[PDF] Mechanics Of Time Dependent Materials And Processes In Conventional And Multifunctional Materials Volume 3 eBook

Author : Tom Proulx
Publisher : Springer Science & Business Media
Page : 295 pages
File Size : 27,1 MB
Release : 2011-05-21
Category : Technology & Engineering
ISBN : 1461402131

GET BOOK

Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials; MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Author : Bonnie Antoun
Publisher : Springer Science & Business Media
Page : 184 pages
File Size : 14,61 MB
Release : 2013-08-28
Category : Technology & Engineering
ISBN : 3319008528

GET BOOK

Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2: Proceedings of the 2013 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Metallic, Polymeric and Composite Materials Effects of Extreme Environments including Radiation Resistance, Damage, and Aging Challenges in Time-dependent Behavior Modeling of Low, Moderate and High Strain Rates Effects of Frequency and Hysteretic Heating Effects of Inhomogeneities on the Time-Dependent Behavior Composite, Hybrid and Multifunctional Materials Challenges in Time-dependent Behavior Modeling Viscoelastoplasticity and Damage Effects of Interfaces and Interphases on the Time-Dependent Behavior Environmental and Reactive Property Change Effects on Thermomechanical and Multifunctional Behaviors Modeling and Characterization of Fabrication Processes of Conventional and Multifunctional Materials Time-dependent and Small-scale Effects in Micro/Nano-scale Testing Time-dependent Processes in Biomaterials

Author : H. Jerry Qi
Publisher : Springer
Page : 193 pages
File Size : 37,20 MB
Release : 2014-07-25
Category : Technology & Engineering
ISBN : 3319069802

GET BOOK

Challenges in Mechanics of Time-Dependent Materials, Volume 2: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Metallic, Polymeric and Composite Materials o Effects of Extreme Environments including Radiation Resistance, Damage, and Aging o Challenges in Time-dependent Behavior Modeling of Low, Moderate and High Strain Rates o Effects of Inhomogeneities on the Time-Dependent Behavior o Time dependent granular materials · Composite, Hybrid and Multifunctional Materials o Challenges in Time-dependent Behavior Modeling Viscoelastoplasticity and Damage o Effects of Interfaces and Interphases on the Time-Dependent Behavior · Mechanics of materials from advanced manufacturing, such as additive manufacturing o Property characterization from AM o Process modeling and simulations of AM o Material design using AM · Time-dependent and Small-scale Effects in Micro/Nano-scale Testing

Author : Bonnie Antoun
Publisher : Springer
Page : 0 pages
File Size : 17,55 MB
Release : 2014-12-16
Category : Technology & Engineering
ISBN : 9781489998361

GET BOOK

Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2 represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.

Author : W. Carter Ralph
Publisher : Springer
Page : 292 pages
File Size : 32,77 MB
Release : 2016-11-03
Category : Technology & Engineering
ISBN : 3319417665

GET BOOK

Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 7 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Recycled-Constituent Composites Nano and Particulate Composites Damage Detection and Non-Destructive Evaluation of Composites Fracture and Fatigue Novel Developments in Composites Additive Manufacturing of Composites Mechanics of Graphene & Graphene Oxide Smart Materials Novel Developments in Composites Manufacturing and Joining of Composites

Author : Simon Quinn
Publisher : Springer
Page : 198 pages
File Size : 35,71 MB
Release : 2016-09-19
Category : Technology & Engineering
ISBN : 3319422553

GET BOOK

Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Damage Analysis from Thermal Measurements Quantitative Visualization Stress Analysis from Thermal Measurements New Approaches to Residual Stress Measurement Residual Stress & Optical Methods Non-homogeneous Parameters Identification General Inverse Methods Residual Stress Measurement by X-Ray Diffraction

Author : Helena Jin
Publisher : Springer Science & Business Media
Page : 433 pages
File Size : 13,72 MB
Release : 2012-09-22
Category : Science
ISBN : 1461442354

GET BOOK

Imaging Methods for Novel Materials and Challenging Applications, Volume 3: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the third volume of seven from the Conference, brings together 62 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: Role of optical interferometry in advancement of material characterization Three-dimensional imaging and volumetric correlation Digital holography and experimental mechanics Digital image correlation Metrology and displacement measurement at different scales Optical methods for dynamic tests Optical methods for and with MEMS and NEMS Thermomechanics and infrared imaging Imaging methods applied to biomaterials and soft materials Applied photoelasticity Optical measurement systems using polarized light Hybrid imaging techniques Contouring of surfaces Novel optical techniques

Author : Helena Jin
Publisher : Springer Science & Business Media
Page : 376 pages
File Size : 13,36 MB
Release : 2013-08-30
Category : Technology & Engineering
ISBN : 3319007688

GET BOOK

Advancement of Optical Methods in Experimental Mechanics: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: Optical metrology and displacement measurements at different scales Digital holography and experimental mechanics Optical measurement systems using polarized light Surface topology Digital image correlation Optical methods for MEMS and NEMS Three-dimensional imaging and volumetric correlation Imaging methods for thermomechanics applications 3D volumetric flow measurement Applied photoelasticity Optical residual stress measurement techniques Advances in imaging technologies

Author : Carlos E. Ventura
Publisher : Springer Science & Business Media
Page : 420 pages
File Size : 38,55 MB
Release : 2012-11-29
Category : Technology & Engineering
ISBN : 1461442265

GET BOOK

Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: Fracture & Fatigue Microscale & Microstructural Effects in Fatigue & Fracture Material Applications Composite Characterization Using Digital Image Correlation Techniques Multi-Scale Simulation and Testing of Composites Residual Stress Inverse Problems/Hybrid Methods Nano-Composites Microstructure Material Characterization Modeling and Uncertainty Quantification Impact Behavior of Composites

Author : G P Tandon
Publisher : Springer Science & Business Media
Page : 252 pages
File Size : 48,61 MB
Release : 2013-08-28
Category : Science
ISBN : 3319008730

GET BOOK

Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the sixth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Characterization of Energy Storage Materials Microvascular & Natural Composites Nanocomposites for Multifunctional Performance Composite/Hybrid Characterization Using Digital Image Correlation Failure Behavior of Polymer Matrix Composites Non-Destructive Testing of Composites Composite Test Methods Joints/Bonded Composites