[PDF] Masonry Structural Design Second Edition eBook

Author : Richard E. Klingner
Publisher : McGraw Hill Professional
Page : 589 pages
File Size : 36,79 MB
Release : 2010-02-08
Category : Technology & Engineering
ISBN : 0071638318

GET BOOK

A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms

Author : Jennifer Eisenhauer Tanner
Publisher : McGraw Hill Professional
Page : 527 pages
File Size : 16,67 MB
Release : 2017-05-21
Category : Technology & Engineering
ISBN : 1259641767

GET BOOK

Thoroughly Updated Coverage of Masonry Codes, Materials, and Structural Design This fully revised resource covers the design of masonry structures using the 2015 International Building Code, the ASCE 7-10 loading standard, and the TMS 402-13 and TMS 602-13 design and construction standards. The book emphasizes the strength design of masonry and includes allowable-stress provisions. The latest advances, materials, and techniques are clearly explained. Chapter-long case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the topics presented. Masonry Structural Design, Second Edition, covers: • Structural behavior and design of low-rise, bearing wall buildings • Materials used in masonry construction • Code basis for structural design of masonry buildings • Basics of seismic design in masonry buildings • Introduction to MSJC treatment of structural design • Strength design of reinforced and unreinforced masonry elements • Allowable-stress design of reinforced and unreinforced masonry elements • Comparison of design by the allowable-stress approach versus the strength approach • Lateral load analysis of shear wall structure • Design and detailing of floor and roof diaphragms • Structural design of AAC masonry

Author : Chanakya Arya
Publisher : CRC Press
Page : 523 pages
File Size : 39,24 MB
Release : 2009-05-07
Category : Technology & Engineering
ISBN : 0203926501

GET BOOK

This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.

Author : Narendra Taly
Publisher : McGraw Hill Professional
Page : 753 pages
File Size : 26,36 MB
Release : 2010-06-05
Category : Technology & Engineering
ISBN : 0071593675

GET BOOK

The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second edition, presents the latest methods for designing strong, safe, and economical structures with reinforced masonry. The book is packed with more than 425 illustrations and a wealth of new, detailed examples. This state-of-the-art guide features strength design philosophy for reinforced masonry structures based on ASCE 7-05 design loads for wind and seismic design. Written by an internationally acclaimed author, this essential professional tool takes you step-by-step through the art, science, and engineering of reinforced masonry structures. COVERAGE INCLUDES: Masonry units and their applications Materials of masonry construction Flexural analysis and design Columns Walls under gravity and transverse loads Shear walls Retaining and subterranean walls General design and construction considerations Anchorage to masonry Design aids and tables

Author : James E. Amrhein
Publisher : CRC Press
Page : 524 pages
File Size : 23,14 MB
Release : 1998-03-05
Category : Technology & Engineering
ISBN : 9780849375514

GET BOOK

The Reinforced Masonry Engineering Handbook provides the coefficients, tables, charts, and design data required for the design of reinforced masonry structures. This edition improves and expands upon previous editions, complying with the current Uniform Building Code and paralleling the growth of reinforced masonry engineering. Discussions include: materials strength of masonry assemblies loads lateral forces reinforcing steel movement joints waterproofing masonry structures and products formulas for reinforced masonry design retaining walls and more This comprehensive, useful book serves as an exceptional resource for designers, contractors, builders, and civil engineers involved in reinforced masonry - eliminating repetitious and routine calculations as well as reducing the time for masonry design.

Author : J. R. Ubejd Mujagic
Publisher : McGraw Hill Professional
Page : 448 pages
File Size : 35,5 MB
Release : 2012-04-02
Category : Technology & Engineering
ISBN : 0071767932

GET BOOK

A concise guide to the structural design of low-rise buildings in cold-formed steel, reinforced masonry, and structural timber This practical reference discusses the types of low-rise building structural systems, outlines the design process, and explains how to determine structural loadings and load paths pertinent to low-rise buildings. Characteristics and properties of materials used in the construction of cold-formed steel, reinforced masonry, and structural timber buildings are described along with design requirements. The book also provides an overview of noncomposite and composite open-web joist floor systems. Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations. Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber covers: Low-rise building systems Loads and load paths in low-rise buildings Design of cold-formed steel structures Structural design of reinforced masonry Design of structural timber Structural design with open-web joists

Author : Fiona Cobb
Publisher : Elsevier
Page : 412 pages
File Size : 28,38 MB
Release : 2009
Category : Technology & Engineering
ISBN : 0750686863

GET BOOK

"Now in its second edition, the Structural Engineer's Pocket Book is a comprehensive pocket reference guide for professional and student structural engineers, particularly those taking the iStructE Part 3 Exam. The combination of tables, data, facts, formulae and rules of thumb make it a valuable aid in scheme design for structural engineers in the office, in transit or on site." "Concise and precise, this second edition is updated to reflect changes to the British Standards, which are used and referenced throughout, as well as the addition of a new section on sustainability. Other subject areas include timber, masonry, steel, concrete, aluminium and glass." --Book Jacket.