[PDF] Control Relevant Design Of Scramjet Powered Hypersonic Vehicles With Aero Thermo Elastic Propulsive Effects And Uncertainty eBook

Author : Akshay Shashikumar Korad
Publisher :
Page : 191 pages
File Size : 11,41 MB
Release : 2010
Category : Flight control
ISBN :

GET BOOK

This thesis examines the modeling, analysis, and control system design issues for scramjet powered hypersonic vehicles. A nonlinear three degrees of freedom longitudinal model which includes aero-propulsion-elasticity effects was used for all analysis. This model is based upon classical compressible flow and Euler-Bernouli structural concepts. Higher fidelity computational fluid dynamics and finite elementmethods are needed formore precise intermediate and final evaluations. The methods presented within this thesis were shown to be useful for guiding initial control relevant design. The model was used to examine the vehicles static and dynamic characteristics over the vehicles trimmable region. The vehicle has significant longitudinal coupling between the fuel equivalency ratio (FER) and the flight path angle (FPA). For control system design, a two-input two-output plant (FER - elevator to speed-FPA) with 11 states (including 3 flexible modes) was used. Velocity, FPA, and pitch were assumed to be available for feedback.

Author : Jaidev Khatri
Publisher :
Page : 220 pages
File Size : 12,18 MB
Release : 2011
Category : Airbreathing launch vehicles
ISBN :

GET BOOK

This thesis examines themodeling, analysis, and control system design issues for scramjet powered hypersonic vehicles. A nonlinear three degrees of freedom longitudinal model which includes aero-propulsion-elasticity effects was used for all analyses. This model is based upon classical compressible flow and Euler-Bernouli structural concepts. Higher fidelity computational fluid dynamics and finite element methods are needed for more precise intermediate and final evaluations. The methods presented within this thesis were shown to be useful for guiding initial control relevant design. The model was used to examine the vehicle's static and dynamic characteristics over the vehicle's trimmable region. The vehicle has significant longitudinal coupling between the fuel equivalency ratio (FER) and the flight path angle (FPA). For control system design, a two-input two-output plant (FER - elevator to speed-FPA) with 11 states (including 3 flexible modes) was used. Velocity, FPA, and pitch were assumed to be available for feedback. Aerodynamic heat modeling and design for the assumed TPS was incorporated to original Bolender's model to study the change in static and dynamic properties. De-centralized control stability, feasibility and limitations issues were dealt with the change in TPS elasticity, mass and physical dimension. The impact of elasticity due to TPS mass, TPS physical dimension as well as prolonged heating was also analyzed to understand performance limitations of de-centralized control designed for nominal model.

Author : Jeffrey James Dickeson
Publisher :
Page : 169 pages
File Size : 36,40 MB
Release : 2012
Category : Hypersonic planes
ISBN :

GET BOOK

This report provides an overview of scramjet-powered hypersonic vehicle modeling and control challenges. Such vehicles are characterized by unstable non-minimum phase dynamics with significant coupling and low thrust margins. Recent trends in hypersonic vehicle research are summarized. To illustrate control relevant design issues and tradeoffs, a generic nonlinear 3DOF longitudinal dynamics model capturing aero-elastic-propulsive interactions for wedge-shaped vehicle is used. Limitations of the model are discussed and numerous modifications have been made to address control relevant needs. Two different baseline configurations are examined over a two-stage to orbit ascent trajectory. The report highlights how vehicle level-flight static (trim) and dynamic properties change over the trajectory. Thermal choking constraints are imposed on control system design as a direct consequence of having a finite FER margin. The implication of this state-dependent nonlinear FER margin constraint, the right half plane (RHP) zero, and lightly damped flexible modes, on control system bandwidth (BW) and FPA tracking has been discussed. A control methodology has been proposed that addresses the above dynamics while providing some robustness to modeling uncertainty. Vehicle closure (the ability to fly a trajectory segment subject to constraints) is provided through a proposed vehicle design methodology. The design method attempts to use open loop metrics whenever possible to design the vehicle. The design method is applied to a vehicle/control law closed loop nonlinear simulation for validation. The 3DOF longitudinal modeling results are validated against a newly released NASA 6DOF code.

Author : Ernst Heinrich Hirschel
Publisher : Springer Science & Business Media
Page : 512 pages
File Size : 42,82 MB
Release : 2009-11-26
Category : Technology & Engineering
ISBN : 354089974X

GET BOOK

In this book selected aerothermodynamic design problems in hypersonic vehicles are treated. Where applicable, it emphasizes the fact that outer surfaces of hypersonic vehicles primarily are radiation-cooled, an interdisciplinary topic with many implications.

Author : Giuseppe Pezzella
Publisher : BoD – Books on Demand
Page : 150 pages
File Size : 45,62 MB
Release : 2019-10-02
Category : Science
ISBN : 1839622695

GET BOOK

In the aviation field there is great interest in high-speed vehicle design. Hypersonic vehicles represent the next frontier of passenger transportation to and from space. However, several design issues must be addressed, including vehicle aerodynamics and aerothermodynamics, aeroshape design optimization, aerodynamic heating, boundary layer transition, and so on. This book contains valuable contributions focusing on hypervelocity aircraft design. Topics covered include hypersonic aircraft aerodynamic and aerothermodynamic design, especially aeroshape design optimization, computational fluid dynamics, and scramjet propulsion. The book also discusses high-speed flow issues and the challenges to achieving the dream of affordable hypersonic travel. It is hoped that the information contained herein will allow for the development of safe and efficient hypersonic vehicles.

Author : Sanketh Bhat
Publisher :
Page : pages
File Size : 11,15 MB
Release : 2008
Category :
ISBN :

GET BOOK

ABSTRACT: Hypersonic flight is seen as a feasible solution to make space travel faster, safer and more affordable. The design of the Air-breathing hypersonic vehicle is such that there is coupling between the structure and the propulsion system. Therefore, the aerodynamic, propulsion and the structural effects must be accounted to effectively model the vehicle. The vibrations from the structure affect the performance of the vehicle. Hence, vibration attenuation is a critical requirement for hypersonic vehicles. The problems of vibration are compounded by variations in heating during flight. Structural variations resulting from the tremendous heating incurred during hypersonic flight is mitigated by a thermal protection system (TPS); however, such mitigation is accompanied by an increase in weight that can be prohibitive. The actual design of a thermal protection system can be chosen to vary the level of heating reduction, and associated weight, across the structure.

Author : Benjamin R. Szpak
Publisher :
Page : 33 pages
File Size : 37,18 MB
Release : 2009
Category :
ISBN :

GET BOOK

Abstract: Air-breathing hypersonic vehicles have risen to the forefront of the aerospace research community in reaction to the requirements of NASA and the US Air Force. NASA has interest in developing a next generation Reusable Launch Vehicle and the US Air Force is interested in an unmanned hypersonic vehicle. Recent research has focused on developing comprehensive models in order to successfully design a vehicle capable of operating in the severe hypersonic environment. Due to the layout of this class of vehicle, where the propulsion system is fully integrated into the lifting body fuselage, a tight coupling exists between the airframe, propulsion system, control system, and aerodynamics. This characteristic necessitates a multi-disciplinary approach to modeling for control design. To achieve this, a simplified model of each subsystem is needed to efficiently perform a multi-disciplinary analysis. Two important and challenging areas for multi-disciplinary modeling are the incorporation of complex aerodynamic and aerothermoelastic phenomena. The focus of this research is on the development of a model for the control surface. Specifically an aerothermoelastic model, based on a plate representation, has been developed for the vehicle control surface. This model was adapted from a previous model, developed at the Air Force Research Laboratory, to incorporate important characteristics such as taper and sweep of the control surface. Thus, the model more realistically represents the geometry of a control surface for a hypersonic vehicle. The structural model developed was then verified using finite element analysis to compare the free vibration frequencies and modeshapes. Since the structural dynamic characteristics of a solid plate are not compatible to those of a shell structured wing, the structural properties were modified to match the first two frequencies of a representative wing, namely the F-104 Lockheed Starfighter wing. As the temperature of a plate increases, the first two frequencies begin to coalesce. This coalescence of frequencies leads to a phenomena known as flutter. As the temperature of the plate was increased the aerothermoelastic response was computed at a constant Mach number until the onset of flutter. By implementing a flexible control surface model, the response of the wing to control inputs and fuselage deformations could also be investigated. Both of these effects are modeled as base motion of the cantilevered plate. Second order piston theory, a commonly used model for hypersonic aerodynamics, was used to calculate the aerodynamic forces on the plate. Results presented provide insight into the importance of aerothermoelastic effects for control oriented modeling, as well as the effect of plate sweep and taper compared to a simple square plate representation.