[PDF] Combined Heat And Power eBook

Author : Paul Breeze
Publisher : Academic Press
Page : 103 pages
File Size : 26,83 MB
Release : 2017-11-30
Category : Science
ISBN : 0128129093

GET BOOK

Combined Heat and Power Generation is a concise, up-to-date and accessible guide to the combined delivery of heat and power to anything, from a single home to a municipal power plant. Breeze discusses the historical background for CHP and why it is set to be a key emission control strategy for the 21st Century. Various technologies such as piston engines, gas turbines and fuel cells are discussed. Economic and environmental factors also are considered and analyzed, making this a very valuable resource for those involved with the research, design, implementation and management of the provision of heat and power. Discusses the historical background of combined heat and power usage and why CHP is seen as a key emission control strategy for the 21st Century Explores the technological aspects of CHP in a clear and concise style and delves into various key technologies, such as piston engines, steam and gas turbines and fuel cells Evaluates the economic factors of CHP and the installation of generation systems, along with energy conversion efficiencies

Author : R Beith
Publisher : Elsevier
Page : 553 pages
File Size : 34,70 MB
Release : 2011-04-30
Category : Technology & Engineering
ISBN : 0857092758

GET BOOK

Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance. Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems. Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology. With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. Reviews small- and micro-CHP systems and their techno-economic and performance assessment Explores integration into distributed energy systems and their increasing utilisation of biomass fuels Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines

Author : Maciej M. Sokołowski
Publisher : Routledge
Page : 269 pages
File Size : 34,2 MB
Release : 2020-03-11
Category : Business & Economics
ISBN : 1000043177

GET BOOK

This book provides an analysis of the European policy approach to combined heat and power (CHP), a highly efficient technology used by all EU Member States for the needs of generating electricity and heat. European Law on Combined Heat and Power carries out an assessment of the European legal and policy measures on CHP, evaluating how it has changed over the years through progress and decline in specific member states. Over the course of the book, Sokołowski explores all aspects of CHP, examining the types of measures used to steer the growth of cogeneration in the EU and the policies and regulatory tools that have influenced its development. He also assesses the specific role of CHP in the liberalisation of the internal energy market and EU action on climate and sustainability. Finally, by delivering his notions of "cogenatives", "cogenmunities", or "Micro-Collective-Flexible-Smart-High-Efficiency cogeneration", Sokołowski considers how the new EU energy package – "Clean energy for all Europeans" – will shape future developments. This book will be of great interest to students and scholars of energy law and regulation, combined heat and power and energy efficiency, as well as policy makers and energy experts working in the CHP sector.

Author : J. H. Horlock
Publisher : Krieger Publishing Company
Page : 226 pages
File Size : 17,9 MB
Release : 1997-01-01
Category : Technology & Engineering
ISBN : 9780894649288

GET BOOK

This text provides an introduction to all aspects of combined heat and power (CHP) thermodynamics, design, economics and utilization. Emphasis is placed on the performance of CHP plants compared to conventional plants, and the economic considerations in combined heat and power utilization. There are many CHP installations in commission and, where applicable, the text describes practical examples of CHP use.

Author :
Publisher :
Page : 368 pages
File Size : 42,15 MB
Release : 2015-05-26
Category : TECHNOLOGY & ENGINEERING
ISBN : 9781936504879

GET BOOK

"Current, authoritative guide on implementing combined heat and power (CHP) systems that provide electricity and useful thermal energy in a single, integrated system. Covers available technologies, site assessment, system design, installation, operation, and maintenance, with detailed case studies and a glossary. In dual units, Inch-Pound (I-P) and International System (SI)"--

Author : Badea, Gheorghe
Publisher : IGI Global
Page : 332 pages
File Size : 45,8 MB
Release : 2021-04-30
Category : Technology & Engineering
ISBN : 1799849465

GET BOOK

Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality. Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students.

Author : David H. Thomas
Publisher :
Page : 0 pages
File Size : 43,53 MB
Release : 2010
Category : Biomass energy
ISBN : 9781616683412

GET BOOK

Combined Heat and Power (CHP) is the sequential or simultaneous generation of multiple forms of useful energy (usually mechanical and thermal) in a single, integrated system. CHP systems consist of a number of individual components-prime mover (heat engine), generator, heat recovery, and electrical interconnection-configured into an integrated whole. This book reviews the technical and economic characterisation of biomass resources, biomass preparation, energy conversion technologies, power production systems, and complete integrated systems.

Author : Y. P. Abbi
Publisher : The Energy and Resources Institute (TERI)
Page : 288 pages
File Size : 21,8 MB
Release : 2012-01-01
Category : Business & Economics
ISBN : 8179933113

GET BOOK

The availability of fossil fuels required for power plants is reducing and their costs increasing rapidly. This gives rise to increase in the cost of generation of electricity. But electricity regulators have to control the price of electricity so that consumers are not stressed with high costs. In addition, environmental considerations are forcing power plants to reduce CO2 emissions. Under these circumstances, power plants are constantly under pressure to improve the efficiency of operating plants, and to reduce fuel consumption. In order to progress in this direction, it is important that power plants regularly audit their energy use in terms of the operating plant heat rate and auxiliary power consumption. Energy Audit of Thermal Power, Combined Cycle, and Cogeneration Plants attempts to refresh the fundamentals of the science and engineering of thermal power plants, and establishes its link with the real power plant performance data through case studies, and further developing techno-economics of the energy efficiency improvement measures. This book will rekindle interest in energy audits and analysis of the data for designing and implementation of energy conservation measures on a continuous basis.

Author : Math H. J. Bollen
Publisher : John Wiley & Sons
Page : 526 pages
File Size : 18,79 MB
Release : 2011-08-04
Category : Technology & Engineering
ISBN : 111802902X

GET BOOK

The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.