel techniques to ensure efficiency and realistic model behavior are implemented, and tested. The simulation methodology can also be used as an efficient method for directly solving quasistatic fracture contact problems. Results show how stresses induced by fracture deformation during stimulation directly impact the mechanism of propagation and the resulting fracture network.

Author : Mark McClure
Publisher : Springer
Page : 90 pages
File Size : 32,83 MB
Release : 2013-06-19
Category : Science
ISBN : 9783319003849

GET BOOK

Discrete Fracture Network Modeling of Hydraulic Stimulation describes the development and testing of a model that couples fluid-flow, deformation, friction weakening, and permeability evolution in large, complex two-dimensional discrete fracture networks. The model can be used to explore the behavior of hydraulic stimulation in settings where matrix permeability is low and preexisting fractures play an important role, such as Enhanced Geothermal Systems and gas shale. Used also to describe pure shear stimulation, mixed-mechanism stimulation, or pure opening-mode stimulation. A variety of novel techniques to ensure efficiency and realistic model behavior are implemented, and tested. The simulation methodology can also be used as an efficient method for directly solving quasistatic fracture contact problems. Results show how stresses induced by fracture deformation during stimulation directly impact the mechanism of propagation and the resulting fracture network.

Author : Mohsen Babazadeh
Publisher :
Page : 440 pages
File Size : 38,47 MB
Release : 2019
Category :
ISBN :

GET BOOK

This dissertation intends to advance fundamental understanding of two areas of interest in the petroleum industry: complex stimulated fracture network during hydraulic fracturing treatments and induced seismicity during wastewater disposal operations. Successful completion of hydraulic fractures in unconventional formations has been the primary source of increased oil and gas production in the US. However, field observations suggest that the hydraulic fracture networks are much more complex and different from the classical description of bi-wing planar fractures. Thus, the attempts to optimize this stimulation technique are hindered by the uncertainties in predicting the complex fracture network. A by-product of massive improvement in oil and gas production is a significant amount of water being co-produced from these formations. The common practice in the industry is to recycle wastewater for hydraulic fracturing purposes or reinject it into the reservoir through disposal wells. In certain regions of the US, this wastewater injection has led to historically high seismicity rates and earthquakes of Magnitude 5 and above which caused the public to be concerned. To maintain the social license to continue such operations, these concerns need to be addressed, and the physics behind such induced events need to be understood. Two novel hydraulic fracturing and induced seismicity simulators are developed that implicitly couple fluid flow with the stresses induced by fracture deformation in large, complex, three-dimensional discrete fracture networks. The simulators can describe the propagation of hydraulic fractures and opening and shear stimulation of natural fractures. Fracture elements can open or slide, depending on their stress state, fluid pressure, and mechanical properties. Fracture sliding occurs in the direction of maximum resolved shear stress. Nonlinear empirical relations are used to relate normal stress, fracture opening, and fracture sliding to fracture aperture and transmissivity. Field-scale hydraulic fracturing simulations were performed in a dense naturally fractured formation. Height containment of propagating hydraulic fractures between bedding layers is modeled with a vertically heterogeneous stress field or by explicitly imposing hydraulic fracture height containment as a model assumption. The propagating hydraulic fractures can cross natural fractures or terminate against them depending on the natural fracture orientation and stress anisotropy. The simulations demonstrate how interaction with natural fractures in the formation can help explain the high net pressures, relatively short hydraulic fracture lengths, and broad regions of microseismicity that are often observed in the field during stimulation in low permeability formations, some of which were not predicted by classical hydraulic fracturing models. Depending on input parameters, our simulations predicted a variety of stimulation behaviors, from long hydraulic fractures with minimal leakoff into surrounding fractures to broad regions of dense fracturing with a branching network of many natural and newly formed fractures. Induced seismicity simulator was developed to investigate the effects of multiple operational, hydraulic, and geophysical parameters on the magnitude of induced earthquakes. The rate-and-state framework is implemented to include the effect of fault nonlinear friction evolution and to model unstable earthquake rupture. The Embedded Discrete Fracture Model (EDFM) technique is used to model the fluid flow between the matrix and fractures efficiently. The results show that high-rate injections are more likely to induce a more significant earthquake, confirming the statistical correlation attributing induced events to high-rate injection wells. To understand the seismic occurrence outside of the injection zone, the effect of fault permeability structure on seismicity is studied by assigning non-uniform permeabilities as an input parameter. The model shows that the fault rupture is dominantly controlled by initial pressure and stress heterogeneity which ultimately affect the magnitude of an induced earthquake event

Author : Yu-Shu Wu
Publisher : Gulf Professional Publishing
Page : 568 pages
File Size : 10,83 MB
Release : 2017-11-30
Category : Technology & Engineering
ISBN : 0128129999

GET BOOK

Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today’s petroleum engineer with an all-inclusive product to characterize and optimize today’s more complex reservoirs. Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics Provides today’s petroleum engineer with model validation tools backed by real-world case studies

Author : Ali Moinfar
Publisher :
Page : 464 pages
File Size : 29,81 MB
Release : 2013
Category :
ISBN :

GET BOOK

Naturally fractured reservoirs (NFRs) hold a significant amount of the world's hydrocarbon reserves. Compared to conventional reservoirs, NFRs exhibit a higher degree of heterogeneity and complexity created by fractures. The importance of fractures in production of oil and gas is not limited to naturally fractured reservoirs. The economic exploitation of unconventional reservoirs, which is increasingly a major source of short- and long-term energy in the United States, hinges in part on effective stimulation of low-permeability rock through multi-stage hydraulic fracturing of horizontal wells. Accurate modeling and simulation of fractured media is still challenging owing to permeability anisotropies and contrasts. Non-physical abstractions inherent in conventional dual porosity and dual permeability models make these methods inadequate for solving different fluid-flow problems in fractured reservoirs. Also, recent approaches for discrete fracture modeling may require large computational times and hence the oil industry has not widely used such approaches, even though they give more accurate representations of fractured reservoirs than dual continuum models. We developed an embedded discrete fracture model (EDFM) for an in-house fully-implicit compositional reservoir simulator. EDFM borrows the dual-medium concept from conventional dual continuum models and also incorporates the effect of each fracture explicitly. In contrast to dual continuum models, fractures have arbitrary orientations and can be oblique or vertical, honoring the complexity and heterogeneity of a typical fractured reservoir. EDFM employs a structured grid to remediate challenges associated with unstructured gridding required for other discrete fracture models. Also, the EDFM approach can be easily incorporated in existing finite difference reservoir simulators. The accuracy of the EDFM approach was confirmed by comparing the results with analytical solutions and fine-grid, explicit-fracture simulations. Comparison of our results using the EDFM approach with fine-grid simulations showed that accurate results can be achieved using moderate grid refinements. This was further verified in a mesh sensitivity study that the EDFM approach with moderate grid refinement can obtain a converged solution. Hence, EDFM offers a computationally-efficient approach for simulating fluid flow in NFRs. Furthermore, several case studies presented in this study demonstrate the applicability, robustness, and efficiency of the EDFM approach for modeling fluid flow in fractured porous media. Another advantage of EDFM is its extensibility for various applications by incorporating different physics in the model. In order to examine the effect of pressure-dependent fracture properties on production, we incorporated the dynamic behavior of fractures into EDFM by employing empirical fracture deformation models. Our simulations showed that fracture deformation, caused by effective stress changes, substantially affects pressure depletion and hydrocarbon recovery. Based on the examples presented in this study, implementation of fracture geomechanical effects in EDFM did not degrade the computational performance of EDFM. Many unconventional reservoirs comprise well-developed natural fracture networks with multiple orientations and complex hydraulic fracture patterns suggested by microseismic data. We developed a coupled dual continuum and discrete fracture model to efficiently simulate production from these reservoirs. Large-scale hydraulic fractures were modeled explicitly using the EDFM approach and numerous small-scale natural fractures were modeled using a dual continuum approach. The transport parameters for dual continuum modeling of numerous natural fractures were derived by upscaling the EDFM equations. Comparison of the results using the coupled model with that of using the EDFM approach to represent all natural and hydraulic fractures explicitly showed that reasonably accurate results can be obtained at much lower computational cost by using the coupled approach with moderate grid refinements.

Author : Ashish Kumar (Ph. D.)
Publisher :
Page : 392 pages
File Size : 21,92 MB
Release : 2020
Category :
ISBN :

GET BOOK

Hydraulic fracturing in horizontal wells has enabled economic production from ultra-low permeability reservoirs. The productivity of these hydraulically fractured wells depends on the fracture dimensions, conductivity, connectivity to the wellbore, and applied drawdown pressure. Traditional numerical simulation models used to analyze the productivity of hydraulically fractured wells assume a planar bi-wing fracture that is open and connected to the wellbore. However, several core-through field studies and fracture propagation models have demonstrated that a hydraulic fracturing process can create non-planar complex fracture networks. The conductivity and connectivity of these complex fractures are highly dependent on the in-situ stress changes due to production. Hence it is critical to consider complex fractures and the impact of geomechanics in the simulation models for analyzing fractured well productivity. A finite-volume method based geomechanics coupled reservoir model was developed to simulate production from complex fracture networks. An automated meshing method was developed to create the reservoir, and fracture mesh for any given arbitrarily shaped fracture network. The reservoir-fracture network model accounts for fracture closure effects during production. The model developed in this dissertation was used to investigate the impact of drawdown strategy (choke management) on the productivity of wells producing from complex fracture networks. The competing phenomenon of higher initial production rate and faster fracture closure depending on the applied drawdown strategy was observed. Based on NPV maximization, an optimum drawdown strategy can be calculated. The model was also applied to estimate the effective permeability of the SRV (stimulated reservoir volume) to account for complex fractures in upscaled traditional reservoir simulation models. Tracer transport was implemented in the geomechanical reservoir simulation model to analyze the impact of (a) fracture geometry, (b) fracture propagation and closure effects, and (c) fracture complexity on the tracer response curves. An effective model was created to simulate tracer tests in complex fracture networks. Closure of activated natural fractures can explain the multiple peaks in the tracer response curves observed in the field tests. A neural network-based inverse modeling was performed to estimate effective connected fracture length using peak tracer concentration values, peak times, and tracer recovery from chemical tracer flowback data. Observations from the chemical tracer analysis were combined with radioactive proppant tracer and pressure interference tests to diagnose well interference for the Hydraulic Fracturing Test Site #1

Author : Yu Wang
Publisher :
Page : 0 pages
File Size : 29,73 MB
Release : 2020
Category :
ISBN :

GET BOOK

Hydraulic fracturing is one of the standard techniques adopted by oil and gas industries to enhance production in unconditional reservoirs. Reservoir properties and treatment designs have a significant influence on the effectiveness of hydraulic fracturing treatments. Extensive studies on the mechanism of hydraulic fracturing have been conducted to optimize the hydraulic fracturing design. Recent advances in fracture diagnostic technology have brought new insights to the complex fracture geometry. Numerical simulation is an economical approach to investigate the generation of fracture geometry and its effect on post-treatment production enhancement. This work proposes a workflow to study the fracture complexity through coupling the geomechanical simulator Irazu and the reservoir simulator CMG. The geo-mechanical simulator is devised to simulate the hydraulic fracturing process employing the hybrid finite-discrete element method while the reservoir simulator CMG is used for the reservoir post-treatment production forecast.

Author : Michael John Welch
Publisher : Springer Nature
Page : 237 pages
File Size : 19,55 MB
Release : 2020-09-18
Category : Technology & Engineering
ISBN : 3030524140

GET BOOK

This book presents and describes an innovative method to simulate the growth of natural fractural networks in different geological environments, based on their geological history and fundamental geomechanical principles. The book develops techniques to simulate the growth and interaction of large populations of layer-bound fracture directly, based on linear elastic fracture mechanics and subcritical propagation theory. It demonstrates how to use these techniques to model the nucleation, propagation and interaction of layer-bound fractures in different orientations around large scale geological structures, based on the geological history of the structures. It also explains how to use these techniques to build more accurate discrete fracture network (DFN) models at a reasonable computational cost. These models can explain many of the properties of natural fracture networks observed in outcrops, using actual outcrop examples. Finally, the book demonstrates how it can be incorporated into flow modelling workflows using subsurface examples from the hydrocarbon and geothermal industries. Modelling the Evolution of Natural Fracture Networks will be of interest to anyone curious about understanding and predicting the evolution of complex natural fracture networks across large geological structures. It will be helpful to those modelling fluid flow through fractures, or the geomechanical impact of fracture networks, in the hydrocarbon, geothermal, CO2 sequestration, groundwater and engineering industries.

Author :
Publisher :
Page : pages
File Size : 33,25 MB
Release : 2016
Category :
ISBN :

GET BOOK

The presence of natural fractures will usually result in a complex fracture network due to the interactions between hydraulic and natural fracture. The reactivation of natural fractures can generally provide additional flow paths from formation to wellbore which play a crucial role in improving the hydrocarbon recovery in these ultra-low permeability reservoir. Thus, accurate description of the geometry of discrete fractures and bedding is highly desired for accurate flow and production predictions. Compared to conventional continuum models that implicitly represent the discrete feature, Discrete Fracture Network (DFN) models could realistically model the connectivity of discontinuities at both reservoir scale and well scale. In this work, a new hybrid numerical model that couples Discrete Fracture Network (DFN) and Dual-Lattice Discrete Element Method (DL-DEM) is proposed to investigate the interaction between hydraulic fracture and natural fractures. Based on the proposed model, the effects of natural fracture orientation, density and injection properties on hydraulic-natural fractures interaction are investigated.