[PDF] An Experimental Study Of Local Heat Transfer To An Impinging Jet On Non Flat Surfaces eBook

Author :
Publisher :
Page : pages
File Size : 37,79 MB
Release : 1911
Category :
ISBN :

GET BOOK

This thesis reports the results of an experimental study into the flow and heat transfers associated with both inclined and orthogonally impinging axisymmetric air jets. The majority of previously reported studies have been mainly confined to orthogonally impinging jets in stagnant surroundings. In this investigation, free jets as well as the effects of crossflows are considered. This investigation is Primarily concerned with local heat transfer variations. The experimental tests were. conducted with a single 12.7 mm diameter jet impinging on a flat surface, and heat transfers were evaluated using a heat-mass transfer analogy (t e Chilton-Colburn analogy). The sublimation of naphthalene was employed as the mass transfer technique. The flowfield associated with impinging jets has a significant influence on their heat transfer characteristics., In view of the present limited level of understanding of this 'complex' flowfield, extensive flow visualisation techniques were employed in this present investigation. Those were primarily intended to aid interpretation of the experimental heat transfer results, and also to provide further physical understanding of the flowfields resulting from the interactions between impinging jets and crossflowing streams. The flow and heat transfer tests conducted in the programme of work reported in this thesis covered typical ranges of flow parameters of interest in many practical applications of jet impingement systems. Jet inclinations of 45°, 600, and 90°, nozzle to target spacings of 2,11, and 8 nozzle diameters were studied. The Reynolds nuinbers were 30,200,32,700 and 55,100 and mass velocity ratios In the range 4.0 to 3.8 were studied. The effects of these parameters on the flow and heal transfers associated with impinging jets are reported. Comparisons were drawn between the heat transfer results and those of previously reported studies where appropriate.

Author : Stephen Whitaker
Publisher : Elsevier
Page : 575 pages
File Size : 38,81 MB
Release : 2013-10-22
Category : Science
ISBN : 1483159434

GET BOOK

Fundamental Principles of Heat Transfer introduces the fundamental concepts of heat transfer: conduction, convection, and radiation. It presents theoretical developments and example and design problems and illustrates the practical applications of fundamental principles. The chapters in this book cover various topics such as one-dimensional and transient heat conduction, energy and turbulent transport, forced convection, thermal radiation, and radiant energy exchange. There are example problems and solutions at the end of every chapter dealing with design problems. This book is a valuable introductory course in heat transfer for engineering students.

Author : B. Sundén
Publisher : WIT Press
Page : 361 pages
File Size : 36,22 MB
Release : 2005-02-21
Category : Science
ISBN : 1853129569

GET BOOK

Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.

Author : James W. Gauntner
Publisher :
Page : 52 pages
File Size : 40,79 MB
Release : 1970
Category : Heat
ISBN :

GET BOOK

Flow characteristics of single jets impinging on flat surfaces have been studied by many investigators. The results of some of the numerous studies are summarized herein. Suggested methods for determining velocities and pressures on which to base heat-transfer correlations for use in impingement cooling design are presented.

Author : John N. B. Livingood
Publisher :
Page : 36 pages
File Size : 24,97 MB
Release : 1973
Category : Cylinders
ISBN :

GET BOOK

An experimental study was made of the local heat-transfer characteristics of air jets impinging on the concave side of a right circular semicylinder. A correlation was developed for expressing individual and combined effects of a number of dimensionless variables on the normalized Nusselt number distributions. Results of the present study are in good agreement with those of other investigators.

Author : B. B. Biswal
Publisher : Springer Nature
Page : 1688 pages
File Size : 48,6 MB
Release : 2020-01-16
Category : Technology & Engineering
ISBN : 9811501246

GET BOOK

This book comprises select proceedings of the International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018). The book contains peer reviewed articles covering thematic areas such as fluid mechanics, renewable energy, materials and manufacturing, thermal engineering, vibration and acoustics, experimental aerodynamics, turbo machinery, and robotics and mechatronics. Algorithms and methodologies of real-time problems are described in this book. The contents of this book will be useful for both academics and industry professionals.