[PDF] Nonlinear Control Systems Ii eBook

Author : Alberto Isidori
Publisher : Springer Science & Business Media
Page : 557 pages
File Size : 17,29 MB
Release : 2013-04-17
Category : Technology & Engineering
ISBN : 1846286158

GET BOOK

The purpose of this book is to present a self-contained description of the fun damentals of the theory of nonlinear control systems, with special emphasis on the differential geometric approach. The book is intended as a graduate text as weil as a reference to scientists and engineers involved in the analysis and design of feedback systems. The first version of this book was written in 1983, while I was teach ing at the Department of Systems Science and Mathematics at Washington University in St. Louis. This new edition integrates my subsequent teaching experience gained at the University of Illinois in Urbana-Champaign in 1987, at the Carl-Cranz Gesellschaft in Oberpfaffenhofen in 1987, at the University of California in Berkeley in 1988. In addition to a major rearrangement of the last two Chapters of the first version, this new edition incorporates two additional Chapters at a more elementary level and an exposition of some relevant research findings which have occurred since 1985.

Author : Alberto Isidori
Publisher : Springer Science & Business Media
Page : 300 pages
File Size : 18,49 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 1447105494

GET BOOK

This eagerly awaited follow-up to Nonlinear Control Systems incorporates recent advances in the design of feedback laws, for the purpose of globally stabilizing nonlinear systems via state or output feedback. The author is one of the most prominent researchers in the field.

Author : Alberto Isidori
Publisher : Springer Science & Business Media
Page : 487 pages
File Size : 43,65 MB
Release : 2013-04-17
Category : Computers
ISBN : 3662025817

GET BOOK

The purpose of this book is to present a self-contained description of the fundamentals of the theory of nonlinear control systems, with special emphasis on the differential geometric approach. The book is intended as a graduate text as well as a reference to scientists and engineers involved in the analysis and design of feedback systems. The first version of this book was written in 1983, while I was teaching at the Department of Systems Science and Mathematics at Washington University in St. Louis. This new edition integrates my subsequent teaching experience gained at the University of Illinois in Urbana-Champaign in 1987, at the Carl Cranz Gesellschaft in Oberpfaffenhofen in 1987, at the University of California in Berkeley in 1988. In addition to a major rearrangement of the last two Chapters of the first version, this new edition incorporates two additional Chapters at a more elementary level and an exposition of some relevant research findings which have occurred since 1985. In the past few years differential geometry has proved to be an effective means of analysis and design of nonlinear control systems as it was in the past for the Laplace transform, complex variable theory and linear algebra in relation to linear systems. Synthesis problems of longstanding interest like disturbance decoupling, noninteracting control, output regulation, and the shaping of the input-output response, can be dealt with relative ease, on the basis of mathematical concepts that can be easily acquired by a control scientist.

Author : Thomas L. Vincent
Publisher : John Wiley & Sons
Page : 584 pages
File Size : 20,78 MB
Release : 1997-06-23
Category : Science
ISBN : 9780471042358

GET BOOK

Designed for one-semester introductory senior-or graduate-level course, the authors provide the student with an introduction of analysis techniques used in the design of nonlinear and optimal feedback control systems. There is special emphasis on the fundamental topics of stability, controllability, and optimality, and on the corresponding geometry associated with these topics. Each chapter contains several examples and a variety of exercises.

Author : Horacio Márquez
Publisher : Wiley-Interscience
Page : 376 pages
File Size : 34,30 MB
Release : 2003-04-25
Category : Science
ISBN : 9780471427995

GET BOOK

Provides complete coverage of both the Lyapunov and Input-Output stability theories, ina readable, concise manner. * Supplies an introduction to the popular backstepping approach to nonlinear control design * Gives a thorough discussion of the concept of input-to-state stability * Includes a discussion of the fundamentals of feedback linearization and related results. * Details complete coverage of the fundamentals of dissipative system's theory and its application in the so-called L2gain control prooblem, for the first time in an introductory level textbook. * Contains a thorough discussion of nonlinear observers, a very important problem, not commonly encountered in textbooksat this level. *An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Author : Daizhan Cheng
Publisher : Springer Science & Business Media
Page : 551 pages
File Size : 32,60 MB
Release : 2011-03-28
Category : Science
ISBN : 3642115500

GET BOOK

"Analysis and Design of Nonlinear Control Systems" provides a comprehensive and up to date introduction to nonlinear control systems, including system analysis and major control design techniques. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. Scientists and engineers engaged in the field of Nonlinear Control Systems will find it an extremely useful handy reference book. Dr. Daizhan Cheng, a professor at Institute of Systems Science, Chinese Academy of Sciences, has been working on the control of nonlinear systems for over 30 years and is currently a Fellow of IEEE and a Fellow of IFAC, he is also the chairman of Technical Committee on Control Theory, Chinese Association of Automation.

Author : Xiao-Xin Liao
Publisher : Springer Science & Business Media
Page : 186 pages
File Size : 25,68 MB
Release : 2013-04-17
Category : Science
ISBN : 9401706085

GET BOOK

As is well-known, a control system always works under a variety of accidental or continued disturbances. Therefore, in designing and analysing the control system, stability is the first thing to be considered. Classic control theory was basically limited to a discussion of linear systems with constant coefficients. The fundamental tools for such studies were the Routh-Hurwitz algebraic criterion and the Nyquist geometric criterion. However, modern control theory mainly deals with nonlinear problems. The stability analysis of nonlinear control systems based on Liapunov stability theory can be traced back to the Russian school of stability. In 1944, the Russian mathematician Lurie, a specialist in control theory, discussed the stability of an autopilot. The well-known Lurie problem and the concept of absolute stability are presented, which is of universal significance both in theory and practice. Up until the end of the 1950's, the field of absolute stability was monopolized mainly by Russian scholars such as A. 1. Lurie, M. A. Aizeman, A. M. Letov and others. At the beginning of the 1960's, some famous American mathematicians such as J. P. LaSalle, S. Lefschetz and R. E. Kalman engaged themself in this field. Meanwhile, the Romanian scholar Popov presented a well-known frequency criterion and consequently ma de a decisive breakthrough in the study of absolute stability.

Author : Qiang Lu
Publisher : Springer Science & Business Media
Page : 398 pages
File Size : 28,36 MB
Release : 2013-04-17
Category : Mathematics
ISBN : 1475733127

GET BOOK

Nonlinear Control Systems and Power System Dynamics presents a comprehensive description of nonlinear control of electric power systems using nonlinear control theory, which is developed by the differential geometric approach and nonlinear robust control method. This book explains in detail the concepts, theorems and algorithms in nonlinear control theory, illustrated by step-by-step examples. In addition, all the mathematical formulation involved in deriving the nonlinear control laws of power systems are sufficiently presented. Considerations and cautions involved in applying nonlinear control theory to practical engineering control designs are discussed and special attention is given to the implementation of nonlinear control laws using microprocessors. Nonlinear Control Systems and Power System Dynamics serves as a text for advanced level courses and is an excellent reference for engineers and researchers who are interested in the application of modern nonlinear control theory to practical engineering control designs.

Author : Michael J. Grimble
Publisher : Springer Nature
Page : 778 pages
File Size : 28,63 MB
Release : 2020-05-19
Category : Technology & Engineering
ISBN : 1447174577

GET BOOK

Nonlinear Industrial Control Systems presents a range of mostly optimisation-based methods for severely nonlinear systems; it discusses feedforward and feedback control and tracking control systems design. The plant models and design algorithms are provided in a MATLAB® toolbox that enable both academic examples and industrial application studies to be repeated and evaluated, taking into account practical application and implementation problems. The text makes nonlinear control theory accessible to readers having only a background in linear systems, and concentrates on real applications of nonlinear control. It covers: different ways of modelling nonlinear systems including state space, polynomial-based, linear parameter varying, state-dependent and hybrid; design techniques for nonlinear optimal control including generalised-minimum-variance, model predictive control, quadratic-Gaussian, factorised and H∞ design methods; design philosophies that are suitable for aerospace, automotive, marine, process-control, energy systems, robotics, servo systems and manufacturing; steps in design procedures that are illustrated in design studies to define cost-functions and cope with problems such as disturbance rejection, uncertainties and integral wind-up; and baseline non-optimal control techniques such as nonlinear Smith predictors, feedback linearization, sliding mode control and nonlinear PID. Nonlinear Industrial Control Systems is valuable to engineers in industry dealing with actual nonlinear systems. It provides students with a comprehensive range of techniques and examples for solving real nonlinear control design problems.

Author : Oded Yaniv
Publisher : Springer Science & Business Media
Page : 382 pages
File Size : 43,41 MB
Release : 2013-04-17
Category : Technology & Engineering
ISBN : 147576331X

GET BOOK

Quantitative Feedback Design of Linear and Nonlinear Control Systems is a self-contained book dealing with the theory and practice of Quantitative Feedback Theory (QFT). The author presents feedback synthesis techniques for single-input single-output, multi-input multi-output linear time-invariant and nonlinear plants based on the QFT method. Included are design details and graphs which do not appear in the literature, which will enable engineers and researchers to understand QFT in greater depth. Engineers will be able to apply QFT and the design techniques to many applications, such as flight and chemical plant control, robotics, space, vehicle and military industries, and numerous other uses. All of the examples were implemented using Matlab® Version 5.3; the script file can be found at the author's Web site. QFT results in efficient designs because it synthesizes a controller for the exact amount of plant uncertainty, disturbances and required specifications. Quantitative Feedback Design of Linear and Nonlinear Control Systems is a pioneering work that illuminates QFT, making the theory - and practice - come alive.