[PDF] Advanced Theory Of Mechanisms And Machines eBook

Author : M.Z. Kolovsky
Publisher : Springer Science & Business Media
Page : 403 pages
File Size : 49,61 MB
Release : 2012-09-03
Category : Science
ISBN : 3540465162

GET BOOK

A new approach to the theory of mechanisms and machines, based on a lecture course for mechanical engineering students at the St. Petersburg State Technical University. The material differs from traditional textbooks due to its more profound elaboration of the methods of structural, geometric, kinematic and dynamic analysis. These established and novel methods take into account the needs of modern machine design as well as the potential of computers.

Author : C. S. SHARMA
Publisher : PHI Learning Pvt. Ltd.
Page : 728 pages
File Size : 12,44 MB
Release : 2006-01-01
Category : Technology & Engineering
ISBN : 9788120329010

GET BOOK

Intended to cater to the needs of undergraduate students in mechanical, production, and industrial engineering disciplines, this book provides a comprehensive coverage of the fundamentals of analysis and synthesis (kinematic and dynamic) of mechanisms and machines. It clearly describes the techniques needed to test the suitability of a mechanical system for a given task and to develop a mechanism or machine according to the given specifications. The text develops, in addition, a strong understanding of the kinematics of mechanisms and discusses various types of mechanisms such as cam-and-follower, gears, gear trains and gyroscope.

Author : J. S. Rao
Publisher : bohem press
Page : 628 pages
File Size : 10,23 MB
Release : 2007
Category : Mechanical engineering
ISBN : 9788122404265

GET BOOK

This Book Evolved Itself Out Of 25 Years Of Teaching Experience In The Subject, Moulding Different Important Aspects Into A One Year Course Of Mechanism And Machine Theory. Basic Principles Of Analysis And Synthesis Of Mechanisms With Lower And Higher Pairs Are Both Included Considering Both Kinematic And Kinetic Aspects. A Chapter On Hydrodynamic Lubrication Is Included In The Book. Balancing Machines Are Introduced In The Chapter On Balancing Of Rotating Parts. Mechanisms Used In Control Namely, Governors And Gyroscopes Are Discussed In A Separate Chapter. The Book Also Contains A Chapter On Principles Of Theory Of Vibrations As Applied To Machines. A Solution Manual To Problems Given At The End Of Each Chapter Is Also Available. Principles Of Balancing Of Linkages Is Also Included. Thus The Book Takes Into Account All Aspects Of Mechanism And Machine Theory To The Reader Studying A First Course On This Subject.This Book Is Intended For Undergraduate Students Taking Basic Courses In Mechanism And Machine Theory. The Practice Of Machines Has Been Initially To Use Inventions And Establishment Of Basic Working Models And Then Generalising The Theory And Hence The Earlier Books Emphasises These Principles. With The Advancement Of Theory Particularly In The Last Two Decades, New Books Come Up With A Stress On Specific Topics.The Book Retains All The Aspects Of Mechanism And Machine Theory In A Unified Manner As Far As Possible For A Two Semester Course At Undergraduate Level Without Recourse To Following Several Text Books And Derive The Benefits Of Basic Principles Recently Advanced In Mechanism And Machine Theory.

Author : Antonio Simón Mata
Publisher : Springer
Page : 415 pages
File Size : 12,12 MB
Release : 2016-05-27
Category : Technology & Engineering
ISBN : 3319319701

GET BOOK

This book develops the basic content for an introductory course in Mechanism and Machine Theory. The text is clear and simple, supported by more than 350 figures. More than 60 solved exercises have been included to mark the translation of this book from Spanish into English. Topics treated include: dynamic analysis of machines; introduction to vibratory behavior; rotor and piston balanced; critical speed for shafts; gears and train gears; synthesis for planar mechanisms; and kinematic and dynamic analysis for robots. The chapters in relation to kinematics and dynamics for planar mechanisms can be studied with the help of WinMecc software, which allows the reader to study in an easy and intuitive way, but exhaustive at the same time. This computer program analyzes planar mechanisms of one-degree of freedom and whatever number of links. The program allows users to build a complex mechanism. They can modify any input data in real time changing values in a numeric way or using the computer mouse to manipulate links and vectors while mechanism is moving and showing the results. This powerful tool does not only show the results in a numeric way by means of tables and diagrams but also in a visual way with scalable vectors and curves.

Author : Joseph Edward Shigley
Publisher :
Page : 760 pages
File Size : 30,16 MB
Release : 1995
Category : Technology & Engineering
ISBN :

GET BOOK

This text covers machine design, mechanisms and vibration, enabling students to learn how they operate, what they do, and their geometry. Important concepts of position difference and apparent position are introduced, teaching students that there are two kinds of motion referred to a stationary reference system. Emphasis is placed on graphical methods of analysis result in feedback and better understanding of the geometry involved.

Author : Jaroslav Beran
Publisher : Springer Nature
Page : 338 pages
File Size : 46,33 MB
Release : 2021-08-03
Category : Technology & Engineering
ISBN : 3030835944

GET BOOK

This book presents the latest research advances relating to machines and mechanisms. Featuring papers from the XIII International Conference on the Theory of Machines and Mechanisms (TMM 2020), held in Liberec, Czech Republic, on September 7-9, 2021, it includes a selection of the most important new results and developments. The book is divided into five parts, representing a well-balanced overview, and spanning the general theory of machines and mechanisms, through analysis and synthesis of planar and spatial mechanisms, linkages and cams, robots and manipulators, dynamics of machines and mechanisms, rotor dynamics, computational mechanics, vibration and noise in machines, optimization of mechanisms and machines, mechanisms of textile machines, mechatronics and control and monitoring systems of machines. This conference is traditionally held every four years under the auspices of the international organisation IFToMM and the Czech Society for Mechanics.

Author : J. S. Rao
Publisher : New Age International
Page : 408 pages
File Size : 41,11 MB
Release : 2007
Category : Machine design
ISBN : 9788122410419

GET BOOK

The Theory Of Machines Or Mechanism And Machine Theory Is A Basic Subject Taught In Engineering Schools To Mechanical Engineering Students. This Subject Lays The Foundation On Which Mechanical Engineering Design And Practice Rests With. It Is Also A Subject Taught When The Students Have Just Entered Engineering Discipline And Are Yet To Formulate Basics Of Mechanical Engineering. This Subject Needs A Lost Of Practice In Solving Engineering Problems And There Is Currently No Good Book Explaining The Subject Through Solved Problems. This Book Is Written To Fill Such A Void And Help The Students Preparing For Examinations. It Contains In All 336 Solved Problems, Several Illustrations And 138 Additional Problems For Practice. Basic Theory And Background Is Presented, Though It Is Not Like A Full Fledged Text Book In That Sense.This Book Contains 20 Chapters, The First One Giving A Historical Background On The Subject. The Second Chapter Deals With Planar Mechanisms Explaining Basic Concepts Of Machines. Kinematic Analysis Is Given In Chapter 3 With Graphical As Well As Analytical Tools. The Synthesis Of Mechanisms Is Given In Chapter 4. Additional Mechanisms And Coupler Curve Theory Is Presented In Chapter 5. Chapter 6 Discusses Various Kinds Of Cams, Their Analysis And Design. Spur Gears, Helical Gears, Worm Gears And Bevel Gears And Gear Trains Are Extensively Dealt With In Chapters 7 To 9. Hydrodynamic Thrust And Journal Bearings (Long And Short Bearings) Are Considered In Chapter 10.Static Forces, Inertia Forces And A Combined Force Analysis Of Machines Is Considered In Chapters 11 To 13. The Turning Moment And Flywheel Design Is Given In Chapter 14. Chapters 15 And 16 Deal With Balancing Of Rotating Parts, Reciprocating Parts And Four Bar Linkages. Force Analysis Of Gears And Cams Is Dealt With In Chapter 17. Chapter 18 Is Concerned With Mechanisms Used In Control, Viz., Governors And Gyroscopes. Chapters 19 And 20 Introduce Basic Concepts Of Machine Vibrations And Critical Speeds Of Machinery.A Special Feature Of This Book Is The Availability Of Three Computer Aided Learning Packages For Planar Mechanisms, Their Analysis And Animation, For Analysis Of Cams With Different Followers And Dynamics Of Reciprocating Machines, Balancing And Flywheel Analysis.

Author : RS Khurmi | JK Gupta
Publisher : S. Chand Publishing
Page : 1092 pages
File Size : 45,85 MB
Release : 2005
Category : Technology & Engineering
ISBN : 9788121925242

GET BOOK

While writing the book,we have continuously kept in mind the examination requirments of the students preparing for U.P.S.C.(Engg. Services)and A.M.I.E.(I)examinations.In order to make this volume more useful for them,complete solutions of their examination papers up to 1975 have also been included.Every care has been taken to make this treatise as self-explanatory as possible.The subject matter has been amply illustrated by incorporating a good number of solved,unsolved and well graded examples of almost every variety.